Page 1
DVD PLAYER
Getting started Basic operation
PBC functions &
MP3/JPEG
operations
DVD / SVCD / MP3 / VCD / CD / CD-R & CD-RW PLAYER WITH KARAOKE
DVD9100
ON
OFF
POWER
DVD / SVCD / VCD / MP3 / CD / CD-R & CD-RW PLAYER WITH KARAOKE
Operating Manual
DVD 9100
Super VSuper V
4
Before attempting to connect, operate or adjust this product, please read
these instructions completely and keep this manual for future reference.
Super VSuper VCCCCDDDD
PLAY
EJECT
VIDEO CD
Playback
mode
L
E
V
E
L
C
I
M
PAUSE
PREV
STOP
NEXT
MIC
operation
Karaoke
Digest &
program
settings
Initial
TermsTroubleshooting
Page 2
Getting started
Dear customers:
May we take this opportunity to thank you for purchasing this DVD player. We strongly recommend that you carefully study the
operating instructions before operating the unit.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992-1997 Dolby
Laboratories, Inc. All rights reserved.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
Main Features
Fully compatible with DVD, SVCD, CVD, MP3, DVCD, VCD1.0/1.1/2.0,
CD-DA, CD-R, CD-RW, KODAK PICTURE CD and CD-I DISC.
DTS-compatible digital audio output.
Compatible with full DVD playback functions: multi-angle, multi-language,
multi-story, parental control, etc.
Advanced 10-bit/27MHz video D/A converter with over 500 lines of
horizontal resolution.
Video output: Normal video output, S-video output.
Audio output: Dolby Digital 5.1ch output, Dolby Digital 2ch mixed stereo
output, MPEG-II Audio output, optical and coaxial digital output, Linear
PCM decoding output.
24-bit/96kHz audio D/A converter.
3-step zoom/smooth scan.
NTSC/PAL TV system compatible.
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other intellectual
Property rights owned by Macrovision corporation and other rights
owners. Use of this copyright protection technology must be authorised
by Macrovision, and is intended for home and other limited viewing uses.
Only unless authorised by Macrovision
Reverse engineering or disassembly is prohibited.
Features of audio specifications
DTS (Digital Theater System) digital audio output.
Dolby Digital 5.1ch decoding output.
MPEG-II Audio output.
Dolby Digital 2ch mixed-stereo decoding output.
Linear PCM audio decoding output.
MP3 audio decoding output.
Karaoke features
Digital multi-level key control.
Mixed sound effect: single sound channel, stereo output.
MIC inputs.
Playback features
Features of playback specifications
This product complies the MPEG II standardization law.
720 X 480 @ 30Hz
720 X 576 @ 25Hz
PAL and NTSC
Before using the player, please ensure that the local AC voltage is suitable for this unit.
Skipping ahead and skipping back.
Multi-speed slow motion playback.
3-step zooming playback.
3-way repeat playback.
Numeric selection.
Programmable playback.
Time search.
1
Page 3
Getting started
Getting started Basic operation
Disc types
Disc size 12cm
Audio & Video
Audio & Video
Audio
Single side, single layer/single side,
double layer
PAL and NTSC DVD disc
Playback time 135min/240min max.
Disc size 12cm/8cm
SVCD, CVD and VCD disc
Playback time 74min/20min max
Disc size12cm/8cm
CD disc
Playback time 74min/20min max
Disc maintenance
-Before playback, wipe the disc from the center hole toward the outer
edge with a clean cloth.
Table of contents
Getting Started
Features
Disc types & maintenance
Safety precautions
Accessories and remote control unit
System connection
Front panel
Basic operation
Starting playback and function buttons
Searching buttons and other buttons
PBC & Mp3 /JPEG functions
Playback mode
Karaoke operation
P1-P6
P7-P8
P1
P2
P3
P4
P5
P6
P7
P8
P9
P11
P12
PBC functions &
MP3/JPEG
operations
Playback
mode
operation
Karaoke
Digest &
program
settings
Initial
WrongRight
-Never use benzine, thinner, cleaning fluid, static electricity prevention
liquids or any other solvent.
Dirty disc may cause bad picture.
Digest and program
Initial settings
Troubleshooting tips
Definition of terms
P13
P14
P17
TermsTroubleshooting
P18
2
Page 4
Getting started
Safety precaution
WARNING WARNING WARNING
To avoid electrical shock, do not
open the cabinet, refer servicing
to qualified personnel only.
