PALI Emilia Forever Crib Assembly Manual
Round Allenhead Bolt
D1xA
1x
1x
2x
IMPORTANT:
In order to properly assemble the
crib, carry out the operations in the order specified.
Failure to assemble the crib in the manner
recommended could make the crib hazardous.
Carefully remove and lay out all parts. Familiarize
yourself with all diagrams to facilitate the assembly
of your crib. Check parts enclosed in hardware bag
with the HARDWARE PARTS LIST to be sure all
are included and quantities are correct.
INSTRUCTION LEAFLET
Important, keep for future reference. Read
carefully.
Dorval, QC
H9P-1J5 Canada
customerservice@pali-design.com
Footboard
(F)
End Panel
(G1 + G2)
Mattress
Round Allenhead Bolt
Adult
assembly
is required.
8x
B
4x
www.pali-design.com
1x
2x
This crib has been designed for your child's
comfort and your convenience. Quality material
and workmanship have gone into this crib which
will provide a sound and comfortable bed for your
baby if properly assembled and maintained. For
the security of your child and your own peace of
mind be sure to follow the assembly instructions
exactly. Adult assembly is required. A periodic
check should be made of all bolts and screws,
which should be tightened if needed. Moisture
and heat are harmful to the finish; for this reason
use extreme caution when vaporizer is in use. The
vapor steam should always be aimed away from
the crib as well as away from other wood furniture.
Some types of sof t plastic toys could damage the
finish when placed against it.
Hardware Parts List
C
Phone: 1-514-421-0309
Assembly
Instructions
Emilia Forever Crib
Pali Design, Inc.
1525 Hymus Boul.
Round Allenhead Bolt L-Shaped All en Wrench
Crib Parts List:
Headboard
(E)
Support
(H)
G1
G
2
Pali Design, Inc. AIM-9100-090630-1145 Page 1 of 6
CRIB
Attaching the Footboard
2
• To assemble the crib in the highest mattress
support position, please see Step 1.
• When using the crib as a t oddl er bed, remove the
Footboard and the lower mattr ess support position
must be used.
Assembling Crib
1
• This crib has three matt r ess support posi tions for
use in your baby's first months.
• As soon as baby starts to sit up you must use the
low mattr ess support posi t ion.
CRIB
CRIB
Step
Step
Attaching the End Panels
Three
countersunk
holes are
provided to attach
the end panel to
the headboard
and two insert
nuts for the
footboard.
C
B
F
Top
Bottom
G1
G2
Top
Bottom
E
Three inserts
are provided
for the
mattress
support
Insert nut set for
Univers al Ra il
Conversion Kit
Both End
Panels
Both End
Panels
C
C
C
C
C
C
C
C
E
E
G1
G2
E
C
C
B
C
B
Pali Design, Inc. AIM-9100-090630-1145 Page 2 of 6
Loading...