PAJ GPS EASY User Manual

USER MANUAL

EASY FINDER

Comment:

Thank you for the purchase of our finder. This

guidance will show you the handling and

operation of the product. Please keep this

manual for future reference purposes.

EASY Finder v.1.1ENG

2

Is this manual too small for you?

For this guidance, we have chosen a particularly small print format, so that you will be able to put it in your pocket or in your car, without requiring too much space.

If this manual is too small for you, it is possible to find a current version of it as a PDF here:

www.paj-gps.de/downloads-anleitungen.de

You can display the file in any size and even search for individual keywords. Ist Ihnen diese Anleitung zu klein?

EASY Finder v.1.1ENG

3

Still not satisfied?

Then contact us! We will take care of your problem as soon as possible, so that you can be satisfied!

Contact: Phone: +49 (0) 2292 39 499 59

E-Mail: info@paj-gps.de

We would be pleased if you did not directly

open a case or leave a negative feedback, but

give us first the opportunity to find a solution to

your problem. This would be of benefit to both

parties. Contact us and we will gladly help you!



EASY Finder v.1.1ENG

4

Satisfied?

If you are satisfied with our product, then we would be very happy to get a positive feedback or 5 stars from you!

Best regards and many thanks, your PAJ-team

Artikel wie

beschrieben

Kommunikation

Versandzeit

Versand- und

Verpackungskosten

Kriterien Bewertungen

EASY Finder v.1.1ENG

5

1 Quick guide EASY Finder

1. PREPAIR SIM CARD

 Insert your SIM Card in a common

mobile phone

 Turn off the PIN code check  Switch the mobilebox off  Remove the SIM card from the mobile

phone

EASY Finder v.1.1ENG

6

2. MAKE YOUR EASY FINDER READY

 Insert the SIM

card from the top into the EASY Finder

 golden contacts

face inwards

 The chamfered

edge points to the upper left

 Fully charge the

EASY Finder's battery using the charger

EASY Finder v.1.1ENG

7

 Insert the fully charged battery into the

EASY Finder

3. START EASY FINDER

 Place the EASY finder in an uncovered

place, e.g. garden or terrace

 After inserting the battery, the EASY

Finder turns on automatically.

4. MEANING OF THE LED LIGHTS

LED lights

Meaning

flashes every 2-3 seconds

GSM signal available

flashes twice, short pause, flashes again 2x, short pause, etc.

GSM and GPS reception available

lights constantly

No signal available

EASY Finder v.1.1ENG

8

5. LOCATION QUERY

 Call Easy Finder  The call is automatically turned off  The EASY Finder sends an SMS to the

calling mobile phone

 The link in the SMS leads directly to the

location query in Google Maps

 If you do not have an internet-enabled

mobile phone, enter the coordinates manually via a PC or similar on Google Maps

For more detailed information, please read the

full instructions on the following pages.

The team of PAJ-GPS wishes you lots of

fun with your EASY Finder!

EASY Finder v.1.1ENG

9

Table of contents

1 Quick guide EASY Finder .......................................... 5

2 Scope of delivery ..................................................... 10

3 Grounds ................................................................... 11

4 Starting up ............................................................... 13

4.1 Deactivation of the PIN Code/Mailbox ..................... 13

4.2 Insertion of the SIM Card ........................................ 14

4.3 SD card compartment ............................................. 16

4.4 Loading ................................................................... 16

4.5 Launching the product for the first time.................... 16

5 Commands ............................................................... 19

5.1 Location request ..................................................... 19

5.2 No GPS Signal ........................................................ 22

5.3 IMEI check .............................................................. 24

5.4 Time adjustement.................................................... 24

5.5 Resetting to the factory defaults .............................. 26

5.6 Installation instructions for the KZF charger cable ... 27

5.7 The most important commands in the overview ....... 31

6 Frequently Asked Questions (FAQ) ........................ 32

7 Safety ....................................................................... 35

8 Notes for the disposal of waste batteries .............. 37

8.1 Free withdrawal of used batteries ............................ 37

8.2 Meaning of the battery icons ................................... 38

EASY Finder v.1.1ENG

10

2 Scope of delivery EASY Finder

 Two 3.7V 1000mAH Li-ion batteries  Charging cable  Charging cradle  Bag with holder for protection against splashing water  Second cover with inserted magnets  User Manual

We are constantly improving our products. Therefore, the contents of the manual may

change. The latest version can be found on our

website at:

www.paj-gps.de/downloads-anleitungen

EASY Finder v.1.1ENG

11

3 Grounds

Based on the GSM mobile network and the GPS satellites, this product can transmit its location via SMS or GPRS.

