Palsonic 5120S, 5120G, 5120B User Manual

Download

Page 1

OWNER'S MANUAL

ART SERIES

51CM CORDLESS REMOTE COLOUR TELEVISION

MODEL: 5120G

5120B 5120S

Type Tested

Electrical

Safety

AS/NZS 3250 Lic 4164

Standards Australia

APP No: N17340

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL:(02)9313 7111

FAX:(02)9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA:1300 657 888

Page 2

Congratulations on your purchase of this Palsonic colour television receiver.

We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility.

Contents

INTRODUCTION

Features ...................................................1

NOTES FOR OPERATION

Cautions for safety..................................2

OPERATION

INSTALLATION

Antenna connection.................................3

Battery installation..................................3

APPEARANCE

Front view................................................4

Back view.................................................4

Remote controller...................................5

Turning the Power On/Off....................6

Menu Operation.....................................6

Tuning in.................................................7

To preset channels (ASM).........................7

To preset channels (SEARCH)..................7

To skip unnecessary position numbers......9

MFT (Manual Fine Tuning)......................9

AFT (Automatic Frequency Tuning).......10

The setting of colour and sound system..10

Channel selection.........................................11

Convenient Picture and Sound Control....12

CLOCK setting...........................................13

SYSTEM setting.........................................14

Playing Games.............................................15

Sleep timer...................................................16

Other functions............................................17

CALENDAR function..............................17

CHILD LOCK setting...............................17

CHANNEL SWAP...................................18

Super receiving function...........................18

Progam Scan.............................................18

CONNECTING OTHER EQUIPMENT

External Equipment Connections...........19

Video playback........................................19

Recording TV program............................19

OTHERS

Troubleshooting...........................................20

Specifications................................................21

Page 3

INTRODUCTION

Features

Hyperband

English/Chinese on-screen menu display

256 preset channels

Intellectualized I C-bus control

Full function remote control

Sleep timer, ON Timer, OFF Timer

Non-signal blue background display and AUTO-POWER-OFF function

Games, built-in 500 year calendar function

Child Lock function, Channel swap

Program scan function

Five picture modes' setting

AUDIO/VIDEO input & output terminals

Advanced digital picture improvement circuit

Page 4

NOTES FOR OPERATION

Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please

turn off the power supply and remove the power plug. When it is to be left unattended for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike.

Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted

on the TV set.

Cautions for safety

Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power

supply of the other type.

When an unusual situation occurs, turn off the power switch at once and remove the plug from the wall outlet. Contact a qualified service department in your local area.

Do not expose the TV set to rain or excessive moisture, to prevent tire disaster or electric shock. Avoid using the set in very warm or damp places. Never use it in a bathroom.

There exists High Voltage in this TV set. Do not remove the cover to avoid danger.

When the TV set is to be left unattended, please turn off the power switch and remove the plug from the wall outlet.

In order to wipe dust off the picture tube or off the cabinet, you should remove the power plug from the wall outlet first. You can wipe lightly with a piece of dry, clean, soft cloth.

The TV set should be placed on an adequate place without exposing it to direct sunlight and other sources of heat to prevent the deformation of the cabinet or damage to components.

Do not cover the Ventilating holes in the cabinet. Keep a space of more than 5cm from the walls to the TV set, to guarantee the good ventilation.

When the power cord or the plug is damaged, please contact a qualified service department to get service.

Page 5

Installation

Antenna Connection

To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial.

Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied)

When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly.

Note:

When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the power switch on the TV while connecting the antenna lead. In thunder and lightning weather, please disconnect the outdoor aerial to avoid thunder/lightning strike.

Battery installation

(1) Remove the back battery cover.

(2) Insert two size AAA batteries according to

the polarity indication inside the remote controller.

Effective range of the remote control operation

Notes:

When the remote controller is not used for an extended period of time or the batteries are worn out, please remove the batteries in time to avoid battery leakage.

Avoid moisture and mechanical shock to

2. the remote controller.

Do not drop, dampen or disassemble the

3. remote controller.

Page 6

Appearance

Front view

Note: Functions of MENU, TV/AV, VOL+/-, CH+/- are also provided to the remote controller.

