Welcome to the purchase of our DVD player. For perfect operation and security
please read the manual carefully and keep it for future reference
Introduction
CAUTION:
WARNING:
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENT TO
ALERT THE USER TO THE PRESENCE OF
UNINSULATED "DANGEROUS VOLTAGE"
WITHIN THE UNIT'S CABINET THAT MAY
BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN
EQUILATERAL TRIANGLE IS INTENDED
TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING
AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE MANUAL
ACCOMPANYING THE UNIT.
THE UNIT EMPLOYS A LASER SYSTEM. TO
ENSURE THE PROPER USE OF THE UNIT, READ
THIS MANUAL CAREFULLY AND KEEP IT FOR
FUTURE REFERENCE.
IF THE UNIT REQUIRES SERVICING, CONTACT
THE SELLER OR OUR SERVICE CENTRE - SEE
"TROUBLE SHOOTING".
TO PREVENT DIRECT EXPOSURE TO THE LASER
RADIATION, DO NOT OPEN THE CABINET. VISIBLE LASER MAY RADIATE WHEN THE CABINET
OPENED OR THE INTERLOCKS ARE DEFEATED.
DO NOT STARE INTO THE LASER BEAMS.
CAUTION:
THE DVD VIDEO PLAYER IS A CLASS 1 LASER
PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD VIDEO
PLAYER IS HARMFUL TO THE EYES, DO NOT
ATTEMPT TO DISASSEMBLE THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL
ONLY.
TO PREVENT FIRE OR ELECTRIC SHOCKS, DO NOT
EXPOSE THE UNIT TO RAIN OR MOISTURE. NEVER
ATTEMPT TO OPEN THE CABINET, DANGEROUS
HIGH VOLTAGES ARE PRESENT IN THE UNIT. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION:
TO PREVENT ELECTRIC SHOCKS, MATCH WIDEBLADE PLUG WITH WIDE SLOT, FULLY INSERT.
THE APPARATUS SHALL NOT BE EXPOSED TO
DRIPPING OR SPLASHING AND THAT NO OBJECTS
FILLED WITH LIQUIDS SUCH AS VASES SHALL BE
PLACED ON THE APPARATUS.
WARNING:
FCC REGULATIONS STATE THAT ANY CHANGE
OR MODIFICATION TO THE EQUIPMENT, NOT
EXPRESSLY APPROVED BY MAKER OR ITS
AUTHORISED PARTIES, COULD VOID USERS
AUTHORITY TO OPERATE THIS EQUIPMENT.
Remark
PLEASE WRITE DOWN THE MODEL NO. AND
SERIAL NO. PRINTED ON THE REAR PANEL
AT THE BLANK BELOW.
Model No.
Serial No.
2
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Introduction
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer.
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for a long periods of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
3
Caution
Introduction
For safety, please use the original box and packing materials, and keep the mode
of packing same as the original.
When you repackage this product. Do not place this product near the volatile liquid
such as insecticide.
It is normal for the cover and rear panel become warm after the player has been
operating for a long time.
Do not move this product during playback. Otherwise, it may cause damage to the
pick-up and the disc.
Press OPEN/CLOSE on the front panel or remote to open or close the disc tray.
While it is opening or closing, do not push, or touch the tray.
4
Features
Full compatibility with DVD-AUDIO, DVD-VIDEO, SVCD, VCD, CD, MP3, HDCD, and Kodak picture CD,
CD-R & CD-RW (finalised).
Built-in Dolby Digital and HDCD decoder.
Screen saver.
Multiple playing modes: Program, Search, Repeat.
Optical and Coaxial digital audio output.
Dolby Digital 5.1 channel or DOWN MIX 2 channel output.
S-Video, Composite Video, and Component video outputs (progressive scan output).
Standby Function.
Full KARAOKE Function.
Automatic Software Updating.
Disc formats supported by this player:
Introduction
Dolby Digital system
Kodak Picture CDs
High Definition Compatible Digital
DVD VIDEO/DVD AUDIO
RESTRICTEDR
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorised by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Parental Lock
9
CC
32
8
16:9
LB
Multi-angle
Closed Caption
Subtitle choices
Audio choices
TV Aspect Ratio mode
The product complies with KODAK Picture CD format and will display KODAK Picture CDs. The "KODAK
Picture CD Compatible" logo is a trademark of Eastman Kodak Company and is used with permission.
HDCD®, High Definition Compatible Digital® and
pacific Microsonics™ are either registered trademarks or
trademarks of Pacific Microsonics, Inc. in the United States
and/or other countries. HDCD system manufactured under
license from pacific Microsonics, Inc. This product is covered
by one or more of the following: In the USA:
5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274,
5,854,600, 5,864,311, 5,872,531 and in Australia: 669114,
Other patents pending.
5
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works.
The figure above shows the front panel with all the displays on.
Illuminates when a DVD disc is loaded.
Wheel during playback.
Illuminates during menu play (VCD/SVCD).
Indicate the track number (CD/VCD/SVCD).
Indicates the total playing time on a disc.
Illuminates when audio is DOLBY out.
Illuminate during playback is paused.
Illuminate during repeat playback.
Repeat of chapter (DVD) / track (CD/VCD/SVCD).
Repeat of title (DVD) / entire disc contents (CD/VCD/SVCD).
