Palsonic MODEL 5179G Owner's Manual

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL:[phone]

FAX:[phone]

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA:1300 657 888

51CM CORDLESS REMOTE COLOUR TELEVISION

MODEL: 5179

OWNER'S MANUAL

Type Tested

Electrical

Safety

AS/NZS 3250 Lic 4164

Standards Australia

APP No: N15959

Channel selection......................................11

Convenient Picture Controls...................12

Convenient Sound Controls.....................13

Other functions.........................................14

Remote controller...................................5

Back view.................................................4

Front view................................................4

Battery installation..................................3

Antenna connection.................................3

Cautions for safety...................................2

Features ...................................................1

Congratulations on your purchase of this Palsonic colour television receiver.

We recommend that you thoroughly read this manual before use to fully enjoy the many functions
and excellent effects of this receiver
Retain this manual in an easily accessible location for future reference.
* Screen displays and illustrations in this manual may differ from the actual ones for better
visibility.

Contents

INTRODUCTION OPERATION

Turning the Power On/Off.................6

Tuning in..............................................7

NOTES FOR OPERATION

INSTALLATION

To preset channels (Auto search)..........7

To preset channels (Manual search)......8

To skip unnecessary position numbers..9

MFT (Manual Fine Tuning)...................9

The setting of colour system................10

APPEARANCE

Sleep timer and to select the

language for OSD.................................14

CONNECTING OTHER EQUIPMENT

External Equipment Connections........15

To connect AV input terminals...........15

To connect TV output terminals...........15

OTHERS

Troubleshooting.......................................16

Specifications............................................16

English/Chinese on-screen menu display

INTRODUCTION

Features

Hyperband

100 preset channels

Auto-search, manual search

Intellectualized I C-bus control

Sleep timer, Auto Power-Off & blue background display

Four picture modes' setting

AUDIO/VIDEO input & output terminals

S-VHS Terminal

.
.
.
.
.
.
.
.

.

2

1

Advanced digital picture improvement circuit

.

1.

Built-in digital comb filter (NTSC system)
To attain the complete separation of brightness and colour signals, to reduce colour
interface, blurry and dotted interruptions, to make the picture clearer.
Black level stretching circuit
To extend the dynamic scope of the picture, to make the picture’s level clearer

2.

NOTES FOR OPERATION

Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please
turn off the power supply and remove the power plug. When it is to be left unattended for
a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to
avoid thunder strike.

Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted
on the TV set.

Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power

supply of the other type.

When an unusual situation
occurs, turn off the power
switch at once and remove the
plug from the wall outlet.
Contact a qualified service
department in your local area.

Do not expose the TV set to
rain or excessive moisture, to
prevent tire disaster or
electric shock. Avoid using
the set in very warm or damp
places. Never use it in a
bathroom.

There exists High Voltage in
this TV set. Do not remove
the cover to avoid danger.

The TV set should be placed
on an adequate place without
exposing it to direct sunlight
and other sources of heat to
prevent the deformation of the
cabinet or damage to components.

When the TV set is to be left
unattended, please turn off the
power switch and remove the
plug from the wall outlet.

In order to wipe dust off the
picture tube or off the cabinet,
you should remove the power
plug from the wall outlet first.
You can wipe lightly with a
piece of dry, clean, soft cloth.

Do not cover the Ventilating
holes in the cabinet. Keep a
space of more than 5cm from
the walls to the TV set, to
guarantee the good ventilation.

When the power cord or the
plug is damaged, please
contact a qualified service
department to get service.

Cautions for safety

2

*

*

Effective range of the remote
control operation

Antenna Connection

(1) Remove the back battery cover.

Installation

To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If
the signals are strong enough, you may use an indoor aerial.

Note: In case of using the
Twin-lead aerial feeder (300 )
for UHF/VHF aerial, use a 300-75
ohm adaptor (not supplied)

When using the coaxial cable (not
supplied) (75 ) for UHF/VHF
aerial, connect the plug into the
75 ohm aerial socket directly.

Note:

When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the
power switch on the TV while connecting the antenna lead.
In thunder and lightning weather, please disconnect the outdoor aerial to avoid thunder/lightning
strike.

(2) Insert two size AAA batteries according to

the polarity indication inside the remote
controller.

3

Notes:

When the remote controller is not used for
an extended period of time or the batteries
are worn out, please remove the batteries in
time to avoid battery leakage.

Avoid moisture and mechanical shock to
the remote controller.

Do not drop, dampen or disassemble the
remote controller.

Battery installation

1.

2.

3.

Front view

Back View

Appearance

Note: Functions of MENU, TV/AV, VOL , CH are also provided to the
remote controller.
* S-VHS is S-VIDEO.

4

CHANNEL UP
CHANNEL DOWN
VOLUME UP

POWER INDICATOR

POWER SWITCH
POWER INDICATOR

REMOTE SENSOR

PUSH TO OPEN

MENU
TV/AV

VOLUME DOWN

(2) AV2 IN
{S-VIDEO, VIDEO
AUDIO L/MONO, R}

(1) AV1 IN
{VIDEO, AUDIO L/MONO, R}

TV OUT
{VIDEO, AUDIO L/MONO, R}