ATTENTION ATTENTIONATTENTION
Touching the unit is dangerous,
If thunder.
ATTENTION
If smoke, an odour or noises are
emitted from the unit, turn off the
power and disconnect the AC
power cord.
When left unused for a long period
of time, the unit should be unplugged
from the household AC outlet.
Keep the unit away from flower
vases, tubs, sinks, etc.. If liquids
are spilled into the unit, serious
damage could occur.
WARNING
Do not block ventilation holes of
the unit so that air can circulate
freely.
Do not expose this equipment
to rain or moisture.
Be sure to turn the unit off and disconnect the AC power cord before
cleaning the unit surface.
If the surface is dirty, wipe clean with
a cloth which has been dipped in a
weak soap-and -water solution and
wrung out thoroughly, and then wipe
again with a dry cloth.
Notes:
This unit is a class 1 laser product and uses a visible laser beam which could cause hazardous radiation exposure if directed. Be
sure to operate it correctly as instructed.
The above items are true of not only this unit but also most of the household electronic products.
3
Page 5
Getting started
Accessories
Audio cord
Remote
control unit
Batteries
(size AA, R6, UM-3)
Video cord
Battery installation (remote control unit)
1. Remove the battery cover.
2.
Insert two batteries (AA, R6, UM-3 type)
making sure the polarity(+/-) matches the marks
inside the unit.
3. Replace the cover.
Remote control unit
SKIP
OSD
P.7
P.12
P.12
P.11
P.13
P.11
P.11
P.11
P.13
P.8
P.7
P.11
P.14
P.12
P.11
P.8
P.14
OPEN/CLOSE
SYSTEM
MUTE
REPEAT
PROGRAM
AUDIO
SUBTITLE
ANGLE
DIGEST
PLAY
TITLE
SELECT
ZOOM
SLOW
SETUP
P.7
P.8
P.12
P.11
P.12
P.7
P.13
P.8
P.7
P.7
P.9
P.7
P.11
P.8
POWER
GO TO
L/R
REP A-B
RANDOM
Numeric
buttons
CLEAR
SCAN
PAUSE
STOP
PBC
Direction
buttons
RETURN
RESUME
STEP
--Do not attempt to recharge, short-circuit, disassemble, heat or throw
the batteries into the fire.
--Do not mix old and new batteries.
Weak batteries can leak and severely damage the remote control unit.
FUNCTION
P.12
P.12
Point remote control unit no more than 8m from the remote
sensor and within about 60 of the front of the unit.
+ & -
4
Page 6
Getting started
System connection
OPTICAL COAXIAL
REAR LEFT
CENTRE
FRONT LEFT
LEFT
White
Yellow
AC IN~
VIDEO
Audio cord
Audio cord
(optional)
To audio input connector
(FRONT L . R)
To audio input connector
(REAR L . R)
Audio cord
(optional)
(optional)
Amplifier with 5.1ch input connector
(sold separately)
AC outlet on the wall
To audio input connector
(SUBWOOFER)
To audio input connector
(CENTRE)
DIGITAL AUDIO OUT
PCM / (BIT STREAM)
Optical digital cable
(optional)
To coaxial digital audio
input connector
To optical digital audio input connector
SUBWOOFER
REAR RIGHT
5.1 CH SURROUND AUDIO OUT
Coaxial audio cable
(optional)
Yellow
Red White
FRONT RIGHT
Audio cord
RIGHT
2CH AUDIO OUT
Red
S-VIDEO
Video cord
S-video cord
(optional)
To stereo TV or other
audio equipments
Turn off the power and keep AC cord pulled out from the outlet when connecting the system.
5
Page 7
Getting started
Front panel
DVD9100
ON
OFF
POWER
DVD / SVCD / VCD / MP3 / CD / CD-R & CD-RW PLAYER WITH KARAOKE
L
E
V
E
L
C
I
Y
A
L
P
CT
JE
E
E
US
A
P
V
E
R
P
N
M
OP
T
S
XT
E
C
I
M
DISC TRAY
REMOTE SENSOR
POWER BUTTON
Vacuum fluorescent Display
PLAY MODE INDICATOR
DISC TYPE INDICATOR
PLAY/PAUSE INDICATOR
SVCD
MP3
REPEAT INDICATOR
PBC
ALL
ON/STANDBY LED
INDICATOR
PBC INDICATOR
TITLE/TRACK NUMBER
EJECT BUTTON
PLAY BUTTON
PREV BUTTON
PAUSE BUTTON
MIC LEVEL
CONTROL
MIC JACK
STOP BUTTON
NEXT BUTTON
PLAYBACK TIME
Most of the functions can be controlled by remote control unit.