Illuminates during playback.
Illuminate when an MP3 disc is loaded.
Illuminates VCD when a VCD disc is loaded and illuminate SVCD when a
Super-VCD disc is loaded and illuminate CD when a CD disc is loaded.
6
7
Remote Controller
Introduction
1
ON/STANDBY
2
TITLE
5
OSD
6
SETUP
7
PBC
8
PROGRESSIVE/
INTERLACE SCAN
11
SEARCH
13
ENTER
14
NAVIGATION
ARROWS
15
MEMORY
17
FORWARD SCAN
18
REVERSE SCAN
21
MUTE
22
PROGRAM
25
CHANNEL/AUDIO
27
ZOOM
4
OPEN/CLOSE
3
MENU
9
DIGIT KEYS
10
CLEAR
12
FOLLOW
16
RETURN
19
PREVIOUS
20
NEXT
23
REPEAT A-B
24
REPEAT
ANGLE
26
SUBTITLE
28
29
PAUSE/STEP
30
STOP
31
PLAY
8
Connecting to a TV Set (IS)
Connections
RED
WHITE
Component Video
VIDEO IN
AUDIO IN
L
VIDEO IN
S-VIDEO
VIDEO
R
Notes:
Set player's Downmix mode to "Stereo" in the Speaker Setup Page (See page 17).
There are three ways of connecting the player's AV output to the TV set:
1. YUV cord and left/right cable (set the [component] to [YUV], see page 25).
2. S-video cable and left/right audio cable (set the [component] to [off], see page 25).
3. Composite video cord and left/right audio cable (set the [component ] to [off], see page 25).
9
Connecting to a TV Set (PS)
RED
WHITE
Connections
VGA
VIDEO
Component Video
VGA
VIDEO IN
AUDIO IN
L
R
Notes:
1. YUV cord and left/right audio cable (set the [component] to [YUV] see page 25).
2. VGA cord and left/right audio cable (set the [component] to [VGA] see page 25).
3. Set the television's AV input to the channel you have connected.
4. Please make sure the Video Output has been set with PS mode when you want to use these two
connection ways. For more information, please kindly refer to page 32.
5. Please make sure you TV set has PS interface, otherwise, the TV screen will be divide into
two parts with these kind of connection and setting.
10
Connecting to an AV amplifier with
2 channel analog audio input
RED
WHITE
Connections
YELLOW
VIDEO IN
VIDEO
AMPLIFIER
VOLUME
POWER
PRO LOGIC
CHANNEL
TEST
MODE
3 STEREO
BYPASS
EXCITE
MIC
211
2
MIC VOL
MUTE
KARAOKE
DVD IN
L (white)
R (red)
INPUT SELECTOR
DOWN
BASS
UP
ECHO
MIC
TREBLE
Notes:
1. Set player's Downmix mode mode to "LT/RT" or "Stereo" or "V SURR" in the Speaker Setup Page (see page 17).
2. Set the television's AV input to the channel you have connected.
3. Set the amplifier's audio input to the channel you have connected.
11
Connecting to an AV amplifier with
5.1 channel analog audio input
Connections
5.1 CH IN
C SUB-W SL SR FL FR
POWER
PROLOGIC
BYPASS
MIC
MICVOL
211
2
VIDEO IN
CHANNEL
TEST
MODE
3STEREO
EXCITE
VIDEO
VOLUME
INPUTSELECTOR
MUTE
KARAOKE
DOWN
BASS
UP
ECHO
MIC
TREBLE
Notes:
1. Set player's Downmix mode to "off" in the Speaker Setup Page (see page 17).
2. Set the television's AV input to the channel you have connected.
3. Set the amplifier's audio input to the channel you have connected.
12
Connecting to an AV amplifier
with digital audio input
Two optional modes of connecting
Coaxial cord
Fiber
YELLOW
Connections
VIDEO IN
VIDEO
Optical Coaxial
VOLUME
POWER
PROLOGIC
TEST
MODE
3STEREO
BYPASS
MIC
MICVOL
EXCITE
211
2
INPUTSELECTOR
MUTE
KARAOKE
CHANNEL
DOWN
UP
BASS
ECHO
MIC
TREBLE
Notes:
1. Set player's SPDIF mode to "SPDIF/RAW" or "SPDIF/PCM" in the SPDIC Setup page (see page 19).
2. Set either the Optical or the Coaxial digital audio output.
3. Set the amplifier to the AV input connected to the DVD player.
13
Basic Operation
Preparation before playing:
1. Connect your DVD player to the TV and amplifier.
2. Turn on the television, and select the AV input channel you have connected.
3. Turn down the amplifier volume and turn on the power of amplifier, then select
the audio input to the channel you have connected.
Basic Playback
Step 1 - Press the POWER
switch, the player will start.
"LOAD" is illuminated, on the
display and the logo is
displayed on TV screen.
Step 2 - Press OPEN/CLOSE
button either on front panel or
remote control. The player displays
"OPEN" on the display. When the tray
is open, please put the disc on the tray,
with the label side up. Press
OPEN/CLOSE again to Close the disc
tray.
Step 3 - Press the PLAY button
on the front panel or remote
control. The player will
automatically read and
identify the disc, display the
type and total time, and begin
play.
14
Loading...
+ 32 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.