PACOM PAC-171AV User Manual
Please read this manual thoroughly before use, and keep it handy for future reference
PAC-171AV
User’s Manual
TFT-LCD MONITOR
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these Instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles and the point where they exit from the apparatus.
11. Only use attachment/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer
or sold with the apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus the
apparatus has been exposed to rain or moisture does not
operate normally or has been dropped.
- The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases , shall be placed on the apparatus.
- Minimum distances (e.g. 10cm) around the apparatus for sufficient ventilation.
“WARNING - To reduce the risk of fire or electric shock, do not expose the
apparatus to rain or moisture.”
“The apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the apparatus.”
E
User manual
- 2 -
7. Water and Moisture : Do not use this monitor near water for
example, near a bathtub, wash bowl, kitchen sink or laundry tub, in
a wet basement or near a swimming pool and the like wet
basement or near a swimming pool and the like.
8. Accessories :
Do not place this monitor on an unstable cart,
stand, tripod, bracket or table. The monitor may fall, causing s
erious injury to a child or adult and serious damage to the
appliance. Use only with a cart, stand, tripod. bracket or table
recommended by AASSET, or sold with the monitor. Any
mounting of the monitor should follow AASSET’s instructions and
should use a mounting accessory recommended by Samsung.
9. Ventilation :
Slots and openings in the cabinet are provided for
Graphic Symbol Explanation ventilation and to ensure reliable operation of the monitor and to
The lightning flash with arrowhead symbol, protect it from overheating and these openings should never be
within an equilateral triangle, is intended to alert blocked by placing the monitor on a bed, sofa, rug or other similar
the user to the presence of uninsulated surface. This monitor should never be placed near or over a radia‘dangerous voltage’within the product’s tor or heat register. This monitor should not be placed in a built-in
enclosure that may be of sufficient magnitude installation such as a bookcase or rack unless proper ventilation is
to constitute a risk of electric shock to persons. provided or AASSET’s instructions have been adhered to.
The exclamation point within an equilateral
triangle is intended to alert the user to the 10. Power Sources :
This monitor should be operated only from the
presence of important operating and type of power source indicated on the making label. If you are not
maintenance (servicing) instructions in sure of the type of power supply to your installation site, consult
the literature accompanying the appliance. your Samsung dealer or local power company.
Warning - To Prevent Fire or Shock Hazard, 11. Grounding or Polarization :
For monitors equipped with a 3-wire
Do Not Expose This Monitor To grounding-type plug having a third(grounding) pin. This plug will
Rain or Moisture. only fit into a grounding type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
IMPORTANT SAFEGUARDS 12. Power :
Cord Protection-Power supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
-------------------------------------------------- upon or against them, paying particular attention to cords at plugs,
Caution
convenience receptacles, and the point where they exit from the
monitor.
Power source is indicated on the rear of the set. It contains
high-voltage parts. If you remove the cover, it may cause fire
13. Lightning : For added protection for this monitor during a
or electric shock. Do not remove the cover by yourself.
lightning storm or when it is left unattended and unused for long
(Control switches are at the front of the monitor.)
periods of time, unplug it from the wall outlet and disconnect the
-------------------------------------------------- cable system. This will prevent damage to the monitor due to
lightning and power-line surges.
1. Read Instructions :
All the safety and operating instructions 14. Overloading : Do not overload wall outlets and extension cords
should be read before the appliance is operated. as this can result in a risk of fire of electric shock.
2. Retain Instructions :
The safety and operating instructions should 15. Object and liquid Entry : Never push objects of any kind into
be retained for future reference. this monitor through openings as they may touch dangerous
3. Heed Warnings :
All warnings on the monitor and in the operating voltage points or short-out parts that could result in a fire or electric
instructions should be adhered to. shock. Never spill liquid of any kind on the monitor.
4. Follow Instructions : All operating and user instructions should be 16. Servicing :
Do not attempt to service this monitor yourself as
followed. opening or removing cover may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
5. Cleaning :
Unplug this monitor from the wall outlet before cleaning. personnel.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning. 17. Damage Requiring Service :
Unplug this monitor from the wall
Exception. Amonitor that is meant for uninterrupted service outlet and refer servicing to qualified service personnel under the
and that for some specific reason, such as the possibility of the following conditions.
loss of an authorization code for a CATV converter, is not a. When the power-supply cord or plug is damaged.
intended to be unplugged by the user for cleaning or any other b. If liquid has been spilled or objects have fallen into the monitor.
purpose may exclude the reference to unplugging the monitor c. If the monitor has been exposed to rain or water.
in the cleaning description otherwise required in Item 5. d. If the monitor does not operate normally by following the oper-
ating instructions. Adjust only those controls that are covered by
6. Attachments :
Do not use attachments not recommended by the operating instructions as an improper adjustment of other
AASSET as they may cause hazards. controls may result in damage and require extensive work by a
qualified technician to restore the monitor to its normal operation.
e. If the monitor has been dropped or the cabinet has been damaged.
f. When the monitor exhibits a distinct change in performance-this
indicates a need for service.
User manual
E
- 3 -
18.Replacement Parts : When replacement parts are required, radio/television technician for additional suggestions.
be sure the service technician has used replacement parts You may find the booklet called how to Identify and
specified by AASSET or have the same characteristics as Resolve Radio/TV Interference Problems helpful.
the original parts. This booklet was prepared by the Federal
Unauthorized substitutions may result in fire, electric shock or Communications Commission.
other hazards.
19. Safety Check : Upon completion of any service or repairs to
thismonitor, ask the service technician to preform safety
checks to determine that the monitor is in proper operating IC Compliance Notice
condition.
This Class (A) digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment Regulations.
NOTICE
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURYAND
This Class Adigital apparatus complies with Canadian
MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL
,
ICES-003.
STATE OR FEDERAL LAWS.
Warning
This is a class Aproduct. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Warning
This equipment has been tested and found to comply the
limits for a class Adigital device, pursuant to part 15 of
the FCC Rules and ICES-003 of Industry Canada.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generate, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will
be required to correct the interference at his own
expense.
User-Installer Caution
Your authority to operate this FCC verified equipment
could be voided if you make changes or modifications not
expressly approved by the party responsible for
expressly approved by the party responsible for
Information to user
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class Adigital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions : (1)
this device may not cause harmful interference and (2)
this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
User manual
E
- 4 -
Loading...