Palsonic 8040PFST User Manual

Download

Page 1

OWNER'S MANUAL

PURE FLAT HI-VISION STEREO TELEVISION

80CM CORDLESS REMOTE COLOUR TELEVISION

MODEL: 8040PFST

Type Tested

Electrical

Safety

AS/NZS 3250 Lic 4166

Standards Australia

APP No: N15900

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL: (02) 9313 7111

FAX: (02) 9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA: 1300 657 888

Page 2

Main features

PAL/NTSC/SECAM Multi-System Hyperband

Hyperband

English/Chinese on-screen menu display

Surround sound and wide - field dynamic sound system

NICAM Digital Stereo/bilingual broadcasts receivable

German Stereo (IGR)/bilingual broadcasts receivable

Three groups of S-VIDEO/VIDEO/AUDIO input terminals and one group of MONITOR output terminals

Auto/manual search

OFF timer and ON timer, Auto-Power-Off & blue background display

Advanced 6D picture improvement circuit

1. Digital Colour Transient Improver (CTI) Enhance the tint and make the original picture brighter and fresher.

2. 3H digital comb filter To attain the complete separation of brightness and colour signals. To reduce colour interface, blurry and dotted interruptions. To make the picture clearer.

3. Digital Luminance Transient Improver (LTI) Adopts the digital delay line and achieves the outline correction. To make the picture clearer and better definition.

4. Black level stretch circuit To extend the dynamic scope of the picture.

5. Scan Velocity Modulation & white peak suppressed circuit To enhance lines and borders-between bright and dark images. To improve the focus of the picture white peak and white characteristics, to make the picture and letters brighter and clearer.

6. Dynamic Focus To optimise the focus of electron beams in the CRT. To improve the picture sharpness especially in the comers of the screen and achieve the perfectness of picture finally.

Page 3

Congratulations on your purchase of this colour PURE FLAT Hi-Vision Palsonic television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference.

Contents

Main features ................................................................................................

Notes for operation ......................................................................................

Installation and appearance ........................................................................

Antenna connection .....................................................................................................................

Battery installation ........................................................................................................................

Appearance ....................................................................................................................................

The remote controller ...................................................................................................................

Operation ......................................................................................................

Switching on/off ...........................................................................................................................

Presetting channels ......................................................................................................................

Channel selection ........................................................................................................................

Sound mode selection .................................................................................................................

Picture and sound adjustment .....................................................................................................

Other functions ............................................................................................................................

External equipment connections ................................................................

Trouble shooting ..........................................................................................

Specifications ...............................................................................................

1 2 3 3 3 4 5 6 6

7 10 11 12 15 17 19 20

Page 4

NOTES FOR OPERATION

* Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike.

* Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted on the TV set.

Cautions For Safety

Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power supply of the other type.

When an unusual situation occurs, turn off the power switch at once and remove the plug from the wall outlet. Contact a qualified service department in your local area.

Do not expose the TV set to rain or excessive moisture, to prevent tire disaster or electric shock. Avoid using the set in very warm or damp places. Never use it in a bathroom.

There exists High Voltage in this TV set. Do not remove the cover to avoid danger.

When the TV set is to be left unattended, please turn off the power switch and remove the plug from the wall outlet.

In order to wipe dust off the picture tube or off the cabinet, you should remove the power plug from the wall outlet first. You can wipe lightly with a piece of dry, clean, soft cloth.

The TV set should be placed on an adequate place without exposing it to direct sunlight and other sources of heat to prevent the deformation of the cabinet or damage to components.

Do not cover the Ventilating holes in the cabinet. Keep a space of more than 5cm from the walls to the TV set, to guarantee the good ventilation.

When the power cord or the plug is damaged, please contact a qualified service department to get service.

Page 5

Installation and appearance

Antenna connection

To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial.

Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 30075 ohm adaptor (not supplied)

When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly.

Note:

When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the power switch on the TV while connecting the antenna lead. In thunder and lightning, weather, please disconnect the connection to the outdoor aerial to avoid thunder/lightning strike.

Battery Installation:

1) Remove the back battery cover.

2) Insert two size AAA batteries according to the polarity indication inside the remote controller.

