PACOM PDRH-440 User Manual
4-Channel Digital Video Recorder
i
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
COMPLIANCE NOTICE OF FCC:
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN
A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO
FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION
MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS
EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE, IN WHICH CASE
USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSING EQUIPMENT REGULATIONS.
The information in this manual is believed to be accurate as of the date of publication. We are not responsible for any
problems resulting from the use thereof. The information contained herein is subject to change without notice. Revisions
or new editions to this publication may be issued to incorporate such changes.
User’s Manual
ii
Important Safeguards
1. Read Instructions
All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future
reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not
use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the approval of
the manufacturer as such additions may result in the risk of fire, electric
shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Ventilation
Place this equipment only in an upright position. This equipment has an
open-frame Switching Mode Power Supply (SMPS), which can cause a
fire or electric shock if anything is inserted through the ventilation holes
on the side of the equipment.
7. Accessories
Do not place this equipment on an unstable cart, stand or table. The
equipment may fall, causing serious injury to a child or adult, and
serious damage to the equipment. Wall or shelf mounting should follow
the manufacturer's instructions, and should use a mounting kit approved
by the manufacturer.
This equipment and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the equipment
and cart combination to overturn.
8. Power Sources
This equipment should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power,
please consult your equipment dealer or local power company.
9. Power Cords
Operator or installer must remove power and TNT connections before
handling the equipment.
10. Lightning
For added protection for this equipment during a lightning storm, or when
it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent
damage to the equipment due to lightning and power-line surges.
11. Overloading
Do not overload wall outlets and extension cords as this can result in the
risk of fire or electric shock.
12. Objects and Liquids
Never push objects of any kind through openings of this equipment as they
may touch dangerous voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the equipment.
13. Servicing
Do not attempt to service this equipment yourself. Refer all servicing to
qualified service personnel.
14. Damage requiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have fallen into the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following the operating
instructions, adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician
to restore the equipment to its normal operation.
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance ─ this
indicates a need for service.
15. Replacement Parts
When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or that have the same
characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
16. Safety Check
Upon completion of any service or repairs to this equipment, ask the service
technician to perform safety checks to determine that the equipment is in
proper operating condition.
17. Field Installation
This installation should be made by a qualified service person and
should conform to all local codes.
18. Correct Batteries
Warning: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
19. Tmra
A manufacturer’s maximum recommended ambient temperature (Tmra)
for the equipment must be specified so that the customer and installer may
determine a suitable maximum operating environment for the equipment.
20. Elevated Operating Ambient Temperature
If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room ambient.
Therefore, consideration should be given to installing the equipment in an
environment compatible with the manufacturer’s maximum rated ambient
temperature (Tmra).
21. Reduced Air Flow
Installation of the equipment in the rack should be such that the amount
of airflow required for safe operation of the equipment is not compromised.
22. Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous
condition is not caused by uneven mechanical loading.
23. Circuit Overloading
Consideration should be given to connection of the equipment to supply
circuit and the effect that overloading of circuits might have on over current
protection and supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this concern.
24. Reliable Earthing (Grounding)
Reliable grounding of rack mounted equipment should be maintained.
Particular attention should be given to supply connections other than direct
connections to the branch circuit (e.g., use of power strips).
WEEE (Waste Electrical & Electronic Equipment)
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for
details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should
not be mixed with other commercial wastes for disposal.
