Page 1
Before using your washing machine, please read this
manual carefully and keep it for future reference.
Twin Tub Washing Machine
OWNER’S MANUAL
PAL800TT
Read This Manual
Inside you will find many helpful hints on how to
use and maintain your properly.
Just a little preventative care on your part can
save you a great deal of time and money over the
life of your . You'll find many
answers to common problems in the chart of
troubleshooting tips. If you review the chart of
troubleshooting tips first, you may not need to call
for service.
washing machine
washing machine
Page 2
Safety Precaution
Attention To Installation
Lay upper drain hose
Change the position of the drain hose
Installation site
Preparation Instructions
Reference of laundry quantity
corresponding to different capacities
Laundry volume and detergent
dosage reference
Name Of Parts
Accessories
Introduction Of Control Panel
Quick Start
Washing Method
Rinsing Method
Spinning Method
Efficiency Program
Special Features
Soak function
Buzzer function
The dual voltage
Attention To Maintenance
Cabinet maintenance
Cleaning the lint filter
Anti-freezing protection
Operation when objects are
dropped into outside of the spin tub
Notes
Main Technical Parameters
SAFETY PRECAUTIONTABLE OF CONTENTS
Safety Precaution
1
2
2
2
2
3
3
3
4
4
4
5
5
5
6
7
7
7
7
7
8
8
8
8
8
8
9
Be sure to comply with the following to prevent damage to body and property of you and others:
The sign stands for “pay attention” , and the picture of specific items needs attention shows in .
The sign stands for “forbid”, and the picture of specific items forbidden shows in .
The sign stands for “must do”, and the picture of specific items must be done shows in .
Do no t disma ntle th e machi ne
by yo ursel f.
Forb id dism antli ng
Do no t let bab y sit on it o r place
hea vy thin gs on it.
Forb id
To avoi d elect ric sho ck
res ultin g from el ectri c leaka ge,
ple ase con nect gr oundi ng wire
of th e plug pr operl y.
Grou ndin g
Wip e o
ff di rty and d
us
plu g o
fte n to prev ent poo r
con
t
act w
Ins ert the p lug tig htly wh en
use .
t on th e
ith p ower su pply.
Do no t insta ll the ma chine i n
dam p or rain y envir onmen t to
avo id elec tric sh ock, fi re,
mac hine fa ilure ,or def ormat ion.
Avoi d dampn ess
Do n
ot wa sh clot he
s
tai ne
d wit h keros
alc ohol, a
s
ubs tance .
Forb id
Do n
ot le t baby cl imb to th
mac hine or p
tub t o avoid a
Forb id
Do no t put han ds into t he tub
bef ore it st oppin g runni ng.
Forb id putt ing in to
Do no t pull th e cord wh en
unp lug the p lug.
s tha t are
ene , p
nd o
the r fl
amm a
lay n ear run ning
cci de
nt.
etr ol,
ble
e
Do no t place i nflam mable
mat erial s like bu rning c andle ,
mos quito i ncens e, ciga ret etc .
or he ating s ource l ike ele ctric
sto ve, cal orifi er etc. o n the
mac hine.
Forb id
Mak e sure th at the wa ter inl et
hos e is conn ected a nd the ta p
is op ened be fore wa shing .
+
If us e warm wa ter, the w ater
tem perat ure sho uld not
exc eed 50℃.
Forb id
Do no t repla ce powe r cord by
you rself .
Forb id
Do no t inser t or unpl ug the pl ug
wit h wet han ds to avo id elec tric
sho ck.
Do no t spray w ater di rectl y to
the m achin e.
Avoi d spray ing wat er
Do no t excee d the max . water
lev el to avo id wate r overf lowin g
and m achin e failu re.
Forb id
Do no t wash do wn-fi lled co at,
rai ncoat o r simil ar clot hes.
Forb id
Do n
ot da mage th e po
and p lug to av oid ele ctric
s
hoc k , short c ircui t or fi
Forb id
Unp lug the p lug fro m socke t
aft er use.
+
waterp roof
wer c ord
re.
Forb id wet ha nds
-1-
Unp lug the p lug
Page 3
Usage methodInstallation
Attention To Installation
Lay upper drain hose
●
Needs a drain hose with minimum diameter 3 cm, and minimum carry away capacity of
40 liters per minute.
For upper drain system, the drain hose must be placed at least 86 cm(30 inches) from the
●
bottom of washer , but not higher than 100 cm.
86cm<H<100cm
Change the position of the drain hose
The ex-factory installation position of the drain
hose is located the spin side . According to the
installation site, the drain hose can also be installed
at the wash side of the machine . The method is
as follows:
①
Unplug the power cord and empty water in the drain
hose completely.
