PAL Electronics SG314GI-WR User Manual

Pal Gate SG314GI-WR
Indication
Indication
cellular network
Is a 4G network system for opening automatic gates, garage doors, electric locks and roadblocks via an application, dial in, secured remote control (transmitter) and Wiegand protocol. The system can be controlled from a web interface (optional), which enables complete and secure control of the unit such as:
• Administrators set up.
• Add and remove users.
• Set up relay time.
• Gate interruption alerts.
Real time log reading on system usage.
System features and benefits :
• Internet interface management ability.
• Very small physical size 70X50 mm.
• 4 indicator LED lights (active SIM + 3 reception indicator)
• Multiple administrators and authorized users can be configured for optimal control.
• Supports Wiegand protocol
LEDs key
MeaningLEDs
System is bootingFast flashing of the SIM light
Slow flashing of the SIM light
2 blinks and break
Sim LED blinks 4 times
Module is looking for a
connecting to the Internet process Connecting to the PAL interface Poor signalSim LED blinks slow
• There is unlimited number of managed systems.
• The unit includes one output – Relay N.O (60V/900mA)
• The unit includes one input alert– N.O When a status change is made (N.O to N.C or opposite), email will sent to the unlimited requested destinations.
• You can set the time from the entry status change until the unit sends an alert.
• Setting an alert is made by Pal web interface.
SIM Status LED
4G Antenna connector
433Mhz
Antenna
Signal
connector
System readySim LED is stable
Low signalSignal light No. 1 is on
Good signalSignal light No. 2 is on
Very good signalSignal light No. 3 is on
GND
Input alert
WIEGAND
D1
D0
Relay N.O
60V/0.9A
Maximum
load
Input voltage
A VDC1V/12
Setting up a remote control in the unit
The actions are carried out trough an Internet interface, such as: Insert remote control, delete remote control, setting groups, assigning days, selecting relay to open, and more ­are carried out trough the web interface only (for details, contact the installer).
System settings by the App :
Primary Login: This application must be first installed from the App Store / Google play by searching for the name PalGate or scan this QR Code for direct link.
______________________________________________________________________________________ PAL Electronics Systems, HaTa'asiya 25 st, Ra'anana, POB 2516 Israel 4365413, Tel: +972-9-7920667
Website: www.pal-es.com, Email: info@pal-es.com. (2) 1
Run the application and to act according to the instructions :
2
installation:
Gate setting:
Click the + button
to add Gate
Add User/s:
Add your
cellophane
number
Scan barcode or
add manually
Confirm your
number
Device details - Serial
number and code
are printed on the
device and should be
added accordingly
After adding the
phone number
wait for
verification code
After adding the
details click next
Add the
verification code
The gate will
appear on my
gates screen
Click on the Gate
Settings button
Important Information:
Click on manager
options
Click on users
Click Add (+)
Add name or select from the contact list and
save
Installation at the gate (inside each metal cabinet) must be installed when connected to an external antenna (an
antenna outside the cabinet).
Requires stable power supply source preferably DC transformers.Avoid installation in metal boxes.Protect the unit from humidity and insect infiltration.The system works via a cellular network using 4G technology. In addition, the system's performance is dependent on the
existence of coverage by the cellular network. Pal Electronics Systems Ltd. is not responsible for non-coverage of the cellular network. The customer is responsible for ensuring that there is cellular network reception using 4G technology.
______________________________________________________________________________________ PAL Electronics Systems, HaTa'asiya 25 st, Ra'anana, POB 2516 Israel 4365413, Tel: +972-9-7920667
Website: www.pal-es.com, Email: info@pal-es.com.(2)
Loading...