6
Page 8
Basic operation
Starting playback
DVD9100
ON
OFF
1
2
POWER
3
PLAY
EJECT
Press POWER button to turn on power.
1
Press OPEN/CLOSE button to load disc on
2
MIC LEVEL
STOP
PAUSE
PREV
NEXT
MIC
disc tray.
Hold the disc without touching either of its surfaces, position it with the printed title side facing
up, align it with the guides, and place it in its pr-
oper position.
In case of interactive DVDs or VCDs with playback control, a menu appears on the TV screen.
Press POWER button once, the unit is on
3
standby mode. Press it again, then it is on.
Function buttons
1
DVD9100
ON
OFF
POWER
2
3
1
2
3
EL
V
E
L
C
I
M
E
Y
S
OP
A
U
L
T
A
P
S
P
T
C
EJE
T
PREV
NEX
C
I
M
PLAY and PAUSE button: Press PLAY
button to start playback. Press PAUSE
button to pause playback.
Numeric buttons (0-9):
You can select desired titles (DVD) or tracks (VCD 2.0) by pressing these buttons directly only if
the title or track number is less than 10.
If the title or track number is over 10. For instance,
if "28" is wanted, press "10+" twice, and then press
the 2-digit number "8".
STOP button: When this button is pressed once, the unit records the stopped
point, from where playback will resume
(resume function) if PLAY is pressed
afterwards. But if STOP button is pressed
again instead of PLAY button, there will
be no resume function.
DVD discs possess super interactive function. Please normally use " " and "select" keys in operation of OSD menu.
7
Page 9
Basic operation
Searching function buttons
DVD9100
ON
OFF
POWER
1
2
3
4
1
SKIP button:
Press these buttons to go to the previous/
next chapter (DVD) or track (SVCD/VCD).
SLOW button:
2
3
4
Press this button to select slow-motion
playback in forward and reverse direction
at 1/2, 1/4, 1/8 ,1/16 normal speed without
sound (DVD). When play SVCD/VCD
discs, press the button to select slowmotion playback in forward direction at
4-level speeds as 1/2, 1/4, 1/8 ,1/16.
Press PLAY button to return to normal playback.
STEP button: You can enjoy picture
frame by frame by pressing this button.
SCAN button: These buttons allow
skipping ahead/back at 4-level speeds .
Press PLAY button to return to normal playback.
Other buttons
PLAY
EJECT
MIC LEVEL
STOP
PAUSE
PREV
NEXT
MIC
1
2
1
2
DISC GOTO
Numeric buttons (0-9):
These buttons can function with GO TO
button or others (see page 7).
GO TO button:
Press this button to go to desired position. The player provides 3 search
mode.
TITLE XX/XX CHAPTER [ ]/XXX
[DVD only] [DVD only]
TRACK GOTO
[CD/VCD/SVCD]
When the above items are showed on TV screen,
you can input numbers to locate desired sector,
then press PLAY to commence play.
The number you input is invalid if it is beyond
the track's capacity.
This function maybe can't work with some SVCD
discs.
TITLE XX/XX TIME
SELECT TRACK
XX
When " " appears while a button is being operated, it means that the corresponding is prohibited by the player or disc.
/
8
Page 10
PBC functions & MP3 /JPEG operations
PBC playback buttons
When playing SVCD, VCD with PBC functions, you can enjoy
simple interactive software on TV screen.
When playback, there are such functions as track selection, stop,
previous/next scene, fast forward/backward, return, play/pause
and karaoke for you to select.
PBC functions can be auto run after the disc is loaded and its logo
appears on VFD.
1
DVD9100
ON
OFF
POWER
PBC button (SVCD/VCD only)
1
This button switches PBC function on or
off.
Desired tracks can be selected by pressing
numeric buttons when PBC functions are off.
You can quickly find any desired ahead/back
point by pressing PREV/NEXT buttons only
if PBC main menu appears on TV screen.
PLAY
EJECT
MIC LEVEL
STOP
PAUSE
PREV
NEXT
MP3 operations
MP3 is a kind of audio compacted format adopted the third audio compacted layer mode in the international standard MPEG. Utilising MP3 format, the
compress rate can reach 12 to 1 high. Therefore, only one MP3 compact disc
can hold music over six hundred minutes or more than one hundred and fifty
songs. Moreover, it's audio quality almost reaches the CD standard.