②
Spread a piece of soft cloth on the floor (e.g. a blanket)
and place the washing machine on it gently.
③
Take the drain hose out from the buckle at the
spin side, and put it into the buckle at the wash side.
Hang up the drain hose kit.
④
at
of
FOR UPPER DRAIN SYSTEM ONLY
Front
Drain hose
Buckle
FOR LOWER DRAIN SYSTEM ONLY
Blanket
Preparation Instructions
Plug in power and connect the water inlet hose.
●
● Lay down the lower drain hose and connect it to the sewer , or lay the upper drain hose to places as
indicated in page 2.
● Check that there are no objects such as coins, hairpins, mud or sand in the pocket.
● Strings should be knotted in advance to prevent entanglement.
● Clothes can be classified for washing according to the texture, dirty
● For small pieces (e.g.,stockings) or fluffy clothes, put them into a nylon net
Attachment: Reference of laundry quantity corresponding to different capacities
Laundry
Capacity
2.0kg Capacity about 4 pcs. about 3 pcs. about 2 pcs. about 1 pcs.
3.0kg Capacity about 6 pcs. about 4 pcs. about 3 pcs. about 1 pcs.
3.6kg Capacity about 7 pcs. about 5 pcs. about 4 pcs. about 2 pcs.
4.6kg Capacity about 9 pcs. about 6 pcs. about 5 pcs. about 2 pcs.
5.0kg Capacity about 10 pcs. about 7 pcs. about 5 pcs. about 3 pcs.
5.5kg Capacity about 11 pcs. about 8 pcs. about 6 pcs. about 3 pcs.
6.0kg Capacity about 12 pcs. about 9 pcs. about 6 pcs. about 3 pcs.
7.0kg Capacity about 14 pcs. about 10 pcs. about 7 pcs. about 4 pcs.
7.5kg Capacity about 15 pcs. about 11 pcs. about 8 pcs. about 4 pcs.
8.0kg Capacity about 16 pcs. about 11 pcs. about 8 pcs. about 4 pcs.
8.5kg Capacity about 17 pcs. about 12 pcs. about 9 pcs. about 5 pcs.
10.0kg Capacity about 20 pcs. about 15 pcs. about 10 pcs. about 6 pcs.
12.0kg Capacity about 24 pcs. about 18 pcs. about 13 pcs. about 7 pcs.
Shirt
about 500 g
Uniform
about 650 g
...... ...... ...... ...... ......
degree and color.
Jeans
about 900 g
for washing.
Jacket
about 1600 g
Installation site
In order to avoid electrical failure, discoloration and deformation, do not install the machine
in the following places:
● Locations exposed
to direct sunlight
●
Locations exposed to rain
or snow
Locations with uneven
●
or unstable ground
●The figure above is for reference only, specific weights are subject to actual clothes.
Attachment :Laundry volume and detergent dosage reference
Fabric type
Synthetics,silk,
Delicate fabrics
Cotton or linen
Heavy soils
●The dosage of washing detergent varies according to dirty degree and texture of laundries.
Laundry
capacity(kg)
0-5.0
5.0-6.5
0-6.5
6.5-8.0
0-6. 5
6.6-8.0
Water
level
Low
Mid
Mid
High
Mid
High
Water flow
Gentle
Gentle
Normal
Wash time
(minutes)
3
3-5
7
7-10
10
10-35(soak 20)
Detergent
amount(g)
50
About
61
About
61
About
77
About
61
About
77
About
-3--2-
Page 4
Usage methodStructure Instruction
Name Of Parts
Wash cover
Lint filter
Wash tub
Pulsator
Base
Control panel
(For upper drain only)
Safety cover
Cabinet
Drain hose
Spin cover
Frame
Power plug
Drain hose
(For lower drain only)
Accessories
Inner spin cover
Water inlet hose
Introduction Of Control Panel
35
Soak
Wash timer
Wash timer
5
Water inlet
Water inlet
※he drawing above is for reference only, specific drawing is subject to actual models.T
●
Water inlet: be used to inject water.
Wash timer: be used to select required washing time.
●
Spin timer: be used to select required spinning time.
●
● Wash-Drain selector: For washing or rinsing, select “ Gentle”or“ Normal”. For Draining ,select “Drain”.
Normal
10
15
Wash-Drain selector
Gentle
Drain
Wash-Drain selector
Gentle
Normal
Drain
Spin timer
Spin timer
Water inlet
Water inlet
Quick Start
9.
1. Install the washing machine
2. Load the laundry
3. Add detergent and water
into the wash tub
4.
Turn the wash timer knob
to set wash time
5.
Set the wash drain selector to
“Drain” position after washing
Take out the laundry from
the spin tub
8.