SIM cards with contract term can also be used. However, we recommend using a prepaid SIM card for the GPS tracker. Please do not use SIM cards that charge automatically as soon as they reach a specific account balance. This prevents you from incurring increased costs due to an incorrect setting.

EASY Finder v.1.1ENG

12

Recommended for the first start of the EASY

Finder are places that are not covered, such as

the garden or terrace (not in the apartment,

garage, cellar or similar). Please note that the

GSM signal is not supplied in some locations by

the respective network provider.

ATTENTION:

Please note that the commands are case-

sensitive. In addition, the quotes in the SMS are

not to be sent. These are only for the purpose

of the command.

EASY Finder v.1.1ENG

13

4 Starting up

4.1 DEACTIVATION OF THE PIN CODE/MAILBOX

(1.) Insert the SIM card into an ordinary mobile

phone and then deactivate the PIN code request of the SIM card. You usually have to do this under the menu item Settings or security settings of your mobile phone. A single input of the PIN code when switching on the mobile phone is not enough.

For a detailed description of how to disable the PIN code request, please refer to the manual of your mobile phone. Please also note that the PIN code query is not the screen number lock on your phone.

(2.) Turn off the mailbox to avoid any incurring

costs for the calling mobile phone. By most providers, the mailbox can be deactivated by calling "## 002 #".

EASY Finder v.1.1ENG

14

(3.) Please note that you can only receive a

confirmation from the EASY Finder when you are providing your call number with a call. Switch on the number transmission (also caller ID) of your mobile phone

4.2 INSERTION OF THE SIM CARD Insert the SIM card into the EASY Finder. The

contacts of the SIM card must face inwards. If the GPS Tracker is located in front of you as shown below, the chamfered edge of the SIM card (as shown) must be at the bottom left.

In order to insert the SIM Card deeply enough, please use a sharp object. Please ensure that the contacts are correctly positioned.

EASY Finder v.1.1ENG

15

 The SIM card must be in the standard size

 Insert the SIM card from the left side

(The contacts must face inwards and the oblique edge should be on the bottom left)

 Please ensure the correct position of the

SIM card

Nano

Standard

Mikro

EASY Finder v.1.1ENG

16

4.3 SD CARD COMPARTMENT This has no function in the EASY finder. The

EASY Finder has the same hardware as the GOLD Finder, but a different software.

4.4 LOADING

Before the first use, charge the battery for about eight to twelve hours. Please do not leave the battery completely empty and charge it in time. A longer lifetime of the batteries can be guaranteed only in this way.

4.5 LAUNCHING THE PRODUCT FOR THE FIRST

TIME

Make sure that the battery and the SIM card are correctly inserted.

The EASY Finder takes approximately 90 seconds to establish contact with the GPS and GSM signals for the first time. The LED light will begin to flash.

EASY Finder v.1.1ENG

17

LED lights

Meaning

flashes every 2-3 seconds

GSM signal available

flashes twice, short pause, flashes again 2x, short pause, etc.

GSM and GPS reception available

lights constantly

No signal available

If GSM and GPS signals are available, continue with point 5.

If the EASY finder does not receive a signal, first check the functionality of your SIM card. You should also change the location if the signal condition does not change after a long wait.

EASY Finder v.1.1ENG

18

For the first start of the EASY Finder, we

recommend places that are not covered, such

as the garden or terrace (not in the apartment,

garage, cellar or similar).

Please note that in some locations, there is not

enough GSM signal from the respective

network provider.

EASY Finder v.1.1ENG

19

5 Commands

Please note that all commands sent to the EASY Finder are written in lowercase. If you receive an error message, the command was not accepted. Please check the entries carefully and then repeat the procedure.

5.1 LOCATION REQUEST Call the EASY Finder by selecting the mobile

phone number of the SIM card, which you have already inserted as described in section 3.2. It answers the call and automatically ends the call. Subsequently, he sends an SMS to the caller in this format:

EASY Finder v.1.1ENG

20

Lat:50.798885

Latitude

lon:7.611802

Longitude

speed:0.24

Speed in which the EASY finder moves. Due to the rotation of the earth and the influence of the weather, small deviations are possible. In addition, this may cause the GPS tracker to stop and display a speed between 0-5 km / h. This is completely normal.