Press the OPEN/CLOSE button: Put in MP3 disc on label side, now
1
system begins searching information on disc. Completing searching,
MIC
the menu screen appears, now you can use " " and PLAY buttons
to select song to play, or you can select desired song to play by pressing
numeric buttons directly.
Prev & Next buttons: Their functions is to choose the previous or
2
next song to be displayed.
Numeric buttons: Pressing number buttons on your remote controller,
3
you can directly select the song which you want to enjoy to be played.
For example, if you want to enjoy listing to the eighteenth song,
please press "1" once , and then press "8".
If PBC functions are on, pressing RETURN button
will back to PBC main menu.
PBC functions allow you to select programs guided by simple interactive software.
STOP button: Press the button will stop playback .
4
9
Page 11
PBC functions & MP3 /JPEG operations
JPEG operations JPEG operations
Press OPEN/CLOSE:
Put KODAK JPEG disc properly, the system will search automatically.
After searching, the direction arrows and PLAY button can be used to
choose the option desired by the user. Also the numeric buttons can be
used to select directly. Press NEXT/PREV/STOP buttons to control.
Optional Play Modes:
FOLDER - Play the catalog.
SINGLE - Play the selected song or JPEG picture once and
stop.
REP-ONE - Play the same song or JPEG picture over and over.
FOLDER R - Repeat Play the catalog.
SHUFFLE - Randomly play each song or JPEG picture in the
current directory.
Sixteen slideshow transition modes are provided, use "RESUME" button
to select:
mode 1: wipe top
mode 2: wipe bottom
mode 3: wipe left
mode 4: wipe right
mode 5: diagonal wipe left top
mode 6: diagonal wipe right top
mode 7: diagonal wipe left bottom
mode 8: diagonal wipe right bottom
mode 9: extend from centre h
mode 10: extend from centre v
mode 11: compress to centre h
mode 12: compress to centre v
mode 13: window h
mode 14: window v
mode 15: wipe from edge to centre
mode 16: random
mode 17: no
Image transformation
There are four modes of transformation: "Invert", "Mirror", "Left" and
"Right". The arrow keys are used to select.
Up - Invert/Normal
Down - Mirror/Normal
Left - Turn left
Right - Turn right
Zoom
Press ZOOM button to enter ZOOM mode. Then press "FR and FF"
button zoom in/out.
Note: during ZOOM function, slide show transition and image transformation are disabled.
Stop
The "Stop" key is used to enable KODAK JPEG digest mode when in stop
state. After it is enabled, up to 12 scaled down jpeg pictures will be
displayed on the screen. The "Prev & Next" keys can be used to
display the next/prev twelve pictures. By pressing a number key the
corresponding picture will be enlarged to fill screen, and the digest
mode will be can-celled.
10
Page 12
Playback mode
Repeat playback mode buttons Interactive function buttons
The repeat functions that you can enjoy are dependent on the disc types
played.
DVD: title repeat, chapter repeat and given portion repeat.
SVCD/VCD/CD: all tracks repeat, single track repeat and given portion.
REPEAT button: To press this button:
You can repeatedly play a title (DVD) or all tracks
(SVCD/VCD/CD) when " ALL " appears on VFD.
You can repeatedly play a chapter (DVD) or a single
Track (SVCD/VCD/CD) when " " appears on VFD.
You can cancel repeat functions when no" "
appears on VFD.
When PBC is off, Repeat play can works with SVCD
/VCD/CD.
REP A-B button:
You can repeatedly play a given portion by operating
as following:
To press this button once to define the portion head
To press this button again to define the portion toe.
And then the portion will be played repeatedly.
To press this button again to return to normal playback.
ZOOM button:
Press this button during normal, zoom in or zoom out
playback mode. This player can magnify a picture at
3 levels. Press this button to magnify picture and use
direction buttons" " to select desired part of the
zoomed picture.
AUDIO button: To press this button, you can
change the audio language from the one selected
1
at the initial settings to a different language, if
available.
1
SUBTITLE button: To press this button, you can
2
3
4
5
change the subtitle language from the one selected at the initial settings to a different language,
if available.