Effective range of the remote control operation

1. When the remote controller is not used for an extended period of time or the batteries are worn out, please remove the batteries in time to avoid battery leakage.

2. Avoid moisture and mechanical shock to the remote controller.

Page 6

Appearance

Front view

POWER SWITCH

(3) Video 3 input terminals {S-VIDEO, VIDEO, AUDIO L/MONO, R}

VOLUME DOWN VOLUME UP CHANNEL DOWN CHANNEL UP MENU TV/AV SYSTEM SELECT

Note: Functions of MENU, TV/AV, SYSTEM, VOL , CH are also provided to the remote controller.

Back view

Antenna input

(1) Video 1 input terminals {S-VIDEO, VIDEO, AUDIO L/MONO, R}

MONITOR output terminals {VIDEO, AUDIO L/MONO, R}

(2) Video 2 input terminals {S-VIDEO, VIDEO, AUDIO L/MONO, R}

Page 7

The Remote Controller

Page 8

Operation

Switching on/off

Push the main power switch on, if the set is in Standby mode, the power indicator is red;

1. If there are pictures appearing on the screen, the indicator is yellow. If no picture appears on the screen, push the power button on the remote controller to

2. turn the set on, the indicator turns to yellow. Without using the remote controller, you can push any of the VOL , CH or VIDEO button to turn on the TV.

Note: If there are no input signals to the TV when the TV is on, a blue background will appear on the screen. After 15 minutes if there are still no signals to the TV, it will enter into standby mode automatically.

Push the main power switch to turn off the set.

3. If you want to turn off the TV temporarily, push the button on the remote controller to

4. switch the set to standby mode, the indicator turns to red.

Special indication:

Last-Mode-Memory: after turning off the power, the last TV mode picture and sound

setting mode and preset channels all are memorised. Therefore, the next time you turn on the TV, the TV will work in the previous setting mode.

If you directly pressed the main power switch on the TV to turn it off, you must press the main power switch to turn on the TV.

If you pressed the main power switch to turn off the TV when in standby mode, press the main power switch and then operate from the remote controller to turn the TV on.

Auto-Power-off function: there are two kinds of Auto-Power-Off function:

If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically turn off after about 15 minutes.

OFF - timer function. However, if the OFF - timer is operating, it takes precedence, that is, the function of Auto-Power-Off, if no signals received will be ineffective.

Page 9

Presetting the channels

There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu.

1. To enter into menu

1.1 Press the MENU button to enter into the main menu.

1.2 Press menu item select button or to select

SEARCH.

1.3 Press the or button to enter into the sub-menu of SEARCH.

Press the MENU button to display the main menu

Press the or button to select SEARCH

Note:

The MENU button refers to the MENU button on the remote controller or on the TV set, the or button refers to the or button on the remote controller or CH on the TV set, the or button refers to the or button on the remote controller or the VOL button on the TV set.

2. AUTO SEARCH

2.1

Press the menu item select button or to select AUTO SEARCH (the caption on the screen is red).

Press or button, the TV begins to search TV

2.2 channels automatically. All active channels will be preset and stored into the memoriser automatically. After presetting, the TV will return to the first channel program.

Press the or button to display the sub-menu of SEARCH

SEARCH MANUAL SEARCH AUTO SEARCH

Press the button to select AUTO SEARCH

AUTO SEARCH

Press the or button it begins searching automatically

12 VHFH

Before auto - search begins, you had better press

Note:

"SYS" button to set the current sound system to B/G and the colour system to "AUTO".

lllllllllllll

llllllllllllllllllllll

After presetting is finished it returns to the first channel

Page 10

3. MANUAL SEARCH

If AUTO-SEARCH cannot preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers - please make use of MANUAL SEARCH.

Press the menu item select button or to select

3.1 MANUAL SEARCH (the caption on the screen are red).

3.2

Press the or button to enter into the sub-menu of MANUAL SEARCH.

Press the or button to choose POSITION.

3.3 (the caption on the screen are red), press the or button to select the needed program number (from 00 ~ 99.

Note:

Push the or button to select a channel number within 0.7 of a second. Push and hold the or button for more than 0.7 of a second to select a decimal number.