Back View

Page 7

Appearance

Remote Controller

Page 8

OPERATION

Turning the Power On/Off & Menu Operation

The following describes how to turn the TV on/off using the TV's main switch and the remote

controller.

To turn the power on/off

1. Press the POWER switch, the red power indicator lights up.

*Note: If there are no input signals to the TV when the TV set is on, a blue background will appear on

the screen. After 15 minutes if there are still no signals to the TV, it will enter into standby mode automatically.

3. Press the POWER switch to turn off the set completely.

Special indication:

Last-Mode-Memory: after turning off the power, the last TV mode, picture and sound setting mode and preset channels all are memorised. Therefore, next time you turn on the TV, the TV will work in the previous setting mode.

If you directly pressed the main power switch on the TV to turn it off, you must press the main power switch to turn on the TV.

If you pressed the main power switch to turn off the TV when in standby mode, press the main power switch and then operate from the remote controller to turn the TV on.

If no picture appears on the screen, press the button on the set or on the remote controller to turn the set on and the yellow indicator light up.

If you want to turn off the TV temporarily, press the button on the remote controller to switch the set to standby mode

Auto-Power-Off : there are two kinds of Auto-Power-Off function:

1. If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically turn off after about 10 minutes.

2. SLEEP-timer function.

3. OFF timer function.

Menu Operation

Press MENU button to enter into cartoon graphics menu page, press MENU button or POS+/- button repeatedly can select different graphics. The selected graphics is highlighted and the menu name will appear above the graphics (each graphics represents a menu) . Press VOL+/- button to enter into the sub-menu. To call, press RECALL button.

Page 9

OPERATION

Tuning in

There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu.

To preset channels (ASM)

Use the ASM (Automatic Search Memory) function to preset all the active channels in your local area automatically.

To enter into the PRESET menu

Press the PRESET button to display PRESET the menu on

the screen.( Or you can press the MENU button repeatedly to select and highlight PRESET icon, then press the VOL+/- button to enter into the PRESET menu.)

PRESET POS SKIP OFF

BAND FINE AFT ON SEARCH ASM S-RCV

Note: If there is any channel which is in CHILD LOCK ON mode, the PRESET menu can not be entered. How to enter into the PRESET menu to preset channels, please refer to page 17. In AV mode, press the MENU button, on the interface there are three icons in red background colour

(PRESET, SWAP, LOCK), which indicates these items can not be used in AV mode.

ASM (Automatic Search Memory)

PRESET

1.Press the POS+/- button to select and

highlight ASM

2. Press the VOL+/- button to start the ASM.

All active channels will be preset and

POS

SKIP BAND FINE AFT SEARCH ASM S-RCV

stored into the memory automatically. After

PRESET POS

SKIP ON BAND UHF FINE

AFT

ASM

S-RCV OFF

presetting, the TV will return to the first channel program.

During the process of ASM, pressing the PRESET button or MENU button on the remote controller

UHF

OFF

22 OFF UHF

OFF

will stop the process.

Note: Before ASM (Auto search), please set the current channel's colour system to AUTO and sound system to local area's sound system (refer to page 10), thus after ASM, all programs' colour and sound

system have been set correctly. Otherwise you should reset every program's colour and sound system

according to page 10.

Page 10

OPERATION

Tuning in (continued)

Use the SEARCH function if desired channels can not be preset with the ASM or if you would like to preset channels to specific position numbers one by one.

It is convenient to set the channel numbers to the same position numbers using SEARCH and SKIP functions.

To preset channels (SEARCH)

If ASM can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of SEARCH.

1. Enter into PRESET menu, press the POS+/- button to select and highlight POS. Press the VOL+/- button to select a desired position number (from 0-255). Note: you can also press 0-9 button to select a one-digit position number. Press --/--- button and number buttons to select a two-digit or three-digit position number.

2. Press the POS+/- button to select SEARCH. Press the VOL+ button to

search channels from current channel to higher channel. Press the VOL- button to search channels from current channel to lower channel. When a channel is located, the searching stops, this channel is then memorized with the preset position number.

