Paitec ES8000 Instruction Manual
Paitec Tabletop ES8000
Mid-Volume Pressure
Sealer and Folder
Instruction Manual
User Manual
ES8000
REV.01
User Manual ES8000
1
Contents
Introduction
Installation
Operation
Introduction
Specifications 3
Identifying
Parts 4
Installation
2
7
OP Panel 8
Paper Loading 9
Fold Type Setting 11
Understanding Folding
Mechanism 12
Functions
20
Error
Code 22
Trouble Shooting
Paper Jam 23
Others 24
Replacing In-Feed
Roller 25
Maintenance
Roller Cleaning 26
User Manual ES8000
2
Introduction
Welcome!
Introduction
Thank you very much for selecting a Paitec USA product!
This manual is prepared to provide you with guidelines on how to properly operate and
maintain the ES8000. Please read this user manual before operating in order to
prevent unexpected malfunction or damage. Please refer to the manual carefully and
follow the instruction.
Copyright 2014
Any of the contents should not be copied, re-printed or translated by other languages
without Paitec USA approval.
Safety Precautions
Caution: Serious bodily injury or mechanical damage may result from
insufficient attention to or incorrect compliance with warning
messages using this symbol.
● Do not attempt to disassemble or reorganize the machine. It may cause an electric
shock or mechanical problem.
● Quickly disconnect the power if liquid or a foreign object enter the inside of the
machine.
● Do not enter metal or inflammable material into AC Inlet.
● Please contact local dealer when you relocate the machine.
● This manual is subject to be revised without notice for product improvement.
● Do not install the machine on the place as below.
- Near window or places exposed to direct sunlight.
- Where vibration is detected.
- Sudden temperature changes or poorly ventilated areas.
- Places exposed to hot or cold air directly. (not office circumstance)
- Not solid enough or weak floor.
User Manual ES8000
3
Specifications
Introduction
Features
● ES8000 is a midrange level of pressure sealer. Speed processing up to 8,000
sheets per hour, perfect sealing quality with 2 ½” of pressure rollers, duty cycle
up to 150,000 sheets per month.
● Friction Reverse Rollers (FRR) Technology for papers separation. High Capacity
Top Feed Elevator Infeed Table. Snap-on Easy Feed Roller Replacement. Double
Feed Sensor Alert System.
Specifications
Specifications
er
Form Size
Paper Weight
Speed
Fold Setting
Fold Type
Double Feeding Detect
S
tack
D
uty
A4 / Legal / Letter
anual
month
20#-28#
Max 8,000 sheets per hour
M
Z, C, V, EZ
Optional: Vertical Stacker, Slide Conveyor
Available by DFD sensor
150,000 /
User Manual ES8000
4
Identifying Parts
Introduction
Main Body
①
④
②
③
① Feeding Unit Safety Cover
② Upper Fold Cassette Safety Cover
③ Lower Fold Cassette Door
④ OP Panel
⑤ Conveyor (optional)
⑤
User Manual ES8000
5
Identifying Parts
Introduction
Large Capacity Table
⑤
① Papers Support Hanger
②
④
② Feed Guide (Left)
③ Feed Guide (Right)
③
①
④ Locking Knob
⑤ In-feed Roller
Lower Cassette
①
④
②
Upper Cassette
③
① Lower Cassette
② Stopper
③ Stopper Adjustment Knob
④ Stopper Locking Knob
③
③
①
① Stopper Adjustment Knob
② Stopper Locking Knob
③ Fold Position Marker
User Manual ES8000
6
Identifying Parts
Introduction
Out-Feed Unit
①
④
②
⑤
① Power Switch
② Main Power Socket
③ Conveyor Power Socket
④ Press Roller Cover
⑤ Emergency Switch
③
User Manual ES8000
7
Installation
Installation Environment
1. Input power : 100~110V
2. Machine size(inches) : 24" x 18" x 16" (without conveyor)
3. Machine weight : 99Lbs
- Weight of a product is heavy, please use appropriate table for putting it on.
- Please use grounded power cable.
Installation
Unpacking
Please check if all of the following parts are included in the box.
- Main body, Power Cord, User’s Manual, V-Fold Guide and Jam Removal handle.
Removing Safety Tape and Styrofoam Location
Please remove all safety tapes and Styrofoam before operation.
Power Connection
Please refer to the label for electric information which is located at the back side
of the machine. When the power cable is properly connected, please switch the
machine on and check whether ‘Ready’ sign is appear on the display panel.
If not, please contact your local dealer for service.
User Manual ES8000
8
OP Panel
Operation
1. Start/Stop button: starts and stops the machine. If you press during setting, it returns to
the prior condition.
2. Set/Store button: sets and stores the selected function.
3. Mode button: enters to mode function.
4. Count button: enables you to set the number of forms that you wish to process and
have the machine stop automatically until you press the start button.
- Press the counter button and the light will blink.
- Change the displayed value by using select button and when ready, press the set button.
- When changing the value, press batch counter button to increase the value by 50 up to 500.
- This setting is not stored after rebooting the machine.
5. Select button: selects yes/no or increase/decrease numerical value when you set.
6. Count reset button: clears the count on the display panel.
7. Thickness Sensor button: protects the double or multiple feeding by sensing the
characteristics of paper.
8. Jam free button: automatic removal of paper jam at folding roller or press roller.
9. Auto start button: re-starts the process after selected time when the job reaches
preset count.
Loading...