4-Channel Digital Video Recorder
iii
Table of Contents
Chapter 1 ─ Introduction ............................................................................................................ 1
Features ................................................................................................................................. 1
Technical Overview ................................................................................................................ 1
Chapter 2 ─ Installation .............................................................................................................. 3
Package Contents .................................................................................................................. 3
Required Installation Tools .................................................................................................... 3
Video Input......................................................................................................................... 3
Video Loop Through .......................................................................................................... 3
Video Out ........................................................................................................................... 4
RS232 Port ........................................................................................................................ 4
Alarm Input/Output ............................................................................................................ 4
RS485 Port ........................................................................................................................ 4
Factory Reset Switch ......................................................................................................... 4
Network Port ...................................................................................................................... 5
Audio In/Out ....................................................................................................................... 5
Power Cord Connector ...................................................................................................... 5
Chapter 3 ─ Configuration.......................................................................................................... 7
Front Panel Controls .............................................................................................................. 7
POWER LED ..................................................................................................................... 7
HDD LED ........................................................................................................................... 7
ALARM LED ...................................................................................................................... 7
Arrow Buttons .................................................................................................................... 7
Enter/Pause Button ........................................................................................................... 8
Menu Button ...................................................................................................................... 8
PTZ/Zoom Button .............................................................................................................. 8
Panic Button ...................................................................................................................... 8
Playback Mode/Clip Copy Button ...................................................................................... 8
Camera Buttons (1 to 4) .................................................................................................... 8
USB Port ............................................................................................................................ 9
ID Button on Remote Control ............................................................................................ 9
Turning on the Power ............................................................................................................. 9
Initial Unit Setup ..................................................................................................................... 9
Setup Screen ....................................................................................................................... 10
System Setup ....................................................................................................................... 11
Information ....................................................................................................................... 11
Date/Time ........................................................................................................................ 12
Storage ............................................................................................................................ 13
User ................................................................................................................................. 15
Shutdown ......................................................................................................................... 16
Network Setup ..................................................................................................................... 16
Network ............................................................................................................................ 16
Notification ....................................................................................................................... 19
Devices Setup ...................................................................................................................... 21
Camera ............................................................................................................................ 21
Audio ................................................................................................................................ 22
Alarm-Out ........................................................................................................................ 22
User’s Manual
iv
Display ............................................................................................................................. 23
Remote Control ............................................................................................................... 24
Recording Setup .................................................................................................................. 25
Record ............................................................................................................................. 25
Schedule .......................................................................................................................... 26
Pre-Event ......................................................................................................................... 27
Event Setup ......................................................................................................................... 28
Alarm-In ........................................................................................................................... 28
Motion Detection .............................................................................................................. 29
Video Loss ....................................................................................................................... 31
Video Blind....................................................................................................................... 32
Text-In .............................................................................................................................. 33
System Event .................................................................................................................. 35
Event Status .................................................................................................................... 37
Chapter 4 ─ Operation ............................................................................................................. 39
Turning on the Power ........................................................................................................... 39
Live Monitoring ..................................................................................................................... 39
Live Monitoring Menu ...................................................................................................... 40
Zoom Mode...................................................................................................................... 41
Event Monitoring .............................................................................................................. 41
Covert Camera ................................................................................................................ 41