Press the or button to select MANUAL SEARCH

SEARCH MANUAL SEARCH

AUTO SEARCH

Press the or button to display the menu of MANUAL SEARCH

MANUAL SEARCH

Press the or button to select SEARCH

MANUAL SEARCH POSITION 10

Press the or button to select SEARCH, push

3.4 the button to search channels from current channel to higher channel. Push the button to search channels from current channel to lower channel. When a channel is located, the searching stops, this channel is then memorised with a present channel number.

You can also make use of band selection to quicken

Note:

the searching process in your desired band. Pressing the or button moves the band to the next step in the sequence below.

VHFL

VHFH

UHF

Press the button it begins searching

POSITION 22 SEARCH

Press the button to select the wanted channel number

POSITION 22

Press the button select SEARCH

When a station is searched the searching stops

Page 11

When you want to store and memorise another channel

3.5 with another position, repeat steps 3.3, 3,4.

4. Skip unwanted program numbers

After presetting the channels, you can skip unwanted program numbers to select your desired channels.

4.1

Repeat steps 3.1 to 3.3 to select the unwanted program position of the unwanted channels .

4.2

Press the or button to select SKIP. Press the or button to select SKIP ON. After completion of the channel presetting, when you press the CH button to select channel, the unwanted channels will be skipped.

MANUAL SEARCH POSITION 14

Press the button to select SKIP

SKIP OFF

Press the or button to select SKIP ON

If you want to skip other unwanted channels, repeat step 4.1 above to change the channel numbers.

If you want to restore the skipped program numbers, do step 4.1 to select these program numbers, then press the or button to select SKIP OFF.

5. Manual Fine Tuning

When sound and picture's effect of a channel is poor (for example: one or two CATV channel's sound and picture are not standard), you can correct by the use of Manual Fine Tuning.

5.1

Repeat steps 3. 1 to 3.3 to select the channels you want to manually fine tune.

Push the or button to select MFT, then press

5.2 or button, the channel begins to search until the optimum picture and sound is achieved.

Note:

If some channel's colour or sound is abnormal, it may be that the setting of the colour or the sound system is wrong, please do the following step 6 to set the colour and sound system. After finishing the preset operation, press the MENU button repeatedly until the "on - screen" display disappears and exits from the main menu.

SKIP ON

MANUAL SEARCH POSITION 10

Press the button to select MFT

MFT

Press the button it begins fine tuning in direction.

MFT

llllllllllllll

Press the MENU button repeatedly until on-screen display menu disappears

- - - - -

Page 12

6. The setting of colour and sound system

Press the SYS button, the screen will display colour and

6.1

sound system.

Press the SYS button

SYSTEM

6.2

If the displaying colour is abnormal, press the or button to select COLOR, then press the or button to select the right colour system. Every time you press or button, the colour system will change in the sequence on the right.

AUTO PAL SECAM NTSC 4.43 NTSC 3.58

6.3

If the sound is abnormal, press the or button to select SOUND, then press the or button to select the right sound system. The sound system will change in the sequence on the right:

D/K

M B/G

Now you can watch the broadcasting TV program at the preset channel.

Channel selection

You can select your desired TV program by one of the following methods.

COLOR AUTO

Press the - / - - button

- -

1. Making use of the direct select buttons 0 ~ 9 and - /- -

To select a one - digit channel, press - /- - button to display " - " on the upper right corner of the screen, then directly press a number button of 0 ~ 9. To select a two-digit channel, press the - / - - button to display "- - " on the upper right corner of the screen, then press the number buttons. The channel range is 0 ~ 99.

2. Making use of the CH button

Press the CH button, the channel number will increase progressively. Press the CH button, the channel number will decrease progressively.

3. Making use of the button

Press the button, it can switch back quickly to the previous channel. For example, the channel you previously watched is 2, the present channel is 8, press the button, it will return to channel 2, press the button it will return to channel 8.

Press the 0 ~ 9 button

Press the button

Page 13

Sound mode selection

If the broadcasting TV station is transmitting high quality two-channel digital sound (NICAM) to be added to the already existing FM sound, or transmitting a second FM sound with an identification signal to be added to the already existing first FM sound (IGR), in the upper right corner of the screen will display an indication for several seconds which is listed in the following table. You can press the " " button repeatedly to select sound source.

