Palsonic 6810PF Owners Manual
OWNER'S MANUAL
PURE FLAT HI-VISION STEREO TELEVISION
68CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 6810PF
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4166
Standards Australia
APP No: N15899
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
Congratulations on your purchase of this colour PURE FLAT Hi-Vision Palsonic television receiver.
We recommend that you thoroughly read this manual before use to fully enjoy the
many functions and excellent effects of this receiver.
Retain is manual in an easily accessible location for future reference.
Contents
Main features .............................................................................................................
Notes for operation ....................................................................................................
Installation and appearance .....................................................................................
Antenna connection ....................................................................................
Battery installation .....................................................................................
Apperance ...............................................................................................
The remote controller ..................................................................................
Operation ...................................................................................................................
Switching on/off ..........................................................................................................................
Preseting channels .......................................................................................................................
Channel selection ........................................................................................................................
Sound mode selection .................................................................................................................
Picture and sound adjustment .....................................................................................................
Other functions ............................................................................................................................
External equipment connections ..............................................................................
Trouble shooting ........................................................................................................
Specifications .............................................................................................................
1
2
3
3
3
4
5
6
6
7
10
11
12
15
17
19
20
Main features
.
68cm Pure Flat picture tube
.
PAL/NTSC/SECAM Multi - System
.
Hyperband
.
CHINESE/ENGLISH on-screen menu display
.
Surround sound and wide-field dynamic sound system
.
NICAM Digital Stereo/bilingual broadcasts receivable
.
German Stereo (IGR) /bilingual broadcasts receivable
.
Three groups of S-VIDEO/VIDEO/AUDIO input terminals and one group of MONITOR
output terminals
.
Auto/manual search
.
OFF timer and ON timer, Auto-Power-Off & blue background display
.
Advanced 6D picture improvement circuit
1. Digital Color Transient Improver (CTI)
Enhance the tint and make the original picture brighter and fresher
2. 3H digital comb filter
To attain the complete separation of brightness and colour signals. To reduce colour
interface, blurry and dotted interruptions. To make the picture clearer.
3. Digital Luminance Transient Improver (LTI)
Adopts the digital delay line and achieves the outline correction. To make the picture
clearer and better definition.
4. Black level stretch circuit
To extend the dynamic scope of the picture.
5. Scan Velocity Modulation & white peak suppressed circuit
To enhance lines and borders-between bright and dark images. To improve the focus of the
picture white peak and white characteristics, to make the picture and letters brighter and
clearer.
6. Dynamic Focus
To optimize the focus of electron beams in the CRT. To improve the picture sharpness
especially in the comers of the screen and achieve the perfectness of picture finally.
1
NOTES FOR OPERATION
* Do not let the TV set be in standby condition for a long period of time. When it is not in use,
please turn off the power supply and remove the power plug. When it is to be left for a
prolonged period of time, it is recommended to disconnect the connection to the outdoor
aerial, to avoid thunder strike.
* Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted
on the TV set.
Cautions For Safety
Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power
supply of the other type.
When an unusual situation
occurs, turn off the power
switch at once and remove the
plug from the wall outlet.
Contact a qualified service
department in your local area.
Do not expose the TV set to
rain or excessive moisture, to
prevent tire disaster or
electric shock. Avoid using
the set in very warm or damp
places. Never use it in a
bathroom.
There exists High Voltage in
this TV set. Do not remove
the cover to avoid danger.
When the TV set is to be left
unattended, please turn off the
power switch and remove the
plug from the wall outlet.
In order to wipe dust off the
picture tube or off the cabinet,
you should remove the power
plug from the wall outlet first.
You can wipe lightly with a
piece of dry, clean, soft cloth.
The TV set should be placed
on an adequate place without
exposing it to direct sunlight
and other sources of heat to
prevent the deformation of the
cabinet or damage to
components.
Do not cover the Ventilating
holes in the cabinet. Keep a
space of more than 5 cm from
the walls to the TV set, to
guarantee the good ventilation.
When the power cord or the
plug is damaged, please
contact a qualified service
department to get service.
2
Installation and appearance
Antenna connection
To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATV
cable. If the signals are strong enough, you may use an indoor aerial.
Note: In case of using the
Twin-lead aerial feeder (300 )
for UHF/VHF aerial, use a 300-75
ohm adaptor (not supplied)
When using the coaxial cable (not
supplied) (75 ) for UHF/VHF
aerial, connect the plug into the
75 ohm aerial socket directly.
Note:
When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off
the power switch on the TV while connecting the antenna lead.
In thunder and lightning, weather, please disconnect the connection to the outdoor aerial to avoid
thunder/lightning strike.
Battery Installation:
1) Remove the back battery cover.
2) Insert two size AAA batteries according to
the polarity indication inside the remote
controller.
Effective range of the remote control
operation
Note:
1. When the remote controller is not used for
an extended period of time or the batteries
are worn out, please remove the batteries in
time to avoid battery leakage.
2. Avoid moisture and mechanical shock to the
remote controller.
3
Appearance
Front view
POWER SWITCH
(3) Video 3 input terminals
{S-VIDEO, VIDEO,
AUDIO L/MONO, R}
Note: Functions of MENU, AV, SYS, CH , VOL+/- are also provided
to the remote controller.
Back view
Antenna input
CHANNEL DOWN
CHANNEL UP
MENU
TV/AV
SYSTEM
MONITOR output terminals
{VIDEO, AUDIO L/MONO, R}
(1) Video 1 input terminals
{S-VIDEO, VIDEO, AUDIO L/MONO, R}
4
(2) Video 2 input terminals
{S-VIDEO, VIDEO, AUDIO L/MONO, R}
The Remote Controller
5
Loading...