PTZ Mode ........................................................................................................................ 41
Using a Mouse ..................................................................................................................... 42
Recording Video .................................................................................................................. 43
Recording Audio .................................................................................................................. 44
Playing Recorded Video ...................................................................................................... 44
Searching Video ................................................................................................................... 44
Search Menu ................................................................................................................... 45
Event Log Search ............................................................................................................ 46
Record Table Search ....................................................................................................... 48
Motion Search ................................................................................................................. 49
Text-In Search ................................................................................................................. 50
Clip-Copy ......................................................................................................................... 51
Appendix .................................................................................................................................. 53
USB Hard Disk Drive Preparation ........................................................................................ 53
Preparing the USB hard disk drive in Windows 2000 ..................................................... 53
Preparing the USB hard disk drive in Windows 98.......................................................... 53
Text-In Search Examples..................................................................................................... 54
Search Example I ............................................................................................................ 54
Search Example II ........................................................................................................... 54
WebGuard ............................................................................................................................ 55
Web Monitoring Mode ..................................................................................................... 56
Web Search Mode ........................................................................................................... 57
Troubleshooting ................................................................................................................... 59
Connector Pin Outs .............................................................................................................. 59
I/O Connector Pin Outs ................................................................................................... 59
RS485 Connector Pin Outs ............................................................................................. 59
Map of Screens .................................................................................................................... 60
System Log Notices ............................................................................................................. 61
4-Channel Digital Video Recorder
v
Error Code Notices .............................................................................................................. 61
Specifications ....................................................................................................................... 62
List of Illustrations
Figure 1 ─ Typical DVR installation............................................................................................................ 2
Figure 2 ─ DVR rear panel. ........................................................................................................................ 3
Figure 3 ─ DVR front panel. ....................................................................................................................... 7
Figure 4 ─ Infrared Remote Control. .......................................................................................................... 9
Figure 5 ─ Login screen. .......................................................................................................................... 10
Figure 6 ─ Logout screen. ........................................................................................................................ 10
Figure 7 ─ Setup screen. ......................................................................................................................... 10
Figure 8 ─ System menu. ........................................................................................................................ 11
Figure 9 ─ Information screen. ................................................................................................................. 11
Figure 10 ─ Date/Time setup screen. ...................................................................................................... 12
Figure 11 ─ Holiday setup screen. ........................................................................................................... 13
Figure 12 ─ Time Sync. screen. ............................................................................................................... 13
Figure 13 ─ Storage Information screen. ................................................................................................. 14
Figure 14 ─ Storage Status setup screen. ............................................................................................... 14
Figure 15 ─ User setup screen. ............................................................................................................... 15
Figure 16 ─ Shutdown screen. ................................................................................................................. 16
Figure 17 ─ Network menu. ..................................................................................................................... 16
Figure 18 ─ Network setup screen. .......................................................................................................... 17
Figure 19 ─ LAN (Manual) setup screen. ................................................................................................. 17
Figure 20 ─ DVRNS setup screen. .......................................................................................................... 19
Figure 21 ─ WebGuard setup screen....................................................................................................... 19
Figure 22 ─ Notification Mail setup screen. .............................................................................................. 20
Figure 23 ─ Notification Callback setup screen. ...................................................................................... 20
Figure 24 ─ Devices menu. ...................................................................................................................... 21
Figure 25 ─ Camera setup screen. .......................................................................................................... 21
Figure 26 ─ Camera PTZ setup screen. .................................................................................................. 21
Figure 27 ─ Audio setup screen. .............................................................................................................. 22
Figure 28 ─ Alarm-Out Settings screen. .................................................................................................. 22
Figure 29 ─ Alarm-Out Schedule screen. ................................................................................................ 23
Figure 30 ─ Display OSD screen. ............................................................................................................ 23
Figure 31 ─ Main Monitor screen. ............................................................................................................ 24
Figure 32 ─ VGA screen. ......................................................................................................................... 24
Figure 33 ─ Remote Control setup screen. .............................................................................................. 25
Figure 34 ─ Record menu. ....................................................................................................................... 25