T:15/06/10 15:55

The date will be displayed in the English format (10th June 2005).

bat.100%

Battery Status

http://maps.google.com/ maps?f=q&q=50.798885 ,7.611802&z=16

Direct link to the search using Google Maps

EASY Finder v.1.1ENG

21

The geodata consist of latitude and longitude. Via the above link / GoogleMapsDisplay, you can directly have access to the current location of the device with an internetenabled smartphone.

Example of a Google Maps image

on the smartphone.

EASY Finder v.1.1ENG

22

If you do not have an SMS flat rate, SMS costs

can be charged.

5.2 NO GPS SIGNAL If your EASY finder has not received a GPS

signal yet and you call it for the location request, then this will send you the old coordinates as well as the mobile cell. With these data, you can go to the police in an emergency in order to carry out an evaluation. If the transmitted GPS data is

inaccurate, please call the EASY Finder again after 3 minutes. This makes the signal more precise.

EASY Finder v.1.1ENG

23

If you do not receive a GPS signal several

times, please check the location. This should

not be roofed. A suitable location would be, for

example, the garden or the terrace (not in the

apartment, garage, cellar or similar). Please

note that in some locations, there is insufficient

GSM signal from the respective network

provider.

SMS CONTENT

MEANING

Last:

Last coordinates

Lat:50.798885

Latitude

lon:7.611802

Longitude

http://maps.google.com/ma ps?f=q&q=50.798885,7.61 1802&z=16

Direct link to the search using Google Maps with the old coordinates

T: 15:55

Time

Now:

current

Lac:164 e60a

mobile cell

T:

Time is not specified here

Bat.100%

Battery status

EASY Finder v.1.1ENG

24

5.3 IMEI CHECK Send an SMS with the content

„imei123456“

to your EASY Finder to find the IMEI number. This is used to identify the device.

Example: imei123456

5.4 TIME ADJUSTEMENT Depending on where the EASY Finder is, it could

be in a different time zone. Send an SMS containing:

„time white space zone123456white space

time zone“

to set the appropriate / desired time.

EASY Finder v.1.1ENG

25

Example: time zone123456 1

The value of the time for Germany is "1" or "2"

during the summer time. On the homepage

www.zeitzonen.de you can find more

information about the timezone you are

currently in.

EASY Finder v.1.1ENG

26

5.5 RESETTING TO THE FACTORY DEFAULTS

Send an SMS with the following:

„begin123456“

to the EASY Finder. He responds with "begin ok" and resets to the factory setting. Now you

can start working again on the EASY Finder.

Example: „begin123456“.

EASY Finder v.1.1ENG

27

5.6 INSTALLATION INSTRUCTIONS FOR THE KZF

CHARGER CABLE 6-36V (OPTIONAL - NOT

INCLUDED IN THE STANDARD SCOPE OF DELIVERY)

We offer you the possibility to attach the EASY Finder to a car, motorbike, boat or scooter with a car charger cable (voltage converter). This eliminates the need to charge the EASY Finder's battery manually. The car charger cable is not included in the scope of delivery for the simple design of the EASY Finder, but can also be ordered directly at www.paj-gps.de or directly at our website.

To avoid damage to the vehicle or the EASY finder due to incorrect current, the car charger cable is equipped with a standard fuse. If it happens that this fuse blows once, then you can simply order a new one from us in the shop under the category Accessories.

The voltage converter is connected directly to the battery. Should you install the EASY Finder in connection with the voltage converter, for

EASY Finder v.1.1ENG

28

example, in the engine compartment of the car, we recommend the additional use of a small protective box. Please always observe the manufacturing requirements of your vehicle during installation. Claims for replacement due to incorrect connections are hereby excluded.

The fact that the EASY Finder is connected directly to the battery makes it possible to discharge the vehicle battery. In order to prevent this, please check whether your vehicle has a discharge protection and equip it if necessary.

EASY Finder v.1.1ENG

29

Installation:

Connect the voltage transformer to the battery (6-36V) using the cable clamps.

Cable terminals connected to the battery

EASY Finder v.1.1ENG

30

Important:

The red line with the fuse is plus (+).

The black line without the fuse is minus (-).

The poles must never be interchanged.

Otherwise, damages to the charger cable and

EASY finder may occur.

Ensure that the voltage transformer is not installed near fuel lines or other combustible objects in the engine compartment. We recommend the PAJ protection box for this.

Fasten the voltage transformer or the protective box so that no other components in the vehicle are damaged or disrupted.

EASY Finder v.1.1ENG

31

5.7 THE MOST IMPORTANT COMMANDS IN THE

OVERVIEW

FUNCTION

SMS INPUT

EXAMPLE

Factory setting

begin+Passwort

begin123456

IMEI check

imei+Passwort

imei123456

Time setting

time+Leerzeichen+ zone+Passwort+ white space + Zeitzone

timezone 1234561

Please note that the commands are case-

sensitive. If you receive an error message, the

command was not accepted. Please check your

entries carefully, then try again.