Note: you can also make use of BAND selection to quicken the

searching process in your desired band. Press the POS+/- button to select BAND, pressing the VOL+/- button moves the band to the next one in the sequence below.

V-L V-H UHF

PRESET

POS

SKIP ON BAND V-L FINE AFT OFF SEARCH ASM S-RCV OFF

PRESET

POS

SKIP ON BAND V-L FINE AFT OFF

ASM S-RCV OFF

PRESET POS SKIP OFF

BAND V-H FINE AFT OFF

SEARCH ASM S-RCV OFF

3.When you want to store another channel at another position, repeat steps 1 & 2 above. Note: After SEARCH, to exit the PRESET menu, press the RECALL button, or press PRESET button or MENU button repeatedly until OSD disappears.

Page 11

OPERATION

Tuning in (continued)

To skip unnecessary position numbers and MFT (Manual Fine Tuning)

To skip a position number

After presetting the channel you can skip unnecessary position numbers so that only the channels you want to watch are selected with POS+/- button.

1. Enter into the PRESET menu, press the POS+/- button to select POS.,

then select the unwanted program number with the VOL+/- button.

PRESET

POS

SKIP OFF BAND UHF FINE AFT ON

SEARCH ASM S-RCV OFF

2. Press the POS+/- button to select "SKIP".

Press the VOL+/- button to select "SKIP ON". Thus, after exiting the menu, the position number will then be skipped when you select programs with the POS+/- button. If you want to skip other unwanted programs, repeat step 1 above to change the program number.

Note: you can select the skipped channel by pressing the direct channel

PRESET

POS

SKIP ON

BAND UHF

FINE

AFT ON

SEARCH ASM S-RCV OFF

select buttons, and the position number displayed on the screen is in red.

To restore skip a position number

Enter into the PRESET menu, Select the position number you want to restore. Press the POS+/- button to select "SKIP". Press the VOL+/- button to select "SKIP OFF".

MFT (Manual Fine Tuning)

When picture and sound's effect of a channel is poor (for example: one or two CATV channel's picture and sound are not standard), you can correct them by making use of Manual Fine Tuning (FINE).

1. Enter into PRESET menu, select the program number you want to fine-tune.

PRESET POS

SKIP OFF BAND UHF FINE AFT ON

SEARCH ASM S-RCV OFF

2. Press the POS+/- button to select FINE, then press and hold the VOL+ or VOL- button, the channel begins fine tuning until the optimum picture and sound is achieved. (Press VOL+ button to fine-tune upward, while VOL- button to fine-tune downward. The AFT function will be set to OFF mode automatically)

PRESET

POS

SKIP OFF BAND UHF

FINE

AFT ON

SEARCH ASM S-RCV OFF

(or OFF)

Note: if some channel’s colour or sound is abnormal, it may be that the setting of the colour or the sound system is wrong, please do adjustment according to The setting of colour and sound system (on page 10) to set the proper colour and sound system.

Page 12

OPERATION

Tuning in (continued)

AFT (Automatic Frequency Tuning)

If picture and sound’s effect of the channel is instead poor by making use

of FINE, you can correct them by making use of AFT. Enter into the PRESET menu, press POS+/- button to select AFT, press VOL+/- button to select AFT ON. Note: If the program is in AFT ON, the position number displayed on the screen will be in green.

The setting of colour and sound system

Press the RECALL button, the colour and sound system will be displayed on the screen.

If the colour is abnormal, press the C-SYS button to select proper colour system. Every time you press the C-SYS button, the colour system will change in the sequence below.

PRESET

POS

SKIP OFF BAND UHF FINE AFT OFF

SEARCH ASM S-RCV OFF

AUTO

B/G

PAL

B/G

AUTO

If the sound is abnormal, press the S-SYS button to

PAL N3.58 N4.43

select proper sound system. Every time you press the S-SYS button, the sound system will change in the sequence below.

M/NB/G

D/K

Now you can watch the broadcasting TV program on the preset channels.

Note: You can also make use of SYSTEM menu to set the colour and sound system. (Refer to SYSTEM SETTING on page 14.)

PAL

B/G

Page 13

OPERATION

Channel selection

You can watch TV programmes being broadcast on the preset channels.