ANGLE button:
Some DVDs may contain scenes which have
been shot simultaneously from a number of
different angles. For these discs, the same scene
can be viewed from each of these different angles
by using the ANGLE button.
RESUME button: When you press STOP button,
the player can memorise the stopped point from
which play will go on when you press RESUME
button.
TITLE button:
DVD disc:
Press TITLE button, then the DVD menu or titles available
on the disc will be displayed. Then you can use " " and
SELECT button to select programs.
The buttons mentioned in 1-3 can work only when the disc played supports
the corresponding functions.
2
3
4
5
When this unit is not used, please turn off the power and leave no disc inside.
11
Page 13
Karaoke operation
Karaoke function buttons Display and MIC echo adjustment
Before using karaoke, please turn on karaoke function in the setup
menu.
1
2
3
4
SYSTEM button:
Press this button to select PAL, NTSC or MULTI.
RANDOM button:
Random mode allows you to play
tracks randomly by pressing this button,
pressing again will cancel random playback.
FUNCTION button:
Press to select volume, pitch. Then press
"+" or "-" button for adjustment.
MUTE button:
Press this button to turn on/off the sound.
4
6
1
5
2
OSD button:
6
Press this button once to show main playback
information on TV screen and press it again to
show playback time. Press this button at the fifth
time, and then the display will be cancelled.
MIC volume adjustment
You can adjust MIC volume by tuning MIC LEVEL
knob on the front panel.
L/R button:
5
Press this button consecutively and the
audio output will change as following:
MONO-LEFT MONO-RIGHT STEREO
When playing karaoke, strong signal input will cause whistling. Please adjust MIC level knob while meeting with this case.
3
12
Page 14
Digest and program
Digest function buttons
DIGEST button:
If playing DVD discs, press this button back to
root menu screen
If playing DVDs you can use the functions of DIGEST,
PROGRAM and RANDOM.
Press PROGRAM button. Then
1
"PROGRAM" will appear on TV
screen
Press the track number in the order you
2
want.
For example, if the track numbers you
want to play are 1, 3 and 8, just input in
the order of 1-3-8.
You can press CLEAR button to cancel and input again if you
3
mis-input track numbers.
Now you can press " " and "SELECT" button to select "START"
4
option and enjoy the desired tracks.
Program functions
When you want to play only partial tracks/chapters of a disc
(DVDs) or to arrange the tracks/chapters playback order, you need
program functions.
Do as following:
13
Page 15
Initial settings
Common procedures of initial settings
Press SETUP button to get to the setup menu. Use direction buttons
" " to select the preferred item and press SELECT button to
confirm. After finishing settings, Press SETUP again to leave the
setup menu main page to the TV display.
SETUP MENU-MAIN PAGE
Setup menu main page
The following menu items can changed:
GENERAL SETUP: selects the GENERAL PAGE menu.
AUDIO SETUP: selects the AUDIO SETUP PAGE menu.
PREFERENCES: selects the PREFERENCES PAGE menu.
EXIT SETUP: selects the item to leave the setup menu.
General setup page
GENERAL SETUP PAGE
TV DISPLAY
ANGLE MARK
CLOSE CAPTI
SCREEN SAVER
MAIN PAGE
ON
OFF
The following menu items can be changed:
TV DISPLAY: selects the aspect ratio of the playback picture.
4:3/NORMAL/PS: pan & scan display.
4:3/NORMAL/LB: letterbox display.
ON
OFF
GENERAL SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
ON
OFF
4 : 3/PS
4 : 3/LB
16 : 9/WIDE
16:9/WIDE: widescreen display.
ANGLE MARK: viewing angles change option (if available).
See changing the angles on page 11.
CLOSE CAPTI: Select caption ON or OFF.
SCR SAVER: this is to turn on/off screen saver.
MAIN PAGE: selects the menu setup MAIN PAGE.
Audio setup page
AUDIO SETUP PAGE
SPEAKER SETUP
SPDIF SETUP
KARAOKE SETUP
MAIN PAGE
DOWN MIX
CENTER SPEAKER
REAR SPEAKER
SUBWOOFER
AUDIO SETUP
SPEAKER SETUP PAGE
LT/RT
STEREO
OFF
ON
OFF
ON
OFF
ON
OFF
This page is for setup speaker output.
SPDIF OUTPUT
AUDIO SETUP
MIC
AUDIO SETUP
SPDIF SETUP PAGE
KARAOKE SETUP PAGE
SPDIF OFF
SPDIF RAW
SPDIF PCM
ON
OFF
DOWN MIX
LT/RT: 2ch output, main channel
with surround.