Figure 35 ─ Record setup screen. ........................................................................................................... 25
Figure 36 ─ Schedule setup screen. ........................................................................................................ 26
Figure 37 ─ Schedule – Settings (Advanced Mode) setup screen. .......................................................... 27
Figure 38 ─ Pre-Event setup screen. ....................................................................................................... 28
Figure 39 ─ Event menu. ......................................................................................................................... 28
Figure 40 ─ Alarm-In Settings screen. ..................................................................................................... 28
Figure 41 ─ Alarm-In Actions screen. ...................................................................................................... 29
Figure 42 ─ Motion Detection Settings screen. ........................................................................................ 29
Figure 43 ─ Motion Detection Actions screen .......................................................................................... 31
Figure 44 ─ Video Loss Settings screen. ................................................................................................. 31
Figure 45 ─ Video Loss Actions screen. .................................................................................................. 32
Figure 46 ─ Video Blind Settings screen. ................................................................................................. 32
Figure 47 ─ Video Blind Actions screen. .................................................................................................. 33
User’s Manual
vi
Figure 48 ─ Text-In Settings screen......................................................................................................... 33
Figure 49 ─ Text-In Device Settings screen. ............................................................................................ 34
Figure 50 ─ Text-In Actions screen. ......................................................................................................... 35
Figure 51 ─ Health Check screen. ........................................................................................................... 35
Figure 52 ─ Storage screen. .................................................................................................................... 36
Figure 53 ─ System Event Actions screen. .............................................................................................. 36
Figure 54 ─ Event Status screen. ............................................................................................................ 37
Figure 55 ─ Live Monitoring menu. .......................................................................................................... 39
Figure 56 ─ PTZ Select Camera menu. ................................................................................................... 41
Figure 57 ─ PTZ Preset screen. .............................................................................................................. 42
Figure 58 ─ Mouse Display menu. ........................................................................................................... 43
Figure 59 ─ Search menu. ....................................................................................................................... 45
Figure 60 ─ Event Log Search screen. .................................................................................................... 46
Figure 61 ─ Record Table Search screen. ............................................................................................... 48
Figure 62 ─ Motion Search screen. ......................................................................................................... 49
Figure 63 ─ Text-In Search screen. ......................................................................................................... 50
Figure 64 ─ Clip-Copy screen. ................................................................................................................. 51
4-Channel Digital Video Recorder
1
Chapter 1 ─ Introduction
Features
Your color digital video recorder (DVR) provides recording capabilities for four camera inputs. It provides exceptional
picture quality in both live and playback modes, and offers the following features:
4 Composite Video Input Connectors
Compatible with Color (NTSC or PAL) and B&W (CCIR and EIA-170) Video Sources
Auto Detection for NTSC and PAL
Monitor Connectors: 1 BNC Video Out, 1 VGA
H.264 Codec
Multiple Search Engines (Date/Time, Record Table, Event)
Records up to 120/100 Images per Second (NTSC/PAL)
“Loop-Through” Video Connectors
Continuous Recording in Disk Overwrite Mode
1 USB 2.0 Port
Continues Recording while Transmitting to Remote Site and during Playback
User-friendly Graphical User Interface (GUI) Menu System
Multiple Recording Modes (Time-lapse, Pre-event, Event and Panic)
Two-way Audio Communication
4-Channel Audio Recording and 1-Channel Audio Playback
Text Input for ATM and POS
Alarm Connections Include: Input, Output and Reset Input
Built-in Alarm Buzzer
Live or Recorded Video Access via Ethernet
Time Synchronization using industry standard protocol
Self-diagnostics with automatic notification including hard disk drive S.M.A.R.T. protocol
Infrared Remote Control
Technical Overview
In addition to replacing both a time-lapse VCR and a multiplexer in a security installation, your DVR has many features
that make it much more powerful and easier to use than even the most advanced VCR.
The DVR converts analog NTSC or PAL video to digital images and records them on a hard disk drive. Using a hard
disk drive allows you to access recorded video almost instantaneously; there is no need to rewind tape. The technology
also allows you to view recorded video while the DVR continues recording video.
Digitally recorded video has several advantages over analog video recorded on tape. There is no need to adjust tracking.
You can freeze frames, fast forward, fast reverse, slow forward and slow reverse without image streaking or tearing.
Digital video can be indexed by time or events, and you can instantly view video after selecting the time or event.
Your DVR can be set up for event or time-lapse recording. You can define times to record, and the schedule can change
for different days of the week and user defined holidays.
The DVR can be set up to alert you when the hard disk drive is full, or it can be set to record over the oldest video once
the disk is full.
Your DVR uses a proprietary encryption scheme making it nearly impossible to alter video.
You can view video and control your DVR remotely by connecting via Ethernet. There is a USB port that can be used
to upgrade the system or copy video clips to external hard disk, CD-RW and flash drives.
User’s Manual
2
Figure 1 ─ Typical DVR installation.
4-Channel Digital Video Recorder
3
Chapter 2 ─ Installation
Package Contents
The package contains the following:
Digital Video Recorder
Power Cord
User’s Manual (This Document)
RAS Software CD and User’s Manual
Infrared Remote Control
Required Installation Tools
No special tools are required to install the DVR. Refer to the installation manuals for the other items that make up
part of your system.
Figure 2 ─ DVR rear panel.
Video Input
Video Loop Through
Video Out
RS232 Port
Alarm Input/Output
RS485 Port
Factory Reset Switch
Network Port
Audio In/Out
Power Cord Connector
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL camera and an NTSC
monitor.
Video Input
Video Loop Through
NOTE: The Loop BNC connectors are auto terminated. Do NOT connect a cable to the Loop BNC unless it is
connected to a terminated device because it will cause poor quality video.
Connect the coaxial cables from the video sources to the BNC Video In connectors.
If you would like to connect your video source to another device, you can use the Loop
BNC connectors.
User’s Manual
4
Video Out
Connect the main monitor to the Video Out connector.
A VGA connector is provided so that you can use a standard, multi-sync computer monitor as your
main monitor. Use the cable supplied with your monitor to connect it to the DVR. The VGA monitor
is automatically detected when you connect it.
NOTE: The Video Out (BNC) and VGA connectors may be connected to individual monitors for simultaneous
operation.
RS232 Port
An RS232 port is provided to connect a remote control keyboard.
Alarm Input/Output
NOTE: To make connections on the Alarm Connector Strip, press and hold the button
and insert the wire in the hole below the button. After releasing the button, tug gently
on the wire to make certain it is connected. To disconnect a wire, press and hold the
button above the wire and pull out the wire.