Sound transmitting mode

Only one FM channel transmitting mono sound

two FM channels transmitting stereo sound

two FM channels transmitting dual language

NICAM MONO

one digital sound channel transmitting mono sound

NICAM STEREO

two digital sound channels transmitting stereo sound

NICAM DUAL

two digital sound channels transmitting dual sound

NICAM MONO

one digital sound channel

transmitting mono sound

NICAM STEREO

two digital sound channels transmitting stereo sound

NICAM DUAL

two digital sound channels transmitting dual sound

FM MONO

FM STEREO

FM DUAL

FM MONO

one FM sound channel (The sound signal in FM channel is same as the one in NICAM channel. So when the NICAM is transmitting, on the TV set automatically switches to high quality digital sound channel).

FM MONO

one FM sound channel (The sound signal in FM channel is different from the one in NICAM channel. So when the NICAM is transmitting on the TV screen only displays an indicator in yellow, while the active sound channel is FM).

On - screen display and sound source

"FM MONO" "FORCE FM"

FM mono sound

"STEREO" "FORCE FM"

"DUAL 1" "DUAL 2"

"NICAM MONO" "FORCE FM"

"STEREO" "FORCE FM"

"DUAL 1" "FORCE FM"

language 1 digital

"NICAM MONO"

(In yellow. Only for indication)

FM mono sound

"STEREO"

(In yellow. Only for indication)

FM mono sound

"DUAL"

(In yellow.

Only for indication)

language 3

"DUAL 1" "FM MONO"

"DUAL 2"

language 2 digital

"NICAM MONO" "FM MONO"

"STEREO" "FM MONO"

digital stereo sound

FM mono sound

first FM soundFM stereo sound

language 2language 1

FM mono sounddigital mono sound

FM mixed sounddigital stereo sound

language 1 FM

"DUAL 2"

language 2language 1

FM mono sounddigital mono sound

FM mono sound

language 3

If you experience loud noise in digital sound channel because of the weak signal, please press the " " button to set the sound mode to "FM MONO" or "FORCE FM", thus to select FM sound channel. In "FORCE FM" mode, the TV set no longer automatically searches "NICAM" or "IGR" signals.

Page 14

Picture and sound adjustment

Press the | button, you can quickly select two modes of picture and sound quality standard: One is standard mode ( on the screen displays ("STANDARD"); The other is personal select mode (on the screen displays "MEMORY").

STANDARD

Press the | button

1. Picture adjustment

Complete the following steps and you will adjust the picture quality. Press the MENU button, on the screen will dis-

1.1 play the main menu, press the or button to select PICTURE, then press or button to enter into the sub-menu of PICTURE. Press or the button to select the items you

1.2 want to adjust (the caption on the screen is red), then press the or button to adjust the level of picture control amount.

Adjustment

item

COLOUR paler

BRIGHT

CONT (Contrast)

SHARP weaker stronger

TINT

BBK

(Blue background)

Pressing (Memory mode)

darker lighter weaker stronger

purplish

ON (OFF)

deeper

bluish 0

Standard

Mode

50 70

70 20

Note:

* Only when the colour system is NTSC, there is TINT item.

* If the signal being received is weaker, adjust SHARP to lower level to reduce the noise. If the signal being is stronger, adjust SHARP to higher level to improve the picture quality.

MEMORY

Press the MENU button to display the main menu

MENU PICTURE

Press the or button to display the menu of PICTURE

PICTURE MEMORY COLOR 70 BRIGHT50

Press the or button to select adjustment item

PICTURE MEMORY COLOR 70 BRIGHT 50

Press the or button to adjust the level

PICTURE MEMORY COLOR 70 BRIGHT 60

lllllllll

lllllllll llllll

lllllllll llllllll

* If the TV signals are too weak and you can not watch the program normally, blue background will appear automatically to overcome the picture. If you insist on watching the program, you can select "BBK" item to shut off the blue background. We suggest you turn "BKK" on in ordinary circumstances.

