Congratulations on your purchase of this Palsonic colour television receiver.
We recommend that you thoroughly read this manual before use to fully enjoy the many functions
and excellent effects of this receiver.
Retain this manual in an easily accessible location for future reference.
* Screen displays and illustrations in this manual may differ from the actual ones for better
visibility.
INTRODUCTION
Features ...................................................1
NOTES FOR OPERATION
Cautions for safety...................................2
Non-signal blue background display and AUTO-POWER-OFF function
.
Games, built-in 500 years' calender
.
Child Lock function, channel swap
.
Program scan function
.
Five picture modes' setting
.
AUDIO/VIDEO input & output terminals
.
Advanced digital picture improvement circuit
2
1
NOTES FOR OPERATION
Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please
*
turn off the power supply and remove the power plug. When it is to be left unattended for
a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to
avoid thunder strike.
Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted
*
on the TV set.
Cautions for safety
Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power
supply of the other type.
When an unusual situation
occurs, turn off the power
switch at once and remove the
plug from the wall outlet.
Contact a qualified service
department in your local area.
Do not expose the TV set to
rain or excessive moisture, to
prevent tire disaster or
electric shock. Avoid using
the set in very warm or damp
places. Never use it in a
bathroom.
There exists High Voltage in
this TV set. Do not remove
the cover to avoid danger.
When the TV set is to be left
unattended, please turn off the
power switch and remove the
plug from the wall outlet.
In order to wipe dust off the
picture tube or off the cabinet,
you should remove the power
plug from the wall outlet first.
You can wipe lightly with a
piece of dry, clean, soft cloth.
The TV set should be placed
on an adequate place without
exposing it to direct sunlight
and other sources of heat to
prevent the deformation of the
cabinet or damage to components.
Do not cover the Ventilating
holes in the cabinet. Keep a
space of more than 5cm from
the walls to the TV set, to
guarantee the good ventilation.
When the power cord or the
plug is damaged, please
contact a qualified service
department to get service.
2
Installation
Antenna Connection
To ensure a bright-colored and clear picture, you should use an outdoor aerial or CATV cable. If
the signals are strong enough, you may use an indoor aerial.
Note: In case of using the
Twin-lead aerial feeder (300 )
for UHF/VHF aerial, use a 300-75
ohm adaptor (not supplied)
When using the coaxial cable (not
supplied) (75 ) for UHF/VHF
aerial, connect the plug into the
75 ohm aerial socket directly.
Note:
When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the
power switch on the TV while connecting the antenna lead.
In thunder and lightning weather, please disconnect the outdoor aerial to avoid thunder/lightning
strike.
Battery installation
(1) Remove the back battery cover.
(2) Insert two size AAA batteries according to
the polarity indication inside the remote
controller.
Effective range of the remote
control operation
/
Notes:
1. When the remote controller is not used for
an extended period of time or the batteries
are worn out, please remove the batteries in
time to avoid battery leakage.
2. Avoid moisture and mechanical shock to
the remote controller.
3. Do not drop, dampen or disassemble the
remote controller.
3
Appearance
Front view
Note: Functions of , MENU, TV/AV, VOL , CH are also provided to the
remote controller.
Back View
4
Appearance
Remote Controller
5
OPERATION
Turning the Power On/Off & Menu Operation
.
The following describes how to turn the TV on/off using the TV's main switch and the remote
controller.
To turn the power on/off
1. Press the POWER switch, the red power indicator lights up.
2.
*Note: If there are no input signals to the TV when the TV set is on, a blue background will appear on
the screen. After 15 minutes if there are still no signals to the TV, it will enter into standby
mode automatically.
3. Press the POWER switch to turn off the set completely.
4.
Special indication:
Last-Mode-Memory: after turning off the power, the last TV mode, picture and sound setting mode and
preset channels all are memorized. Therefore, next time you turn on the TV, the TV will work in the
previous setting mode.
.
If you directly pressed the main power switch on the TV to turn it off, you must press the main
power switch to turn on the TV.
.
If you pressed the main power switch to turn off the TV when in standby mode, press the main
power switch and then operate from the remote controller to turn the TV on.
If no picture appears on the screen, press the button on the set or on the remote
controller to turn the set on and the yellow indicator light up.
If you want to turn off the TV temporarily, press the button on the remote controller to switch
the set to standby mode
Auto-Power-Off : there are two kinds of Auto-Power-Off function:
1. If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically turn
off after about 10 minutes.
2. SLEEP-timer function.
3. OFF timer function.
Menu Operation
Press MENU button to enter into cartoon graphics menu page, press MENU button or POS+/- button
repeatedly can select different graphics. The selected graphics is highlighted and the menu name will
appear above the graphics (each graphics represents a menu) . Press VOL+/- button to enter into the
sub-minu. To call, press RECALL button.
6
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.