AI 1 to 4 (Alarm-In): You can use external devices to signal the DVR to react to events. Mechanical or electrical
switches can be wired to the AI (Alarm-In) and G (Ground) connectors. The threshold voltage is 4.3V and should be
stable at least 0.5 seconds to be detected. See Chapter 3 ─ Configuration for configuring alarm input.
G (Ground): Connect the ground side of the Alarm input and/or alarm output to the G connector.
NOTE: All the connectors marked G are common.
NC/NO (Relay Alarm Output): The DVR can activate external devices such as buzzers or lights. Connect the device
to the C (Common) and NC (Normally Closed) or C and NO (Normally Open) connectors. NC/NO is a relay output
which sinks 2A@125VAC and 1A@30VDC. See Chapter 3 ─ Configuration for configuring alarm output.
ARI (Alarm Reset In): An external signal to the Alarm Reset In can be used to reset both the Alarm Out signal and
the DVR’s internal buzzer. Mechanical or electrical switches can be wired to the ARI (Alarm Reset In) and G (Ground)
connectors. The threshold voltage is below 0.3V and should be stable at least 0.5 seconds to be detected. Connect the
wires to the ARI (Alarm Reset In) and G (Ground) connectors.
RS485 Port
The DVR can be controlled remotely by an external device or control system, such as a control keyboard,
using RS485 half-duplex serial communications signals. The RS485 connector can also be used to control
PTZ (pan, tilt, zoom) cameras. Connect RX-/ TX- and RX+/TX+ of the control system to the – and +
(respectively) of the DVR. See Chapter 3 ─ Configuration and the PTZ camera or remote controller
manufacture’s manual for configuring the RS485 connection.
Factory Reset Switch
The DVR has a Factory Reset switch to the left of the Network port on the rear panel. This
switch will only be used on the rare occasions that you want to return all the settings to the original
factory settings.
CAUTION: When using the Factory Reset, you will lose any settings you have saved.
4-Channel Digital Video Recorder
5
To reset the unit, you will need a straightened paperclip:
1. Turn the DVR off.
2. Poke the straightened paperclip into the unlabeled hole to the left of the Network port, and turn the DVR on.
3. Hold the reset switch until the DVR turns on and live monitoring screen appears.
4. Release the reset switch. All of the DVR’s settings are now at the original settings it had when it left the factory.
Network Port
The DVR can be networked using the 10/100Mb Ethernet connector. Connect a Cat5 cable with an
RJ-45 jack to the DVR connector. The DVR can be networked with a computer for remote monitoring,
searching, configuration and software upgrades. See Chapter 3 ─ Configuration for configuring the
Ethernet connections.
CAUTION: The network connector is not designed to be connected directly with cable or wire
intended for outdoor use.
Audio In/Out
Your DVR can record audio from up to four sources. Connect the audio sources to Audio In
1, Audio In 2, Audio In 3 and Audio In 4 as needed using RCA jacks. Connect Audio Out
to your amplifier.
NOTE: It is the user’s responsibility to determine if local laws and regulations permit
recording audio.
NOTE: The DVR does not have amplified audio output, so you will need a speaker with an amplifier. The DVR
does not have a pre-amplifier for audio input, so the audio input should be from an amplified source, not directly
from a microphone.
Power Cord Connector
Connect the AC power cord to the DVR and then to a wall outlet.
WARNING: ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD. MAKE
CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE. DO NOT
INSTALL POWER CORDS UNDER RUGS OR CARPET.
THE POWER CORD HAS A GROUNDING PIN. IF YOUR POWER OUTLET DOES NOT HAVE A
GROUNDING PIN RECEPTACLE, DO NOT MODIFY THE PLUG. DO NOT OVERLOAD THE CIRCUIT
BY PLUGGING TOO MANY DEVICES IN TO ONE CIRCUIT.
Your DVR is now ready to operate. Refer to Chapter 3 ─ Configuration and Chapter 4 ─ Operation.
User’s Manual
6
4-Channel Digital Video Recorder
7
Chapter 3 ─ Configuration
NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2 ─ Installation.
Front Panel Controls
Figure 3 ─ DVR front panel.
Power LED
HDD LED
Alarm Out LED
Arrow Buttons
Enter/Pause Button
Menu Button
PTZ/Zoom Button
Panic Button
Playback Mode/Clip Copy Button
Camera Buttons
USB Connector
NOTE: A separate Alarm button is not provided. Pressing any button on the front panel or remote control resets
alarm output including the internal buzzer when the alarm is activated. However, when you are in the menu or
PTZ mode, you have to exit the menu or PTZ mode first to reset alarm output.