Page 15

2. Sound adjustment

Complete the following steps and you will adjust the sound quality.

Press the MENU button to display the main

2.1 menu. Press the or button to select SOUND , then press the or button to enter into the sub-menu of SOUND.

2.2

Press the or button to select your required sound adjustment item (the caption on the screen is red), then press the or button to adjust the sound quality.

Adjustment

Pressing (Memory mode)

Standard

item

BASS

TREBLE

BALANCE

SURROUND SURROUND

weaker weaker

decrease right

side sound

on/off

weaker

stronger stronger

decrease left

side sound

on/off

stronger

mode

50 50

Off

Press the MENU button and button

MENU PICTURE SOUND

Press the or button to display the menu of sound

SOUND MEMORY BASS 50 TREBLE 50

Press the or button to select adjustment mode

SOUND MEMORY BASS 50 TREBLE 50

Press the or button to adjust the level

llllll llllll

You can select the sound quality according to the programme content and personal preference.

BASS

TREBLE

SURROUND

Tone quality

suitable for listening

Strong

to music

suitable for listening

weak

middle

weak

middle

off off

to news, language

standard

Note: During the process of picture and sound ad-

justment, every time you press the | button, STANDARD/MEMORY is displayed on the screen alternatively. When picture and tone quality are adjusted to your desired level, the mode is memory mode.

SOUND MEMORY BASS 50 TREBLE 70

Press the | button mode changes between STANDARD and MEMORY

SOUND STANDARD BASS 50 TREBLE 50

llllll llllllll

llllll llllll

Page 16

3. SURROUND SOUND

Making use of surround sound, you can enjoy the dynamic sound effect that is like being in a music hall. To make use of surround sound, complete steps 2.1, 2.2 to select SURROUND ON, and press the button to select SURROUND then press the or button to adjust its effect. To turn off surround sound, select

SURROUND OFF.

4. Adjusting the volume and muting the sound.

You can press the VOL button to adjust the volume, and you can press the button to mute the sound. Press the button again or VOL button or operate any item of SOUND menu, the sound is restored to normal.

SURROUND OFF

Press the or button to to select SURROUND ON

SURROUND ON

Press button to select SURROUND

SURROUND 50

Press the button to increase SURROUND

llllll

VOLUME 50

MUTE 50

SURROUND 70

llllll

Page 17

Other functions

1. ON Timer/OFF Timer

With the timer, you can set the TV to turn on/off automatically at a preset time. In the menu of TIMER you can set: CLOCK, ON TIME, OFF TIME.

1.1 OFF TIME

With the OFF timer, the TV will automatically switch to standby mode at a preset time.

1.1.1

Press the MENU button to enter into the main menu, press the or button to select TIMER, and press the or button to enter into the sub - menu of TIMER.

1.1.2

Press the or button to select OFF TIME. Pressing the or button set ONCE/EVERY OFF TIME. Every time you press the or button, it will change in the sequence of OFF EVERY ONCE OFF EVERY

------. When the setting is ONCE or EVERY OFF TIME, press the or button to select time to turn off the set, then press the or button to set the time to turn off the TV, at the preset time the TV will automatically switch to standby mode. To cancel OFF TIME, set OFF TIME OFF.

menu of TIMER

TIMER

OFF TIME OFF

0:00

TIMER

OFF TIME EVERY

10:00

1.2 ON TIME

With the ON timer, the TV will automatically turn on to preset channel at a preset time.

1.2.1 Do Step 1.1.1 to enter into the sub-menu of TIMER

1.2.2

Press the or button to select ON TIME. Pressing the or button set ONCE/EVERY ON TIME. Every time you press the or button, it will change in the sequence of OFF EVERY ONCE OFF EVERY

......... When the setting is ONCE or EVERY ON TIME,

press the or button to select time to turn on the set, then press the or button to set the time to turn on the TV. After the setting, press the or button to select POS., then press the or button to select your desired program number.

menu of TIMER

TIMER

ON TIME OFF

0:00

TIMER

ON TIME EVERY

6:00

Page 18

1.2.3.

Pressing the button set the TV into standby mode. At the preset time the TV will automatically turn on to preset channel. To cancel ON TIME, set ON TIME OFF.