STEREO: 2ch output, main
right channel with right
surround; main left
channel with left surround.
OFF: full 5.1ch output
CENTER SPEAKER
ON/OFF: set centre speaker
on/off.
REAR SPEAKER
ON/OFF: set rear speaker
on/off.
SUBWOOFER
ON/OFF: set subwoofer
speaker on/off.
Once the initial settings have been completed, the player can always be operated under the same conditions (especially with DVD discs).
The settings will be retained in the memory even after turning the power off until the settings are changed.
14
Page 16
Initial settings
Preferences setup page
PREFERENCES PAGE
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULT
MAIN PAGE
CHANGE
RESET
1 KID SAF
2 G
3 PG
4 PG 13
5 PGR
6 R
7 NC-17
8 ADULT
OFF
ENGLISH
FRENCH
GERMAN
SPANISH
PORTUGUESE
ITALY
DUTCH
DANISH
ENGLISH
FRENCH
GERMAN
SPANISH
PORTUGUESE
ITALY
DUTCH
DANISH
OFF
ENGLISH
FRENCH
GERMAN
SPANISH
PORTUGUESE
ITALY
DUTCH
DANISH
PAL
MULTI
NTSC
The following menu items can be changed:
TV TYPE: selects the type of television.
MULTI: automatic-self-selecting television sets.
NTSC
PAL
AUDIO: Selects a language for audio (if available).
SUBTITLE: Selects a language for subtitles (if available). no subtitles
are display after selecting OFF.
DISC MENU: Selects a language for title menus or DVD menus (if
available).
PARENTAL [DVD only]: This is to disable the playing of specified
DVDs which are unsuitable for children. Some DVDs are encoded
with specific rating level. If the rating level of the disc is higher than
that preset in the setup operation, playback of the disc will be prohibited. After selecting one of the PARENTAL items the screen will
change to the PASSWORD VERIFY page.
PASSWORD [DVD only]: Selects the menu setup PASSWORD CHANGE
PAGE.
DEFAULT: Reset all settings according to factory default settings.
MAIN PAGE: Selects the menu setup MAIN PAGE.
Once the initial settings have been completed, the player can always be operated under the same conditions(especially with DVD discs).
The settings will be retained in the memory even after turning the power off until the settings are changed.
15
Page 17
Initial settings and specifications
Password verify page
PASSWORD VERIFY PAGE
CURRENT PASSWORD
[ XXXX ]
CURRENT PASSWORD: Enter the current password. If the
password is incorrect, the parental option will not be changed.
Password change page
PASSWORD CHANGE PAGE
OLD PASSWORD [ XXXX ]
NEW PASSWORD [ YYYY ]
CONFIRM PASSWORD [ YYYY ]
Electronical parameters
Item
Power source
Power consumption
Laser
Signal system
Digital audio output
Input
Output
Audio
MIC
S-video
Video
Output level: 2Vrm (1KHz, 0 dB); connector: pin jack. 5.1ch mixed out-
Audio
put: 1 system (2 channels). 5.1ch discrete output: 1 system (5.1ch)
Frequency
response
S/N ratio
Dynamic range
Total harmonic
characteristics
distortion
AC 85-245V~, 50Hz/60Hz
<35W
Wave length: 655nm: Laser power: class 1
Optical digital output: optical connector;
Coaxial digital output: pin jack;
6.3mm jack
Y output level: 1Vp-p(75 ); C output level: 0.300Vp-p(75
)(PAL), 0.286Vp-p(75 ) (NTSC); connector: S-terminal
Output level: 1 Vp-p(75 ); connector: pin jack (1 systems)
20Hz~20kHz
Standard requirement
PAL/NTSC
90dB
80dB(1kHz)
-65dB(1kHz)
OLD PASSWORD: Enter the OLD password. (Factory setting is
1369)
NEW PASSWORD: Enter the NEW password. Enter 4 digits from
the remote control unit numeric buttons.
CONFIRM PASSWORD: Confirm the NEW password by entering
it again. If the confirmation is incorrect, the Password Change
Page will be displayed again.
Specifications and design are subject to change without prior notice.