The front panel looks and operates much like a VCR combined with a multiplexer. Many of the buttons have multiple
functions. The buttons on the infrared remote control, while laid out differently, perform the same functions as those
on the front panel. The following describes each button and control. Take a few minutes to review the descriptions.
You will use these to initially set up your DVR and for daily operations.
NOTE: The infrared sensor is just to the right of the Menu button. Make certain that nothing blocks the sensor,
or the remote control will not function properly.
NOTE: You can also use a USB mouse (not supplied) to navigate through the screens and menus much like you
would on a computer.
POWER LED
The POWER LED is lit when the unit is On.
HDD LED
The HDD LED flickers when the DVR is recording or searching video on the hard disk drive.
ALARM LED
The ALARM LED is lit when alarm output or internal buzzer is activated.
Arrow Buttons
These buttons are used to navigate through menus and GUI. You can also use them to change numbers by highlighting
a number in the menu and using the Up and Down arrow buttons to increase or decrease the number’s value. These
buttons are also used to control Pan and Tilt when in the PTZ mode.
User’s Manual
8
In the playback mode, pressing the button plays video backward at high speed. Pressing the button again toggles
the playback speed from , and , and the screen displays , and
respectively. While
playing video, pressing the button plays video forward at high speed. Pressing the button again toggles the playback
speed from , , and , and the screen displays , , and
respectively. When in the pause
mode, pressing the
button moves to the next image and pressing the button moves to the previous image.
Enter/Pause Button
Pressing the
button selects a highlighted item or completes an entry that you have made during system setup.
In the live monitoring mode, pressing the
button freezes the current screen and the screen displays
icon. When
in the playback mode, pressing the
button pauses playing video.
Menu Button
Pressing the
Menu button enters the Setup screen. You will need to enter the authorized user and password to access
Setup. Pressing the button also closes the current menu or setup dialog box. In the Playback mode, pressing the button
displays the Search menu.
When in the live mode, pressing and holding the Menu button for three seconds or longer displays live channels
sequentially.
PTZ/Zoom Button
In the live monitoring mode, pressing the PTZ/Zoom button enters the zoom mode, and pressing the button again exits
the zoom mode. When in the zoom mode, a rectangle displays on the screen. A rectangle shows the area that will be
enlarged. You can move the rectangle around using the arrow buttons. Pressing the
(Enter) button enlarges the
area in rectangle.
In the live monitoring mode, pressing and holding the PTZ/Zoom button for three seconds or longer enters the PTZ
mode, and pressing and holding the button again for three seconds or longer exits the PTZ mode. When in the PTZ
mode, pressing the arrow buttons or Menu button allows you to control properly configured cameras.
Panic Button
Pressing the
Panic button starts panic recoding of all camera channels, and displays on the screen. Pressing the
button again will stop panic recording.
Playback Mode/Clip Copy Button
Pressing the Playback Mode/Clip Copy button enters the playback mode, and pressing the button again exits the playback
mode. When entering the playback mode, video is paused. Pressing the arrow button plays back video at regular
speed. The screen displays when the DVR is in the Pause mode and the screen displays when the DVR is playing
back video. The button is also used to load a Preset View in the PTZ mode.
Pressing and holding the Playback Mode/Clip Copy button for three seconds or longer allows you to copy video clips.
Camera Buttons (1 to 4)
Pressing the individual camera buttons will cause the selected camera to display full screen, and pressing the button
again changes the display format to the quad (2x2) mode. Buttons 1 to 4 are also used to enter passwords.
In the PTZ mode, pressing the button 1 zooms in the screen and the button 2 zooms out the screen, and pressing the
button 3 focuses near and button 4 focuses far.
4-Channel Digital Video Recorder
9
USB Port
A USB port on the front panel is provided to connect external hard disk, CD-RW or flash drives for video clip copying
or system upgrades. Position external drives close enough to the DVR so that you can make the cable connections,
usually less than 6 feet. Use the USB cable provided with the hard disk drive to connect it to the DVR.
A USB mouse (not supplied) can be connected to the USB port. You can use the mouse to navigate through the screens
and menus much like you would on a computer.
A USB to Serial converter can be connected to the USB port. Multiple text-in devices can be used with a USB to Serial
converter.
