PAG pagbelt Instruction Manual
Instruction Manual
Pagbelt
Ni-Cd Battery Belt
1. Integral charger/cut-out pocket.
2. Deep moulded one piece leather case.
3. Twin output sockets.
4. Quick release buckle.
5. Shoulder harness attaching rings.
6. Charging/mains LED (IC2 version only).
7. Waist strap.
8. Over discharge and thermal protection reset button.
9. Mains input socket (IC2 versions only).
3
5
5
7
5
1
3
8
4
9
4
6
2
Pagbelt IC2 & S2 - General Arrangement:
CONTENTS
SECTION PAGE
1 SPECIFICATION 2
2 CARE AND MAINTENANCE 4
3 INSTRUCTIONS FOR USE 5
4 SAFETY 7
5 WARRANTY 9
Pagbelt
Ni-Cd Battery Belt
Instruction Manual
2
SPECIFICATION
SECTION 1
1.1 Pagbelt Range:
Pagbelt IC2 incorporates an integral overnight charger. The model numbers of
the IC2 and S2 ranges are identifiable from the following table:
5Ah 7Ah 10Ah
12.0V S2 9187 9192
89197*
IC2 9287 9292
89297*
13.2V S2 9188 9193 89198*
IC2 9288 9293
89298*
14.4V S2 9189 9194 89199*
IC2 9289 9294
89299*
24.0V S2 9190* 39195*
IC2 9290*
39295*
30.0V S2 9191* 89196*
IC2 9291*
89296*
*Supplied with shoulder harness.
1.2 Cells:
Premium grade Nickel-Cadmium sealed rechargeable cylindrical cells.
1.3 Voltages:
Nominal voltage 1.2V per cell.
1.4 Capacity:
Capacities shown are as measured at the five hour rate.
1.5 Over Discharge Protection (ODP):
All models incorporate the PAG ODP circuit which will trip at the following
voltages:
Pagbelt Voltage: ODP Trip Voltage:
12.0V 8.5V - 9.5V
13.2V 9.5V - 10.5V
14.4V 10.5V - 11.5V
24.0V 17.0V - 19.0V
30.0V 22.0V - 24.0V
Loading...