To watch a TV programme

You can select your desired TV program by one of the following methods.

Using the direct select buttons (0~9) and --/---button

To select a one-digit position number (0-9)

Press the 0~9 button directly.

To select a two-digitposition number (10-99)

Press --/--- button to display -- on the screen, then press the channel number.

To select a three-digit position number (100-255)

Press --/--- button to display --- on the screen, then press the channel number.

Using the POS+/- buttons

Press POS- to select lower position numbers; POS+ to select higher ones.

AUTO

B/G

AUTO

B/G

125

AUTO

B/G

Using the PREVIOUS channel button ( )

Press the button on the remote controller can swap the current viewed channel with the previous one. For example, the channel you previously watched is 11, the present channel is 2, press the button, it will return to channel 11, press the button again it will return to channel 2.

Page 14

OPERATION

Convenient Picture and Sound Controls

Selectable picture

To select the picture mode

You can select the picture quality instantly among four preset modes and one user-set mode. Press the P.M button to select the desired picture quality.

SOFT, STANDARD , VIVID , LIGHT and PERSONAL

(user-set) can be selected cyclically.

To set the desired picture quality to the MEMORY position

SOFT

STANDARD VIVID LIGHT

PERSONAL

1. Press the PIC button repeatedly to select the desired adjusting item. Press the VOL+/- button to adjust the level.

Pressing

Item

COLOUR

BRIGHTNESS

CONTRAST

SHARPNESS

*TINT purplish greenish 00 00 00

(PERSONAL)

VOLpaler deeper 38 38 50 50

darker lighter 45 50 48 58

weaker stronger 28 50 63 63

softer sharper 16 32 34 34

VOL+

SOFT STANDARD VIVID LIGHT

* TINT is for NTSC system only. The adjusted level is stored in the MEMORY position.

Adjusting the volume and muting the sound

To adjust the sound volume

PICTURE

BRIGHT

CONTRAST

COLOUR

SHARP

TINT

PICTURE

BRIGHT

CONTRAST

COLOR

SHARP TINT

Adjust the sound volume with the VOL+/- buttons. Press the VOL- button to decrease the sound. Press the VOL+ button to increase the sound.

To mute the sound

The muting function is convenient when you need to pay attention to surrounding sounds, answer a phone call, receive a visitor, etc.

Press the button to mute the

sound.

To restore the sound, press the button again or VOL+/- buttons.

VOLUME

MUTE

Page 15

OPERATION

CLOCK SETTING

CLOCK menu

Press the CLOCK button to display the CLOCK menu. (Or press the MENU button repeatedly to select and highlight CLOCK icon, and press VOL+/- button to enter into the CLOCK menu.)

TIME setting

Making use of this function can set the current time for the TV.

Press the POS+/- button to select and highlight TIME. Press the VOL- button to set the hour (0~23). Press the VOL+ button to set the minute (00~59).

OFF-TIME setting

Making use of this function can automatically turn off the TV at a preset time, and bring the set to standby mode.

Press the POS+/- button to select OFF-TIME. Press the VOL- button to set the hour (0~23) press the VOL+ button to set the minute (00~59). Once the preset time has elapsed, the TV will automatically go into standby mode.

CLOCK

TIME --:-OFF-TIME --:-ON-TIME

POS

CLOCK

TIME 18:23

OFF-TIME --:-ON-TIME

POS

CLOCK

TIME 18:24

OFF-TIME 22:50

ON-TIME POS

--:--

ON-TIME setting

Making use of this function can automatically turn on the TV at a preset time to a preset channel.

CLOCK

TIME 18:25

Press the POS+/- button to select ON-TIME. Press the VOL- button to set the hour (0~23), press the VOL+ button to set the minute (00~59). Press the POS+/- button to select POS., press the VOL+/- button to set the TV ON position number. (Or you can press 0~9, --/--- button to set the position number).

Press the button to switch the TV to standby mode. At the preset time, the TV will turn on automatically to the preset channel.

Note:

Once the function of ON/OFF TIMER has been fulfilled, next when you want to use the function once more, you should set them again.

