PAG MPL50G User Manual

U5136G

Intelligent Linking Batteries

User Guide

PAG Ltd.

565 Kingston Road
London SW20 8SA
United Kingdom

E: [e-mail]
T: [phone]
www.paguk.com

Disclaimer

The information contained in this document is correct at the time
of publication. PAG Ltd. reserves the right to change
specifications or product details without notification. Changes to
product details will be incorporated in the next version of the
document. PAG updates documents on a regular basis.

Trademarks

All PAG registered trademarks are the property of PAG Ltd.
All third party trademarks are acknowledged as such.

Patents Apply: paguk.com/patents

Copyright © 2019 PAG Ltd. All rights reserved

Contents

Section Page

1 Introduction 4

2 Specification 5

3 Charging 6

4 Discharging 9

5 Storage 11

A User Guide for Mini PAGlink MPL50G Intelligent

Linking Batteries.

Please read the important safety information and

instructions before using your battery.

6 Battery Linking Features 12

7 Run-Time, Capacity & Data 14

8 Battery Outputs 16

9 Battery Protection Features 17

10 Safety Information 18

11 Servicing 19

12 Recycling 20

13 Guarantee 21

14 Air Transport 22

3

1. Introduction

1.1 Models covered by these instructions:

Model No. Name Capacity Mount

7141 MPL50 50Wh Gold Mount

1.2 The Mini PAGlink MPL50 Battery Model 7141 is designed to be

compatible with the Anton Bauer Gold Mount battery plate.

1.3 It features all the benefits of PAGlink intelligent linking technology

combined with a reduced form factor and increased durability.

Display

Display

Button

1/4” Bush

D-Tap Output

1/4” Bush

USB (2A)
Output
Unit

1.4 The 50Wh capacity is flight-friendly. Batteries can be linked to create

greater capacities on location, allowing you to travel with all the
power you need.

1.5 The unique PAGlink technology allows up to 8 batteries to be linked

for charge or discharge, regardless of their rated capacity or their
state-of-charge. The MPL50G can be linked with Gold Mount PL94
and PL150 batteries for charge or discharge.

1.6 The MPL50G has been designed as a single power source for smaller

4K camcorders and their accessories. In this application it replaces a
multitude of incompatible batteries. However, it can also be used to
power larger cameras and other production equipment, such as
monitors.

4

Battery Lock

& Release

Button

PAGlink

Contacts

MPL50G Front

1. Introduction

USB (2A)

Output

Unit

Output Unit

Release Slider

MPL50G Back

Main
Battery
Contacts

1.7 The MPL50G has a built-in D-Tap output (12V) and a replaceable USB

output unit (5V 2A) that can be swapped for Lemo, Hirose or D-Tap
output units, already available for the Gold Mount PowerHub.

1.8 The smaller, lighter batteries allow you to control the capacity and

weight of your power source to suit the application: 1 battery is ideal
for handheld applications, 2 or more linked batteries provide longer
run-time or an increased current draw, from 8A to 12A, ideal for
powering multiple accessories.

1.9 Current is delivered using superior, high-current pin contacts.

1.10 PAGlink allows seamless hot-swapping for continuous power, or the

ability to add another battery just to keep shooting, which means no
more time-wasting camera reboots.

1.11 Simultaneous discharge from linked batteries means no dead weight

on your camera. Sharing the current load extends overall battery life
to provide a better return on investment. MPL50 batteries are
guaranteed for 2 years.

1.12 The PAGlink technology will automatically select the most suitable

batteries for discharge, according to their charge status. Batteries do
not discharge into each other. The system ensures that the maximum
linked output is kept to a safe level.

1.13 The intelligent PAGlink batteries manage their own charging safely

and efficiently, and can be charged, whilst linked, using other

5

1. Introduction

reputable manufacturer’s Li-Ion chargers. The MPL50G is compatible
with PAGlink and Anton/Bauer chargers for maximum versatility and
economic integration.

1.14 Batteries in any state of charge can be linked for charging, in

multiples of 8 or fewer. During charging, the least-charged batteries
are given priority. When the batteries reach a similar state of charge,
they will charge simultaneously. The charge status of each battery is
shown on its individual display.

1.15 The MPL50G battery features an ergonomic design and a ‘soft-touch’

coated protective band for safer handling and increased durability.

1.16 Two 1/4” bush inserts have been incorporated to enable the

mounting accessories to individual or linked batteries.

1.17 The battery display provides remaining run-time, on-load, in 1 minute

increments, for the total of all linked batteries. It shows remaining
capacity for each individual battery in 1% increments, at any time. It
also provides useful data, such as the number of charge/discharge
cycles, to assist with battery management.

1.18 When linked, Mini PAGlink batteries form a network that allows them

to communicate with each other and report to the camera as one
battery.

1.19 The MPL50 will automatically detect and adapt to the camera data

system that allows Anton Bauer Gold Mount batteries to provide
capacity information in the camera viewfinder/LCD.

1.20 The battery’s fully-serviceable, modular construction allows

authorised replacement of the cell-pack whilst maintaining
conformity with UN standards.

1.21 The battery and charger firmware can be updated easily by the

customer, via external contacts, using an update tool provided by
PAG.

1.22 PAG’s patented intelligent battery linking technology remains far in

advance of any other camera battery system available today.

1.23 PAG Li-Ion batteries are tested by an independent authority to

UN standards in compliance with IATA Air Transport regulations.

Patents Apply: paguk.com/patents

6

2. Specification

2.1 Cell Technology:

Premium-grade Lithium-Ion sealed rechargeable cylindrical cells.

2.2 Capacity:

Model 7141:

50 Watt-hours (nominal 3.5 Ampere-hours).

2.3 Voltage:

14.8V nominal.

2.4 Output Current:

The rated maximum continuous output current for two or more linked
batteries is 12 Amperes (8 Amperes for individual batteries).

2.5 Fixed D-Tap Output:

12V (unregulated), designed for powering camera accessories.

2.6 Removable USB Output:

5V regulated, 2A continuous, 3A peak. Interchangeable with Hirose
(4-pin), Lemo (2-pin), D-Tap and 2.1mm DC output units available
individually from PAG or its resellers.

2.7 Temperature Range:

Charging:

0°C to +45°C Optimum +10 to +40°C
+32°F to +113°F Optimum +50°F to +104°F

Discharging:

-20°C to +50°C Optimum +10°C to +40°C

-4°F to +122°F Optimum +50°F to +104°F

Storage:

-10°C to +40°C Optimum 0°C to +20°C
+14°F to +104°F Optimum +32°F to +68°F

2.8 Overall Dimensions (L x W x H):

109mm (4.3”) x 87mm (3.4”) x 43mm (1.7”)

2.9 Weight:

360g (12.7oz) approx.

7