Paladin 23321 User guide
GB
Instruction Manual - Time switch with Astro function - 17,5 mm
Connection diagram
1. Safety instructions
2. Initial operation
!
!
!
!
The electronic circuit is protected against a wide
range of external influences. Incorrect operating
The time switch is delivered in sleep-mode, the display is switched off.
When using the astro function it is obligatory to enter the geographical position of the place of the installation of
3. Menu overview
4. Symbol legend
Power plug symbol (flashing): While the power supply is disconnected, the display shows a
button for 1 sec. to “wake up” the time switch.
Current state is based on a manual over-ride. The state will be cancelled with the next
Days of the week Monday, Tuesday, ... Sunday;
Menu Program
Menu Adjustment
Menu Options
Extra
switching time
Program query
To query the programming steps and remaining
Summertime
Counter
Displays the hour counter and pulse counter for each channel and the
Within Program modify each single switching time can
Adjust your geographical position with predefined choice of regions/countries and cities or
with longitude, latitude and time zone.
ivated. If you have forgotten the Code
Language
Choice of languages
Factory
Defaults
Reset to the state of delivery. Date, time and
5. Key function
6. Channel ON OFF / Permanent P
Automatic-Mode
Menu / Enter-Mod e
ON OFF
To access the Enter-mode (program, adjustments, options)
To switch the channel ON or OFF until the next
programming step occurs.
To activate the time switch when operated without power
7. Program permanent / Extra switching time / Reset
Permanent
One permanent by date programming step (holiday function) for each channel is possible. During the desired period (The function is valid for the whole days) the channel can be switched off (permanent off) or on (permanent on).
Extra
switching time
You can program further “extra” switching times e.g. if you like to use a channel of the time switch for a non-“Astro lighting-application”. You have to activate the “extra switching times” within the menu Options. The “extra switching
Reset-Function
Press all front keys for 2 seconds. The time switch is reset. The values for date and time will be deleted and have to be re-entered. The switching program has not been deleted!
8. New program
New program
Program modify
Program delete
See point 8 (New program)
memory locations
be modified.
Deletion of switching time(s). The program for all
channels, single channels and single programming
steps within on channel can be deleted.
The installation and assembly of electrical
equipment must be only carried out only by a
skilled Person! Otherwise fire danger or danger
of an electric shock exists!
Connect the supply voltage/frequency as stated
on the product label!
Warranty void if housing opened by
unauthorised person!
may occur if external influences exceed certain
limits!
Date-Time
Astro
Adjustment of date and time
Adjustment of the daylight saving time mode
switching program will be lost!
Press -button for 1 second.
The current date and time is already programmed and European daylight savings time is activated.
Select the desired language by pressing -buttons and confirm it by pressing .
(Remark: By pressing you move one step backwards from the current position)
If required, date, time and daylight savings time mode can be adjusted also by pressing -buttons and a
subsequent confirmation with .
the device. Choose with -buttons between „location“ (pre-defined cities) and „position“ (longitude and
latitude). Confirm your choice again with . (The easiest way is choosing a pre-defined city within the
„locations“-menu.)
Enter the nearest city or the geographical coordinates with -buttons and confirm with
power plug symbol (flashing). The time switch is then operated in the reserve mode. Press OK-
/ / P
Channel is switched ON / Channel is switched OFF / Permanent
For the current date the “holiday program” / “permanent by date” is activated
Standard programming step
programming step.
The underscores indicate if the program is active for the days above.
Astro function: Current state is based on a sunrise or sunset taking into account an optionally
adjusted Offset.
The time switch is locked; to unlock the device the PIN has to be entered.
See point 7/8
time switch itself.
PIN-Code
The time switch can be locked with a 4-digit PIN-Code. The code can
be adjusted, activated and deact
please call customer service.
from the automatic-mode
supply.
To revert to the beginning of the current (sub-) menu
To adjust the flashing digit. To scroll through a choice
To confirm the selection or the entered data.
The choice permanent will not be offered anymore within the menu new program when already in use. The switching time can be modified and deleted within Program modify and Program delete respectively. (See Point 8)
times” works like a standard weekly program (ON / OFF). After activating the “extra switching time” it will be offered within the programming menu “new program”. (See Point 8)
Channel
By pushing -buttons a manual switch of the channels take place. The resulting switching status is marked with the
hand-symbol and remains until the next programming step occurs. (temporary over-ride)
Permanent switching status P
By pressing the corresponding channel button for more than 3 sec. the channel is permanently switched ON or OFF.
The status remains until the next manual switching occurs (> 3 sec.). (permanent over-ride)
SONDER BA 173113pro_N;DE,GB,FR,IT -ONLY WEB- 2010.12-V03
Loading...