OFF-TIME 22:50

ON-TIME

POS

CLOCK

TIME 18:24 OFF-TIME 22:50 ON-TIME

POS

19:00

--:--

Page 16

OPERATION

System setting

SYSTEM menu

Press the MENU button repeatly to select and highlight the SYSTEM icon. Press the VOL+ button to enter into the menu of SYSTEM.

SYSTEM

To select the language for the OSD (on-screen display)

Making use of this function can switch the language for the OSD to either English or Chinese.

To switch the OSD language from English to Chinese, press POS+/- button to select CHINESE ( ),press VOL+ button, the screen menu is automatically displayed in Chinese. To switch the OSD language from Chinese to English, press POS+/- button to select (ENGLISH) press VOL+ button, the screen menu is automatically displayed in English.

B/B (blue background) setting

With the B/B (blue background) function ON, the TV will automatically turn blue when no signal is being received. In SYSTEM menu, press the POS+/- button to select B/B. Press the VOL+/- button to change the B/B (blue background ) setting ON or OFF. To exit the menu, press the MENU button repeatedly or press RECALL button.

V.ZOOM setting

Making use of this function can change the screen’s vertical size. Press POS +/- button to select V.ZOOM press VOL+/- button, LEVEL.-2, LEVEL.

-1, NORMAL, LEVEL. 1, LEVEL.2 can be selected. You can select one of them according to actual need, for example, to view wide screen movie VCD.

SYSTEM

CHINESE

ENGLISH B/B ON V.ZOOM C-SYS

S-SYS B/G

SYSTEM CHINESE

ENGLISH B/B ON V.ZOOM C-SYS

S-SYS B/G

SYSTEM

CHINESE ENGLISH B/B ON

V.ZOOM

C-SYS S-SYS B/G

NORMAL

AUTO

CHINESE ENGLISH

NORMAL

AUTO

B/G

NORMAL

AUTO

LEVEL.1

AUTO

FIG. 1

Colour/sound system selection

In SYSTEM menu, press the POS+/- button to select C-SYS (or S-SYS) item.

Press the VOL+/- button to select proper colour (or sound ) system. To exit the menu, press the MENU button repeatedly or press RECALL button.

FIG. 2

SYSTEM

CHINESE ENGLISH B/B V.ZOOM

C-SYS

S-SYS

LEVEL.1

PAL

B/G

Page 17

OPERATION

Playing Games

In this TV set there are two built-in games: Falling Cube and Millennium Alien. Below we will describe how to make use of them.

To enter into Game

Press MENU button to select and highlight GAME icon. Press VOL+/- button to enter into GAME

SELECT menu.

To select Game

In GAME SELECT menu, press POS+/- button to select one of the games, press VOL+/- button to enter into the game.

Making use of FALLING CUBE

Enter into FALLING CUBE. On the screen, there are falling cubes, pressing VOL+ button can move the cube rightward, pressing VOL- button move the cube leftward, pressing POS- button can let the cube falling quickly while pressing MENU button can rotate the cube.

GAME

GAME SELECT FALLING CUBE MILLENNIUM ALIEN

When at the screen’s left playing area one row has been filled with the cubes, the row will flash and disappear, and your score will gain one point. If two rows disappear at the same time, your score will gain three points. If three rows disappear at the same time, your score will gain seven points.

The right window provides hints about next cube’s shape, you can arrange current cube’s position and angle in advance.

You should try your best to improve your score. If you make mistakes and let the cubes pile too high, it will become more difficult to improve your score. When the cubes reach to top, the screen will display GAME OVER, and the game is finished.

To exit the game playing (during the playing or when in gameover), press AV/TV button on the remote controller.

Page 18

OPERATION

Playing Games (continued) & SLEEP Timer

Making use of MILLENNIUMALIEN

Enter into MILLENNIUM ALIEN, there are characters "SHOOTING START" flying from right to left. When the characters have flied over, you can

begin to shoot. Pressing VOL+ button can move the battleplane on the lower screen rightward, pressing VOL- button can move the battleplane leftward, pressing POS+/- button can shoot the bullet out.

When shooting, you should pay attention not to be hurt by opponent’s bullet. Every time you are shot by opponent’s bullet, your life value will lose one point (there are three points altogether, and SHOOTER on the upper screen will show them.)

