Palsonic 5120G, 5120S, MODEL 5120 BGS Owner's Manual

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL:[phone]

FAX:[phone]

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA:1300 657 888

51CM CORDLESS REMOTE COLOUR TELEVISION

MODEL: 5120G

5120B
5120S

OWNER'S MANUAL

Type Tested

Electrical

Safety

AS/NZS 3250 Lic 4164

Standards Australia

APP No: N17340

ART SERIES

Sleep timer...................................................16

Playing Games.............................................15

SYSTEM setting.........................................14

CLOCK setting...........................................13

Convenient Picture and Sound Control....12

Channel selection.........................................11

AFT (Automatic Frequency Tuning).......10

MFT (Manual Fine Tuning)......................9

Menu Operation.....................................6

Tuning in.................................................7

Turning the Power On/Off....................6

Other functions............................................17

CALENDAR function..............................17

CHILD LOCK setting...............................17

CHANNEL SWAP...................................18

Super receiving function...........................18

Progam Scan.............................................18

CONNECTING OTHER EQUIPMENT

External Equipment Connections...........19

Video playback........................................19

Recording TV program............................19

OTHERS

Troubleshooting...........................................20

Specifications................................................21

Remote controller...................................5

Back view.................................................4

Front view................................................4

Battery installation..................................3

Antenna connection.................................3

Cautions for safety..................................2

Features ...................................................1

INTRODUCTION

NOTES FOR OPERATION

INSTALLATION

APPEARANCE

Contents

OPERATION

To preset channels (ASM).........................7

To preset channels (SEARCH)..................7

To skip unnecessary position numbers......9

The setting of colour and sound system..10

Congratulations on your purchase of this Palsonic colour television receiver.

We recommend that you thoroughly read this manual before use to fully enjoy the many functions
and excellent effects of this receiver.
Retain this manual in an easily accessible location for future reference.
* Screen displays and illustrations in this manual may differ from the actual ones for better visibility.

English/Chinese on-screen menu display

INTRODUCTION

Features

Hyperband

256 preset channels

Intellectualized I C-bus control

Full function remote control

Sleep timer, ON Timer, OFF Timer

Non-signal blue background display and AUTO-POWER-OFF function

Games, built-in 500 year calendar function

Child Lock function, Channel swap

.
.
.
.
.
.
.
.

.

2

1

Program scan function

Program scan function

Five picture modes' setting

AUDIO/VIDEO input & output terminals

.
.
.
.

Advanced digital picture improvement circuit

.

NOTES FOR OPERATION

Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please
turn off the power supply and remove the power plug. When it is to be left unattended for
a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to
avoid thunder strike.

Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted
on the TV set.

Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power

supply of the other type.

When an unusual situation
occurs, turn off the power
switch at once and remove the
plug from the wall outlet.
Contact a qualified service
department in your local area.

Do not expose the TV set to
rain or excessive moisture, to
prevent tire disaster or
electric shock. Avoid using
the set in very warm or damp
places. Never use it in a
bathroom.

There exists High Voltage in
this TV set. Do not remove
the cover to avoid danger.

The TV set should be placed
on an adequate place without
exposing it to direct sunlight
and other sources of heat to
prevent the deformation of the
cabinet or damage to components.

When the TV set is to be left
unattended, please turn off the
power switch and remove the
plug from the wall outlet.

In order to wipe dust off the
picture tube or off the cabinet,
you should remove the power
plug from the wall outlet first.
You can wipe lightly with a
piece of dry, clean, soft cloth.

Do not cover the Ventilating
holes in the cabinet. Keep a
space of more than 5cm from
the walls to the TV set, to
guarantee the good ventilation.

When the power cord or the
plug is damaged, please
contact a qualified service
department to get service.

Cautions for safety

2

*

*

Effective range of the remote
control operation

Antenna Connection

(1) Remove the back battery cover.

Installation

To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If
the signals are strong enough, you may use an indoor aerial.

Note: In case of using the
Twin-lead aerial feeder (300 )
for UHF/VHF aerial, use a 300-75
ohm adaptor (not supplied)

When using the coaxial cable (not
supplied) (75 ) for UHF/VHF
aerial, connect the plug into the
75 ohm aerial socket directly.

Note:

When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the
power switch on the TV while connecting the antenna lead.
In thunder and lightning weather, please disconnect the outdoor aerial to avoid thunder/lightning
strike.

(2) Insert two size AAA batteries according to

the polarity indication inside the remote
controller.

3

Notes:

When the remote controller is not used for
an extended period of time or the batteries
are worn out, please remove the batteries in
time to avoid battery leakage.

Avoid moisture and mechanical shock to
the remote controller.

Do not drop, dampen or disassemble the
remote controller.

Battery installation

1.

2.

3.

Front view

Back View

Appearance

Note: Functions of MENU, TV/AV, VOL+/-, CH+/- are also provided to the remote controller.

4

Remote Controller

Appearance

5

To turn the power on/off

1. Press the POWER switch, the red power indicator lights up.

.

Turning the Power On/Off & Menu Operation

OPERATION

*Note: If there are no input signals to the TV when the TV set is on, a blue background will appear on

If you want to turn off the TV temporarily, press the button on the remote controller to switch
the set to standby mode

The following describes how to turn the TV on/off using the TV's main switch and the remote

controller.

the screen. After 15 minutes if there are still no signals to the TV, it will enter into standby
mode automatically.

If no picture appears on the screen, press the button on the set or on the remote
controller to turn the set on and the yellow indicator light up.

3. Press the POWER switch to turn off the set completely.

Special indication:

Last-Mode-Memory: after turning off the power, the last TV mode, picture and sound setting mode and
preset channels all are memorised. Therefore, next time you turn on the TV, the TV will work in the
previous setting mode.

If you directly pressed the main power switch on the TV to turn it off, you must press the main
power switch to turn on the TV.

If you pressed the main power switch to turn off the TV when in standby mode, press the main
power switch and then operate from the remote controller to turn the TV on.

Auto-Power-Off : there are two kinds of Auto-Power-Off function:

1. If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically turn

2. SLEEP-timer function.

6

.
.

2.

off after about 10 minutes.

3. OFF timer function.

Menu Operation

Press MENU button to enter into cartoon graphics menu page, press MENU button or POS+/- button
repeatedly can select different graphics. The selected graphics is highlighted and the menu name will
appear above the graphics (each graphics represents a menu) . Press VOL+/- button to enter into the
sub-menu. To call, press RECALL button.

4.