IMPORTANT
Please read these instructions
carefully before you start to assemble this carport.
Please carry out the steps in the
order set out in these instructions.
Keep these instructions in a
safe place for future reference.
» Care and Safety advice
Please follow the instructions as
listed in this manual.
Sort the parts and check against
the list of contents.
For safety purposes we strongly
recommend that the product will be assembled
by at least two people.
Some parts have metal edges.
Please be careful when handling components.
Always wear gloves, shoes and
safety goggles during assembly.
Do not attempt to assemble the
carport in windy or wet conditions.
Dispose of all plastic bags safely
- keep them out of reach of small children.
Keep children away from the
assembly area.
Do not attempt to assemble the
carport if you are tired, have taken drugs,
medications or alcohol, or if you
are prone to dizzy spells.
When using a stepladder or
power tools, ensure that you are follow the
manufacturer's safety advice.
Do not climb or stand on the
roof.
Heavy articles should not be
leaned against the poles.
Do not hang or lay on part 216.
Please consult your local
authorities if any permits are required to erect carport.
Keep roof and gutters clean of
snow, durt & leaves.
Heavy amounts of snow on roof
can damage the carport making it unsafe to
stand below or nearby.
This product was designed and
produced to be a carport only.
» Some versions of this carport are
painted.
If color was scratched during
assembly it can be fixed with the following tints:
Gray - RAL 7012
» Cleaning instructions
When your carport needs
cleaning, use a mild detergent solution and rinse with
cold clean water.
Do not use acetone, abrasive
cleaners, or others special detergents to clean the panel.
Before stating assembly
This carport must be assembled
on a solid base (such as concrete or asphalt).
Choose your site carefully before
beginning assembly. Site surface (mainly below poles)
needs to be level.
During assembly use a soft
platform below the parts to avoid scratches and damages.
»T001 -
» Notes (by steps)
Step 7: Screw 4000 intended to keep the parts
(gable) stable
till gutters will be assembled. If a third person can
hold the
parts till Step 8, this screw can be assembled with
all the
others at Step 30.
During assembly some screws are fastened fully
by wrench
while others are fastened just after the whole
carport is
assembled and leveled (Step 21).
Tighten all screws when completing assembly.
Notice the marks on each step:
ZZ:Zzzzj