There are stages in playing games (shown by STAGE on the upper screen.). At the beginning the stage is 1, at this time if you hit the opponent for one time, the opponent’s array will lose one person, and your score will gain 100 points.

When stage 1 is finished, the screen will show Mission Complete and BOSS STAGE. At this time you should pay attention to the quick bullet shot by the flying machine and the STAGE is 2, Every time you hit the opponent for one time, your score will increase 100 points.

The game will go on repeatedly in this kind, if your life value has used up, the game is over and the screen will display GAMEOVER.

To exit the game playing (during the playing or when in gameover), press AV/TV button on the remote controller.

Note: If you want to restart playing games when game is over, you should exit the game first, then reenter into game and begin.

Only buttons on the remote controller can be used during playing games.

Sleep timer

SLEEP timer

Making use of the Sleep timer function allows you to have the set automatically turned off after a preset time, and set the TV set to standby mode.

Press the SLEEP button every time, the time displaying on the screen will change in the sequence below:

120MIN

30MIN60MIN90MIN

SLEEP

Page 19

OPERATION

Other functions

CALENDAR function(1800-2299)

Press MENU button repeatedly to select and highlight

CALENDAR icon, press VOL+/- button to enter into calendar interface. Pressing the POS+/- button can check years' calander forward or backward. Pressing the VOL+/- button can check months calendar of some year forward or backward.

To exit the calendar interface, press RECALL button.

CHILD LOCK setting

CALENDAR

MAR 2001

SU MO TU WE TH FR SA

1 2 3

4 5 6 7 8 9 10

12 13 14 15 16

11 18

19 20 21 22 23

25 26 27 28 29 30

24 31

Press the MENU button repeatedly to select and highlight LOCK icon.

Press VOL+/- button to enter into CHILD LOCKsetting interface, mess POS +/- button to select "CHANGE PASSWORD" or to select "ENTER PASSWORD" to set child lock or change child lock.

To change password

Select CHANGE PASSWORD and press VOL+/- button to enter into the menu, input the former password, please press the digit keys to enter the former password (the preset password is 1234) If the correct password is input, the cursor will move to next row "NEW PASSWORD" automatically, please press the digit keys to enter the new 4-digit password. After inputting, press POS+/- button to move the cursor to

"ENTRY", and press VOL+/- button to confirm and exit the menu.

To set child lock or change child lock

LOCK

CHILD LOCK

CHANGE PASSWORD

ENTER PASSWORD -----POS. 9 LOCK OFF

CHILD LOCK

ENTER PASSWORD

NEW PASSWORD ENTRY

Enter into CHILD LOCK menu, move the cursor to “ENTER PASSWORD”, input the password, if the password is correct, the cursor will move to next row automatically. Pressing POS+/- button can change the program number, pressing VOL+/- button can set the program’s child

CHILD LOCK CHANGE PASSWORD ENTER PASSWORD -----POS. 9 LOCK OFF

lock mode in ON or OFF. When the program’s child lock is set ON, this program has no content and the whole screen is in yellow. Note: as long as there is one program whose child lock is set ON, the PRESET menu can not be entered. Please enter into the CHILD LOCK menu to check. If you want to preset channels reagain, please do steps above to set the program's child lock to OFF until all the programs are in child lock OFF.

Page 20

OPERATION

Other functions (continued)

CHANNEL SWAP

Making use of CHANNEL SWAP you can reorder the programs in your favorite order.

Press the MENU button repeatedly to select and highlight SWAP icon. Press VOL +/- button to enter into CHANNEL SWAP menu. Press POS +/- button to select "POSITION A: -" item, then input the desired channel number which you want to swap by pressing "0-9" or "--/---" button.

Press POS+/- button to select "POSITION B: -" item,press "0-9" or "--/---" button to input the channel number which you want to swap to. Press the POS+/- button to select "EXCHANGE" item, press VOL +/- button to confirm. Then channel A and channel B’s programs are swapped.