ID Button on Remote Control
NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit takes approximately 60 seconds to initialize.
Initial Unit Setup
Before using your DVR for the first time, you will want to establish the initial settings. This includes items such as
time and date, display language, camera, audio, remote control, record mode, network and password. Your DVR can
be set up using various screens and dialog boxes.
Throughout the screens you will see
. Highlighting the and pressing the (Enter) button gives you the opportunity
to reset that screen to its default settings. After you are finished with any setup screen, you can highlight Save and
press the
button to save the changes and exit the screen. If you do not wish to save the changes, highlight Cancel
and press the
button to exit the screen.
Press the
Menu button or move the mouse pointer to the top of the screen and then select (Login) in the Live
Monitoring menu to enter the setup screens. The Login screen appears.
Figure 4 ─ Infrared Remote Control.
If a DVR System ID is set to 0, the infrared remote control will control that DVR
without any additional operations. (Refer to the Information setup screen in this
chapter for further information on setting the System ID.) If the system ID is 1
to 4, you must to press the ID button on the remote control and then press the
number button (1 to 4) in order to control that DVR. If the System ID of two
or more DVRs is set to 0, those DVRs will react to the infrared remote control
at the same time.
User’s Manual
10
NOTE: To assure the secure management of the system, setting up a password is strongly recommended.
NOTE: If you cannot use the front panel buttons, click the button using the mouse to enter a password, and
the virtual keyboard displays. See instructions below for using the virtual keyboard.
NOTE: To log the user out of the system, press the Menu button on the front panel or move the mouse pointer
to the top of the screen and then select (Logout) in the Live Monitoring menu. The Logout screen displays
asking you to confirm whether or not you want to log out the current user.
Figure 6 ─ Logout screen.
Setup Screen
Figure 7 ─ Setup screen.
Press the Menu button on the front panel or move the mouse pointer to the top of the screen and then select (Setup)
in the Live Monitoring menu to enter the setup screen.
While setting up the DVR, there will be many opportunities to enter names and titles. When making these entries, a
Virtual Keyboard will appear.
Figure 5 ─ Login screen.
Select a User and enter the password by pressing the appropriate combination of
Camera number buttons and then the
button. There is no default password when
logging in the admin user for the first time.
Use the arrow keys to highlight the character you want in the name or title and press
the
button. That character appears in the title bar and the cursor moves to the next
position. Pressing
toggles between the upper and lower case keyboards,
backspaces, and
deletes entered characters. You can use up to 31 characters including
spaces in your title.
Special characters can be created using ^ and a capital letter; e.g. ^J for NL (New Line),
^M for CR (Carriage Return). Special characters are commonly used by text input
devices and will be useful when performing Text-In Searches.
4-Channel Digital Video Recorder
11
System Setup
Figure 8 ─ System menu.
Information
Highlight Information and press the button. The Information setup screen appears.
NOTE: The System ID number is used to identify the unit when it is connected with other DVRs through the
RS485 port. You cannot use the same ID number for two or more DVRs that are in the same RS485 network. It
is possible to have multiple DVRs with System ID 0 that are in the same area as long as they are not part of an
RS485 network. If this is the case, all will be controlled at the same time when using the infrared remote control.
Highlight the box beside Language and press button. A drop-down menu displays the available languages. Highlight
the desired language and press the
button.
The box beside Version displays the software version of the DVR.
To upgrade the software, connect a USB device containing the upgrade package file to the DVR. Highlight Upgrade…
and press the
button. The Upgrade screen appears.
CAUTION: The system restarts automatically after completing the upgrade, and it takes approximately
one minute to restart. Do NOT remove the USB device until the DVR restarts, otherwise the system
upgrade will not be completed properly.
CAUTION: The USB device must be FAT16 or FAT32 format.
Figure 9 ─ Information setup screen.
In the Information screen, you can name the site location,
assign a System ID number, select the language the screens
are displayed in, display software version number, upgrade
the software, show the System Log, display recorded time
data, and clear all data.
Highlight the Site box and press the button. A virtual
keyboard appears that you can use to enter a Site Name.
Once you have entered your title, highlight Close and press
the
button.
Highlight the box beside System ID and press the button.
Change the number by highlighting it and using the Up and
Down arrow buttons to increase and decrease the number from
0 to 99.