1.3 CLOCK

The built-in clock employs the 24-hour system.

Do step 1.1.1 to enter into the sub-menu of

1.3.1 TIMER.

1.3.2

Press the or button to select CLOCK. Pressing the or button set the present hour and minute.

Note:

To make use of ON TIME and OFF TIME, set the clock firstly and check the correct time.

1.4 SLEEP

To make use of SLEEP function, press the SLP button every time, the letters displaying on the screen will change in the sequence of OFF

120 min 110min ......10min OFF..... At the

preset time, the TV will automatically switch to standby mode.

TIMER

CLOCK 10:30

SLEEP 30min

2. Selecting the menu language

You can select the menu language: ENGLISH or CHINESE( ).

2.1

Press the MENU button to enter into the main menu, press the or button to select LANGUAGE.

2.2

Press the or button to enter into the sub menu. Press the or button to select ENGLISH or

2.3

Press the MENU button repeatedly until the set exits from menu - display mode.

ENGLISH

Page 19

External Equipment Connections

The following describes how to use and connect the TV with other equipment. Refer to the owner's manual of the other equipment to be connected as well.

1. To Connect to AV input

You can video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound. If your video equipment has an S-VIDEO output terminal, connect it to the S-VIDEO input terminal (special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (phono type).

Page 20

To select the input press the AV button on the remote controller repeatedly until you see the corresponding input indication on the screen. To return to aerial input, press the AV button until it displays programme number, or press direct channel select button or the CH button.

VIDEO 1 VIDEO 2

VIDEO 3

If the colour of video input is abnormal, the colour system setting may be incorrect. Press the SYS button to display COLOR AUTO If not, press the or button until normal colour appears

Note on the S-VIDEO terminal

The S-VIDEO input terminal has priority over the AV1, AV2 VIDEO terminals on the rear and the AV3 VIDEO terminals on the left side. To use equipment connected to the video terminals, disconnect any plug from the S-VIDEO terminal

2. To connect MONITOR output terminals

You can connect a stereo system to the MONITOR output terminals (photo type) on the set to enjoy a high - quality sound from the stereo system. The MONITOR output terminals output the video and audio signals being displayed on the screen.

Page 21

Troubleshooting

Symptoms

No power, red indicator is not lit up

Poor colour, poor tint

Spots appear on the screen

Stripes appear on the screen

Double images or "ghosts"

Snowy picture

Check the following items

Be sure the power cord is plugged in

Contrast, colour, tint are not correctly adjusted

Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc.

Possible interferences of electronic interference from another TV set, a computer, electronics game machine, a broadcast station, etc.

This may be caused by reflections from nearby mountains or buildings.

Check the antenna direction.

It is possible that the aerial "lead - in" is damaged or comes off.

Check the antenna direction.

The remote controller does not work

TV cabinet creaks

The batteries may be worn out

The batteries may be installed with their polarity reversed.

Even if the picture or the sound is normal, changes in the room temperature sometimes make the TV cabinet expand or contract, making a noise. This does not indicate a malfunction.

Page 22

Specifications

Power supply: Power consumption: Dimension (mm): Weight: CRT:

TV system & channel range System PAL-D/K PAL-B/G PAL-I NTSC-M US SECAM-B/G SECAM-D/K

Colour system: Sound system :

AC 240V, 50Hz 200W 926 (W) x 678.5 (H) x 582 (D) 73 kg 80 cm

VHF 1-12 2-12 2-12 2-13 2-12 1-12

PAL/SECAM/4.43NTSC/3.58NTSC NICAM728: B/G 5.5/5.85

UHF 13-57 21-69 21-69 14-79 21-69 21-69

I 6.0/6.552 D/K 6.5/5.85

CATV Z1 ~ Z37 X ~ Z + 2, S1 ~ S41

A-6~A-l,A~W,AA~FFF X ~ Z + 2, S1~S4

IGR(2 - Carrier) : B/G 5.5/5.74

Sound output: Accessories: Note : Design and specifications are subject to change without notice.

13W + 13W one remote controller

Page 23

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL: (02) 9313 7111

FAX: (02) 9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA: 1300 657 888

604-Z34183-00