EASY Finder v.1.1ENG

32

6 Frequently Asked Questions (FAQ)

(1.) What to do if the LED is continuously lit?

 Change location  Check whether the PIN code request of the

SIM card has been drawn up before it is inserted into the EASY Finder

 Charge the EASY Finder directly over the

long term using the charging cable and then switch it on again

(2.) Why do I receive an error message via

SMS?

 Please note the uppercase and lowercase of

the letters for the commands. Also the plus signs (+) and the quotation marks ("") are not to be sent. If you receive an error message, the command was not accepted. Please check your entries carefully, then try again.

EASY Finder v.1.1ENG

33

(3.) How do I reset the EASY Finder to factory

setting?

 See point 5.6.

(4.) Do the quotes in the manual have to be sent

as well?

 No! This only serves to confine the

command.

(5.) Can the charging cable be connected

directly to the EASY Finder?

 Yes! The battery does not have to be

charged with the charging tray.

(6.) Why can not the EASY Finder be turned

off?

 While the EASY Finder is searching for a

GPS signal, it can not be turned off. If you want to switch the EASY Finder off, please remove the battery.

EASY Finder v.1.1ENG

34

(7.) Why does the LED light turn off after 5

minutes?

 If the EASY finder is not used for about five

minutes, the finder automatically switches to standby mode. This means that the LED light is no longer lit. The EASY Finder turns off the GPS signal, but keeps the GSM network upright. This process can save battery power. If you then call the EASY Finder or send an SMS, the EASY Finder will switch back on automatically. The LED light turns on and the EASY Finder will then search for a GPS signal.

(8.) What is the SD card slot?

 The SD card slot has no function with the

EASY Finder. The EASY Finder is based on the same hardware as the "GOLD Finder", but with a different software.

EASY Finder v.1.1ENG

35

7 Safety

Turning on

Do not switch on the unit if the use of GPS trackers is prohibited, it can cause interference or danger.

Interferences

In the case of mobile devices, malfunctions can result from interferences that can affect performance.

Turning off

Please note all bids and prohibitions and switch off the EASY Finder immediately in danger areas. Furthermore, it should not be used near medical devices, fuels and chemicals, as well as in explosive areas.

EASY Finder v.1.1ENG

36

Waterproof

The EASY Finder is not protected against moisture and water. Please use and store it only in a dry environment.

Qualified customer service

The repair and installation of the EASY Finder must only be carried out by qualified personnel.

Monitoring

It is punishable to monitor third parties without their consent by means of a GPS tracker.

EASY Finder v.1.1ENG

37

8 Notes for the disposal of waste batteries

The following note is intended for those who

use batteries or products with built-in batteries

and are no longer reselling them in their form

(end-users).

8.1 FREE WITHDRAWAL OF USED BATTERIES Batteries must not be disposed of via household

waste. You are legally obligated to return old batteries, so that a proper disposal can be ensured. You can dispose of old batteries at a local collection point or in the trade on the spot. As a distributor of batteries, we are also obligated for the withdrawal of old batteries, whereby our obligation only restricts to the type of waste batteries which we have led or managed as new batteries in our assortment.

Old batteries of the type mentioned above can therefore be returned to us by paying for a postage or delivered directly to our dispatch warehouse at the following address (free of charge):

EASY Finder v.1.1ENG

38

PAJ UG (haftungsbeschränkt)

Am Wieschen 1 51570 Windeck

Germany

E-Mail: info@paj-gps.de

8.2 MEANING OF THE BATTERY ICONS Batteries are marked with the symbol of a

crossed-out bin (see illustration below). This symbol indicates that batteries must not be disposed of with household waste. In the case of batteries containing more than 0.0005% by weight of mercury, more than 0.002% by weight of cadmium or more than 0.004% by weight of lead, the chemical name of the particular pollutant used is also underneath the refuse bin symbol. The abbreviation "Cd" means cadmium, "Pb" stands for lead, and mercury is abbreviated with "Hg"

Do you have questions?

Simply contact us, We are here to help you!

PAJ UG (haftungsbeschränkt) Wieschen 1 51570 Windeck Germany

Mail: info@paj-gps.de Phone: +49 (0) 2292 39 499 59 Web: www.paj-gps.de

Best regards, Your PAJ team

PAJ GPS EASY User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual