Paladin Electrical Cable, Industrial Cable Catalog Page

Electrical & Industrial Cable Crimpers

Angled head

EZI-Change™
Thumb Screws

Phone [phone]

Higher crimp force

8022

CrimpALL®Series Crimpers

The 8000 Series CrimpALL®is designed with user satisfaction
in mind. This world-class crimp tool is designed for superior
comfort and ease of use. It is an exceptional value and
uses the same die sets as our 1300 Series crimpers.

Features:

■ Ultra-smooth, fully ratcheting crimp cycle with

built-in safety release

■ Interchangeable die sets of heat-treated steel for long life

■ Soft, rubber-embedded handles

■ Long-lasting tool that delivers over 50,000 crimp cycles

■ Rugged, double-plated jaw design to increase life span

■ Lifetime warranty on tool; one-year on die sets

Advantages:

■ Angled head to prevent awkward wrist bending during operation

■ Reduced handle grip distance makes it easy for both small

and large hands

■ Higher crimp force produced with less hand force so hand

doesn’t tire as quickly

■ No breakover hand force – the effort required by most crimpers

to make the last click at the end of the cycle to complete the
crimp – the CrimpALL does the work!

■ Manufactured using the newest fine blanking technologies

■ EZI-Change™ die screws make changing dies quick and easy –

no screwdriver required

No breakover force

Reduced grip distance

Ultra-smooth ratchet design

makes this tool a dream to use.

Lanyard hole

Comfortable to use

for any size hand.

Technical Weight Length

CrimpALL®tool frame 21 oz. (600 g) 9.84" (250 mm)
Die set 2 oz. (57 g)

Ordering Part number

CrimpALL®tool frame 8000
Replacement EZI-Change™ die screws (2) 2303
Replacement fixed die screws (2) 2306
Replacement handles 8000.9

82

www.paladin-tools.com

solutions

▼

The first crimp tool with

a double-plated jaw design

f

or longer life span

Fax [phone]

Part Numbers Description

Insulated Terminal Crimpers

Crimpers Electrical & Industrial Cable

Tool & Die: 8021 Insulated Terminals and Lugs, Solid or Stranded Wire, 22-10 AWG (.34-6.0 mm2),
Die Only: 2035 12-10(Yellow)/16-14(Blue)/22-18(Red) (6-4/2.5-1.5/.34-.75 mm

For Large Professional Terminals (Panduit, T & B, etc.)

Tool & Die: 8022 Insulated Terminals and Lugs, Solid or Stranded Wire, 22-10 AWG (.34-6.0 mm
Die Only: 2040 10-12(Yellow)/16-14(Blue)/22-18(Red) (6-4/1.5-2.5/.34-.75 mm

For Standard Commercial Terminals (Hardware Store Brands)

Tool & Die: 8023 Insulated Terminals and Lugs, Solid or Stranded Wire, 26-14 AWG (.10-2.5 mm
Die Only: 2029 16-14(Blue)/22-18(Red)/22-26(Yellow) (1.5-2.5/.34-.75/.34-.10 mm

For Smaller Wire Barrel Terminals

Non-Insulated Terminal Crimpers

Tool & Die: 8024 Non-Insulated Terminals and Lugs, Solid or Stranded Wire, 22-8 AWG (.34-10 mm2),
Die Only: 2031 10-8/14-12/18-16/22-20 (6-10/2.5-4/.75-1.5/.34-.50 mm

For Standard Commercial Terminals

Open Barrel Contacts, Box Contacts, and Terminals Crimpers

Tool & Die: 8026 Open Barrel Non-Insulated Terminals and Lugs - narrow, Stranded Wire,
Die Only: 2033 22-14 AWG (.34-2.5 mm

(.34-.75/1.5-2.5/4-6 mm2), For Standard Commercial Terminals

Tool & Die: 8027 Open Barrel Non-Insulated Terminals and Lugs - wide, Stranded Wire,
Die Only: 2096 22-14 AWG (.34-2.5 mm

For Standard Commercial Terminals

Tool & Die: 8029 Open Barrel D-Sub Contact Pins, Stranded Wire, 28-20 AWG (.08-.5 mm
Die Only: 2097 F-Type*, 28-24/22-20 (.08-.2/.34-.5 mm

For Standard D-sub Pins Only

2

),

2

),

2

)

2

), F-Type*, 22-18/16-14/12-10,

2

), F-Type*, 16-14/22-18 (1.5-2.5/.34-.75 mm2)

2

)

2

),

2

),

2

),

2

),

NOTE: For the crimpers and die sets above, the pin AWG size must be inside the range of the crimp area AWG size to work.
For example, if the area is for 28-24 AWG, the pin must have an AWG size rating between 28-24, no smaller and no larger.
In this example, a 28-22 AWG rated pin will not work; it is too large in size.

*This is also known as “B-Type.”

Wire Ferrule Crimpers

Tool & Die: 8025 Insulated & Non-Insulated Wire Ferrules, Stranded Wire, 22-10 AWG
Die Only: 2095 (.34-6.0 mm

2

), 22-20/18-16/14-12/10 (.34-.50/.75-1.5/2.5-4/6 mm2)

For DIN or US Type Wire Ferrules

solutions www.paladin-tools.com

▼

83