Super receiving function

Below we will describe how to make use of super receiving function. Pressing the SUPER button on the remote controller can change the current program’s super receiving mode to ON or OFF. Or you can press PRESET button to enter into PRESET menu, press POS+/-button to select S-RCV item, press VOL +/- button can change the current program’s super receiving mode to ON or OFF.

SWAP

CHANNEL SWAP

POSITION A: 5 POSITION B :14 EXCHANGE : OK

S-RCV ON

PRESET POS

SKIP OFF BAND UHF FINE AFT OFF

SEARCH ASM S-RCV OFF

or ON

Note : 1) After AUTO SEARCH (ASM). all the searched programs are set to S-RCV OFF automatically

2) When receiving signals are stronger, please set to S-RCV to OFF mode

Program Scan

Press SCAN button, the TV set will scan the channels from current channel to higher channels one by one, the upper right corner of the screen will display position number, ever program will be displayed for about 2 seconds and then go on scanning until all the programs are scanned over. Press SCAN button again, the screen will settle at the current scanned program.

SCAN

Page 21

CONNECTING OTHER EQUIPMENT

External Equipment Connections

This set is incorporated with Audio & Video input and output terminals which allow direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and recording the programs. Refer to the owner’s manual of the equipment to be connected as well.

Video playback

The figure below shows how to connect the TV set to the video equipment.

Or you could use another group of AV IN terminals on the front cabinet as follows.

Note: As regards the AV input terminals, connect either the front or rear terminals but not both.

Press the "AV/TV" button on the remote controller to select AV mode, "AV" and corresponding colour system will be displayed on the screen. The picture displayed on the screen is the program played back by the video equipment.

Recording TV program

The figure below shows how to connect the TV set to the VCR

Press AV/TV button on the remote control unit to set the TV receiver to TV mode, and choose the desired channel. At this time, the program recorded is the one displayed on the screen. (The VIDEO/AUDIO output terminals only output TV signals.) Note: the following mis-operation should be avoided during recording. * Press STANDBY button or set to AV mode. * Change the current channel accidentally

Page 22

OTHERS

Troubleshooting Guide

Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.

Symptoms

No power, red indicator is not lit up Poor colour, poor tint

Spots appear on the screen

Stripes appear on the screen

Picture is distorted, disturbed or lost

Double images or “ghosts”

Snowy picture

The remote controller does not work

PRESET menu can not be entered

CHANNEL SWAP menu can not be entered

CHILD LOCK menu can not be entered

TV cabinet creaks

Unevenness in colour in some parts of the screen.

Check for the following items

Be sure the power cord is plugged in.

Contrast, colour, tint are not correctly adjusted.

Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc.

Super receiving is set ON. When the signals are not too weak, turning on the super receiving may cause stripes.

Possible interference of electronic interference from another TV set, a computer, an electronics game machine, a broadcast station, etc.

Super receiving is set ON. When the signals are stronger, turning on the super receiving may cause distorted picture, or picture is disturbed or lost.

This may be caused by reflections from nearby mountains or buildings.

Check the antenna direction.

It is possible that the aerial “lead-in” is damaged or comes off.

Check the antenna direction

The batteries may be worn out.

The batteries may be installed with their polarity reversed.

The set may be in AV mode.

There may be at least one program which is in child lock ON mode.

The set may be in AV mode.

Even if the picture or the sound is normal, changes in the room temperature sometimes make the TV cabinet expand or contract, making a noise. This does not indicate a malfunction.

When the set is switched on, do not shift or move the set around. Sometimes it may develop an unevenness in colour in some parts of the screen. This can be eliminated by switching off the set with the POWER switch and wait for 10 minutes before switching on again.

Page 23

OTHERS

Specifications

Power supply:

Power consumption: Dimensions(mm): Weight(kg):

CRT

TV system & channel range

System VHF PAL-B/G 2-12

Colour system:

Sound output: Accessory:

* Note: Design and specifications are subject to change without notice.

AC 240V, 50Hz

< 70W

550 (W) x 475 (H) x 470 (D) 23

51cm

UHF

21-69

PAL-BG, NTSC (AV)

2.5W One remote controller

CATV X~Z+2, S1~S41

Page 24

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL:(02)9313 7111

FAX:(02)9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA: 1300 657 888

604-A21Y3-01