Other specifications
Accessories
Dimensions
Carton size
Weight
Remote control distance
Handset x 1, Video cord x 1
Battery x 2 (AA, R6, UM-3 type), Audio cord x 1
430 (W) X 255 (D) X 50 (H) mm
485 (W) X 108 (D) X 345 (H) mm
N.W.: 2.8 kg G.W.: 3.4 kg
8.0m
16
Page 18
Troubleshooting tips
Troubleshooting tips [Common]
Before calling for service, you can check the following items on
symptoms and solutions:
No sound or distorted sound:
Ensure that the equipment is connected properly.
Ensure that the input settings for the TV and stereo system are correct.
Adjust the master volume using the GUI screen for player information.
No picture:
Ensure that the equipment is connected properly.
Ensure that the input setting for the TV is "video".
No play:
Condensation has formed: wait about 1 to 2 hours to allow the
player to dry out.
This player can't play discs other than DVDs, SVCDs, MP3s, VCDs
and CDs.
The disc may be dirty and require cleaning .
Ensure that the disc is installed with the label side up.
No remote control:
Check the batteries are installed with the correct polarities (+&-).
The batteries are depleted: replace them with new ones.
Point the remote control unit at the remote control sensor and
operate.
Remove the obstacles between the remote control unit and the
remote control sensor.
Operate the remote control unit at a distance of not more than 8
meters from the remote control sensor.
Troubleshooting tips [DVD]
Play does not commence even when title is selected:
Confirm the "Rating" settings.
Audio soundtrack and/or subtitle language is not the one selected
at the initial settings:
If the audio soundtrack and/or subtitle language does not exist on
the disc, the language selected at the initial setting will not be seen/
heard.
No subtitles:
Subtitles appear only with discs which contain them.
Alternative audio soundtrack (or subtitle) language fail to be
selected:
An alternative language is not selected with discs which do not contain
more than one language.
In the case of some discs, the alternative language cannot be selected by
operating the AUDIO or SUBTITLE button. Try selecting it from the DVD
menu if one is available.
Angle cannot be changed:
This function is dependent on software availability. Even if a disc has a
number of angles recorded, these angles may be recorded for specific
scenes only.
No key operation (by the unit and/or the remote control) is effective:
Turn the unit off and then back to on. Alternatively, turn off the unit,
disconnect the AC power cord and the reconnect it. (The player may
not be operating properly due to lightning, static electricity or some
other external factor.)
No MIC sound:
Ensure that the connection is proper.
Adjust MIC volume knobs at high level.
Troubleshooting tips [SVCD/VCD]
No menu play:
This function works only for SVCDs/VCDs with playback control.
17
Page 19
Definition of terms
Definition of terms Definition of terms
Angle
Recorded onto some DVD discs are scenes which have been
simultaneously shot from a number of different angles (the same
scene is shot from the front, front the left side, from the right side,
etc.). With such discs, the ANGLE button can be used to view the
scene from different angles.
DVD
This refers to a high-density optical disc on which high-quality pictures
and sound have been recorded by means of digital signals. Incorporating a new video compression technology (MPEG II) and high-density
recording technology, DVD enables aesthetically pleasing full-motion
video to be recorded over long periods of time (for instance, a whole
movie can be recorded).
DVD has a structure consisting of two 0.6mm thin discs which are
adhered to each other. Since the thinner the disc, the higher the
density at which the information can be recorded, a DVD disc has a
greater capacity than a single 1.2mm thick disc. Since the two thin
discs are adhered to each other, there is the potential to achieve
double-sided play sometime in the future for even longer duration
play.
Chapter number
These numbers are recorded on DVD discs. A title is subdivided into
many sections, each of which is numbered, and specific parts of video
presentations can be searched quickly using these numbers.
PBC (or Playback control)
This is recorded on a SVCD/VCD (2.0). The scenes or information to
be viewed (or listened to) can be selected interactively with the TV
monitor by looking at the menu shown on the TV monitor.
Track number
These numbers are assigned to the tracks which are recorded on
Video CDs. They enable specific tracks to be located quickly.
Time number
This indicates the play time which has elapsed from the start of a
disc or a title. It can be used to find a specific scene quickly. (It may
not work with some discs.)
Region management information
Subtitles
These are the printed lines appearing at the bottom of the screen
which translate or transcribe the dialogue. They are recorded on
DVD discs.
The Region number for this DVD/SUPER VCD/VCD/CD player is 4.
4
18
Page 20
P/N: 0700-D22500-18
Please fill the blanks with the model number and serial
number of this player for future reference
Model no.:
Serial No.:
Page 21
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Loading...