Turn the spin timer knob
to set spin time
7. Move the laundry into the spin
tub and close the spin cover
6. Repeat the steps 3-5 for rinsing
Washing Method
1. Insert the inlet hose into the , and choose injectingwater water inlet mouth
water to the wash tub
Put the laundry into the wash tub, and add detergent into it.
2.
When fill water to half of the desired water level, turn off the
water tap and let laundries soak in the solution for minutes,
then fill water to desired water level.
3. Set wash program “Gentle” or “Normal” as per amount and texture of laundries.
4. Turn the wash timer knob to set wash time.
5. After washing, set the wash drain selector to “Drain” position for draining.
.
Wash timer
Water level indicator
Rinsing Method
A. Spraying rinse (rinse in the spin tub)
Put the laundry into the spin tub after washing.
①
Turn on the water tap, choose to fill water into the spin tub for 3-4 minutes, and then turn off the water tap.
②
Set the spin timer for 2-5 minutes for rinsing.
③
The above steps can be repeated.
④
①
Note: If there is red rust in water, do not choose spraying rinse, for the rust is easy to adhere to
laundries.
Ensure that do not fill water into spin tub when spinning.
②
-5--4-
Page 5
Usage methodUsage method
B. Common rinse (rinse in the wash tub)
①To save time, water and energy, can do pre-spinning before rinsing.
②Put laundries which have already been dehydrated into the wash tub.
③After filling water to the desired level, turn off the water tap to save water.
④Turn the “Wash selector” knob to the "Gentle” or “Normal”.
⑤Set the “wash timer”to the desired time (about 3-5 minutes)for rinsing.
⑥After rinsing, put the washing materials into the spin tub to spin for 1 to 5 minutes.
⑦Drain out the rinsing water in the wash tub.
⑧The above steps can be repeated.
Spin timer
Spinning Method
1.Shake out the laundry and put
them into the spin tub.
2.Put the inner spin cover on .
Confirm the inner spin cover is placed
horizontally.
Inner
spin cover
Spin tub
Correct
3.Close the safety cover and the
spin cover.
cover
Spin
Safety
cover
The appliance can not be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
The new hose supplied with the appliance are to be used and that old hose should not be used.
When choosing the water inflowing to wash tub or spin tub , please do not move the water inlet valve
during the process of water inflowing.
If strong vibration occurs in time of spinning, open the spin cover immediately. Make sure that the washing
machine is placed on a flat and stable floor ,and then adjust washing materials, distribute them evenly.
To do spinning and draining together, please spin for 1 minute before draining.
Do not wash or spin waterproof clothes or clothes that float easily to avoid abnormal vibration or damage
to the clothes.
4.Refer to the following table to select
spinning time.
Washing materials
Silk
Light clothes
(fiber/blended)
Knitwear (fiber)
Underwear
(cotton)
Slipover
(cotton/linen)
Toweling coverlet
(cotton)
Spin time
About 50
seconds
About 1
minute
About 1～2
minutes
About 2～3
minutes
About 3～4
minutes
About 5
minutes
the laundry
Incorrect
Spin timer
Efficiency Program
The tests were carrid out under program Normal. Below is the detail for test seting and steps;
1. Main wash: 30 min., H water level, wash temperature 40 ℃;
2.Spin: 3 min., 2 times; 4 kg test load for one turn;
3. Rinse: 3 min., L water level, water temperature 20 ℃;
4. Spin: 3 min., 2 times; 4 kg test load for one turn.
(For efficiency program only )
Special Features
A.Soak function (For machines having soak function only )
For seriously stained clothes, Soak wash is useful to achieve better wash result.
15-35 minutes of the wash timer is for soak wash:(illustrate as follows)
Total: 35 (mins)
This machine can wash blended blanket (less than 3 kg) marked with the "hand washing"
35
about 2
Work time
Static time
about 5 about 5about 5
about 1.5
about 1.5
15
(un it：)mins
label.Washing method is as follows:
Dilute detergent with water (below 50℃), then pour the solution into
①adequatethe wash tub.
Fold the blanket as shown in the figure, and into the wash tub.
②put it
● Fold in half along
the long edge
● 1/3 fold in the
same direction
Roll up the blanket●
B.Buzzer function (For machines having buzzer function only)
Function of the buzzer is to alarm finish of washing,and it is helpful to control wash process.
● Buzzer will alarm the completion of washing.
C.The dual voltage (For machines having the dual voltage function only)
The dual voltage washing machine can work at the voltage of 220V or 127V to meet needs of different
countries and areas.
● convert the voltage from 220V60Hz to 127V60Hz :
①
Unplug the washing machine plug to cut off the power supply.
②
Remove the back cover.
③
Take down the nylon clip, and remove the plastic bag.