The screen displays the upgrade package file names that are available. The “.rui”
indicates that the file is for software upgrades. Select the desired file and press
the
button.
Highlighting the Install button and pressing the button will install the selected
software package. Highlighting the Cancel button and pressing the
button
will close the window without upgrading the software. If the upgrade package
file is not installed on the DVR properly, you will get an error message.
User’s Manual
12
NOTE: Even after changing the DVR settings by importing saved settings, the time-related settings (Date/Time,
Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB device must be FAT16 or FAT32 format.
Highlight Show System Log… and press the
button to display the System Log.
The box beside Recorded Data – From / To displays the time information of recorded data.
Highlighting Clear All Data… and pressing the button will clear all video data. You will be asked to verify that
you wish to clear all data before the DVR erases the video data. Clear All Data… will not clear the System Log.
Date/Time
Highlight Date/Time in the System menu and press the
button. The Date/Time setup screen appears.
You can import saved DVR settings or export the current DVR settings.
To import saved DVR settings, connect the USB device containing
the setup file (.dat) to the DVR. Highlight Setup – Import… and
press the button. Select the desired setup file and press the Import
button to import the selected settings and change the DVR settings
accordingly. Highlight Include Network Setup and press the
button to toggle between On and Off. When set to Off, the network
settings will not be changed.
To export the current DVR settings, connect the USB device to the
DVR. Highlight Setup – Export… and press the
button. Highlight
the box beside File name and press the
button. A virtual keyboard
allows you to enter the file name. Selecting Export will save the current
settings in .dat file format on the USB device.
The System Log screen lists system activities (up to 5,000 from
the latest) that have occurred along with the time and date. The
icon will be displayed in the last column for system activities
of the remote site. You can scroll through the log pages by
using the Up and Down arrows, or you can go directly to a log
page by entering the log page number in the box at the bottom
left of the screen. Highlight Close and press the
button to
exit the screen.
Figure 10 ─ Date/Time setup screen.
Highlight the first box beside Date and press the button.
The individual sections of the date will highlight. Use the Up
and Down arrow buttons to change the number. Use the Left
and Right arrow buttons to move between month, date and
year. Once you have the correct date, press the
button.
Highlight the Format box beside Date and press the button.
Select from the three available date formats and press the
button to save your selected format.
Highlight the first box beside Time and press the button.
The individual sections of the time will highlight. Use the Up
and Down arrow buttons to change the number. Use the Left
and Right arrow buttons to move between hour, minutes and
seconds. Once you have the correct time, press the
button.
4-Channel Digital Video Recorder
13
Highlight the Format box beside Time and press the
button. Select from the three available time formats and press
the
button to save your selected format.
NOTE: The clock will not start running until you have highlighted Save and pressed the button.
Highlight the box beside Time Zone and press the button. Select your time zone from the list and press the button.
Highlight Enable Daylight Saving Time and press the button. Pressing the button toggles between On and Off.
Highlight the Holiday tab, and the Holiday setup screen appears.
Highlighting the Time Sync. tab causes the Time Sync. setup screen to display. You can set up time synchronization
between the DVR and standard time servers that are available in most time zones and countries, or between the DVR
and another DVR.
Last Sync-Time displays the last time the DVR was synchronized with the time server.
Highlight Run as Server and press the button. Pressing the button toggles between On and Off. When it is
On, the DVR you are setting up will run as a time server.
Storage
Highlight Storage in the System menu and press the
button. The Storage setup screen appears and displays
information about the DVR’s storage devices.
Figure 11 ─ Holiday setup screen.
You can set up holidays by highlighting + and pressing the
button. The current date appears.
Highlight the month and day and change them by using the
Up and Down arrow buttons. Press the button to add the
date. Dates can be deleted by highlighting the
beside the
date and pressing the
button.
NOTE: Holidays that do not fall on the same date each
year should be updated once the current year’s holiday
has passed.
Figure 12 ─ Time Sync. setup screen.
Highlight the box beside Automatic Sync. and press the
button. This toggles between On and Off.
Highlight the box beside Time Server and press the button.
A virtual keyboard appears that you can use to enter the IP
address or domain name of the time server.
NOTE: You can use the domain name instead of IP address
if you already set up the DNS Server when setting up the
LAN.
Highlight the box beside Interval and press the button. Set
the time interval for synchronization from 30 minutes to 1 day
at various time intervals.
Loading...