Palsonic PAL42BWF User Manual

PAL42BWF

42 Bottle Wine Cooler

Offering Australians quality since 1958 | www.palsonic.com.au

User’s Manual

1

This appliance is intended to be used exclusively for the storage of wine.

Ⅰ. GENERAL
PAL42BWF is extensively used in places such as hotels, offices and house. It is mostly suitable for conserving red wine, white wine and
champagne. It enjoys the advantages of small size, light weight, high efficiency and low energy consumption.

Ⅱ.UNPACKING, REPACKING AND MOVING

1.Unpacking
Just cut off the packing band, then pull the carton up.

2. Repacking
Please remember to put the original foamed pads in place.

3. Moving
Be sure electric wine cellar stays in upright position during moving it.
Do not tilt it for more than 45°from upright. Never upset it.
Do not apply force on any external part such as pipe, condenser, door and its handle for moving, electric wine cellar must be well
packed and secured in long distance transportation to avoid damage from impacting and or great rocking.

Ⅲ. INSTALLATION
The electric wine cellar should be placed on a flat and solid-top surface. It should be kept away from sunlight, heat source, humid or
mess place. The electric wine cellar should be kept away from the wall for a proper space for good air circulation. When the electric
wine cellar is placed in a cupboard, the rear of the cupboard must be removed out for good circulation. For good ventilation keep
enough space between the side walls and your fridge. Its back needs to be at least 100mm away from the wall, its sides at least
100mm separately and the height from over its top is not less than 200mm. A clear space should be left to open the door to 160°.

This fridge can be opened either from the left or right side. The default way of opening the door is from the right side. If you want to
open the door from the left side, please follow the instructions below.