④“”
Connect the Wash127V of the terminal connector with “Wash”, “Spin127V” with “Spin” , then the voltage
can be converted to “127V60Hz”.
⑤
Put the wires in order, wrap them in the plastic bag, and refix the back cover. Then the washing machine
can be powered for operation.
●
If convert the voltage from 127V60Hz to 220V60Hz:
①②③①③
Steps - are the same as above
④
Connect the “Wash 220V” of the terminal connector with “Wash”, “Spin 220V” with “Spin” to convert the
voltage to .
⑤⑤
In the step above, should connect the terminal connectors of both wash and spin, and make sure to
connect correctly.
*The factory-set voltage is 220V60Hz. Users can chose the voltage according to the regional voltage range.
220V60Hz
The step is the same as above
④
“”
Wash timer
Soak
Put into the tub with
●
blanket edge facing down
5
35
10
15
-7--6-
Page 6
MaintenanceMaintenance
Attention To Maintenance
Cabinet maintenance
After using the washing machine,wipe
the moisture and stain on it with a piece
of soft cloth.To avoid damage to the
surface,do not use corrosive or volatile
chemicals.
◆
pull the lint filter out.
◆
in water.
◆
to insert it into place.
◆
Anti-freezing protection
▲ To prevent from freezing:
Turn off the water tap, remove the water inlet hose and empty water in the
①water inlet
hose completely.
②
Lay the drain hose and turn the drain selector knob to the "Drain”position to
empty the water in the tub.
▲ If the water is frozen, please take the following steps:
Put the water inlet hose into warm water of about 50℃.
①
②
Keep about 2 liters of warm water below 50℃ in the wash tub for
about 10 minutes. and then lay the drain hose and turn the
wash drain selector knob to the "Drain”position to empty the water .
③
Fit the water inlet hose and turn on the water tap to
confirm water filling and draining work properly.
Operation when objects are
dropped into the outside of the spin tub
①Remove all screws on the frame with a screw driver and
loosen the connector of the brake belt .
②Pull up the frame with both hands and turn it backwards.
③Take out the clothes dropped into the outside of the spin tub.
④Fasten the connector of the brake belt ,Press the frame to
reset and tighten screws.
After you use the washing machine, never forget to do the following two things:
1. Disconnect the power plug.
2. Remove the water inlet hose.
-8-
Cleaning the lint filter
Press the button head, and
Turn the filter net inside out, and rinse it
After inserting the claw, press the button
A sound of “ba” means proper installation.
Button head
Claw
Frame
Cabinet
Notes
The washing machine employs alternative current with rated voltage and frequency . When voltage fluctuates
between -10% and 10% of the rated voltage, the machine can work normally.
Connection mode of the power cord of this machine is Y-shaped connection.Users
reconnect the wire by themselves.please contact the designated service center.
If this part needs to be repaired,
should not detach or
●Do not connect to the hot water supply.
After using, be sure to unplug the power plug.
●
●
Be sure to use plug that is properly grounded.
●
The maximum gradient of the supporting surface for the washing machine should not exceed 2º.
●
Do not tear down electrical wires and components in the machine by yourself.
●
There are holes on the base for ventilation. These holes should not be blocked by foreign objects
(carpets, etc.).
●
Never connect the grounding wire with the live wire, or it may lead to an electric shock.
●
If the power cord is damaged, it must be replaced by a qualified person to avoid a hazard.
If the following symptoms occur, please disconnect the power plug and perform the
following checks:
Symptom
The washing
machine does
not work.
The drain hose
does not work.
There is abnormal
noise during washing.
There is abnormal
noise and violent
vibration during
spinning.
Check that the power supply is in good condition.
●
Check that the power plug is inserted properly.
●
●
Check that the wash timer knob or the spin timer knob is not
in the "0" position.
●
Check that the drain hose is not laid too high.
●
Check that the drain hose is not frozen.
●
Check that the drain hose is not blocked by foreign matter.
Check that there are no coins or any other foreign objects
●
dropped into the wash tub.
●
Check that the washing machine is placed on flat, stable floor.
●
Check that clothes are evenly distributed in the spin tub.
●
Check that there are no washing materials or foaming debris
dropped into the outside of the spin tub.
Reason
Main Technical Parameters
Capacity (dry Clothes)
Power Supply
Input Power (lower drain)
Input Power (upper drain)
Maximum Time
Water volume
Maximum water pressure
Overall dimension
Net weight
Pump Input Power
Wash
8.0 kg
240V/50Hz
400W
400W
15 min. 35 min.(soak wash)
HI:77L H: 72L M: 61L L: 50L
0.6Mpa
870x512x944(mm)
Lower Drain System
23kg
Upper Drain System
23.5kg
30W
Spin
4.6kg
135W
135W
5 min.
/
-8-
-9-
Loading...