Pacific Image ST User manual

User’s Manual

ImageBox 9MP Standalone

UsersManual-WithTraslations-110316-01.indd 1 11-03-18 11:30 AM

User’s Manual

ENGLISH

PACKAGE CONTENT

» Scanner unit
» User’s manual
» USB 2.0 cable
» Printer cable
» A/C adapter (5V, 1A, DC)
» One lm strip holder
» One mounted slide holder

(Additional holders available for purchase)

SCANNER COMPONENTS

Front (diagram 1):

» Up/Down, Left/Right menu button
» SD/SDHC card slot
» Scan button
» Photo/Film selection switch
» Power status LED
» Film/Slide holder insertion slot

Back (diagram 2):

» DC power
» USB 2.0 port
» AV TV port

Film/Slide holder insertion slot

Power status LED

Scan button

Up/Down, Left/Right

SD card slot

Photo/Film selection switch

AV TV Port

USB 2.0 port

DC power

Front

Diagram 1

Back

Diagram 2

1

UsersManual-WithTraslations-110316-01.indd 1 11-03-18 11:30 AM

SETUP

1. Remove all tape used to hold items in place for shipping.

2. Place scanner unit on at surface.

3. Insert SD/SDHC media card (see diagram 1).

ENGLISH

SanDisk 2/4/8/16 GB

Transcend 2/4/16 GB

AD ATA 4/16 GB

Kingston 4 GB

Table 1 - Brands of SD memory

cards tested to be compatible

Menu mode icon

4. Connect power source (see diagram 2) - connect AC

SD/SDHC card

adapter to back of unit then plug into electrical outlet.

Note: Interface menu (see diagram 3) will display
“NO CARD” until functioning card is inserted.

5. The Menu Mode icon will be displayed in the top left

SD/SDHC card slot

side of the display (diagram 3).

Interface Menu

Diagram 3

2

UsersManual-WithTraslations-110316-01.indd 2 11-03-18 11:30 AM

SCANNING PHOTOS

1. Slide the switch on the front of the scanner to PHOTO

(diagram 4).

2. Lift scanner lid, place photo face down on scanner glass.

Do not remove white lm scanner cover.

3. Position photo towards the arrow on the bottom right of scanning

area.

4. Close scanner lid.

5. Enter the Image Size:

a. Press OK to display scanning options menu icons

(diagram 4).

b. Press the right arrow once to choose image size settings.
c. Press the Up/Down arrows to highlight the desired size,

press OK. The preview display will indicate the area of the
photo that will be scanned with a yellow frame based on the
select size.

6. Press Scan button (diagram 4), green LED will ash and “CAPTURING”

will be displayed on the preview screen.

Scanning of the photo is now complete.

Green LED

OK button

Switch to
PHOTO

Scan button

Open scanner lid

Diagram 4

ENGLISH

3

UsersManual-WithTraslations-110316-01.indd 3 11-03-18 11:30 AM

OPTIONS FOR SCANNING PHOTOS

The following options are available in the photo scanning process:

ENGLISH

» Scan: Switch between scanning and previewing images in card mode.
» Photo (size): Select photo size, 4x6, 3x5, etc.
» Brightness: Adjust nal brightness to be lighter or darker.
» Magic Touch: ~ for scanning lm only ~
» Setup: Hardware settings - LCD display, Display (TV) settings (NTSC = USA, PAL = Other countries), Quality,

Size, Quick view, Interval (slide show), Slide show effect, Power save (duration), Language, Format, Reset
(to default settings).

Note: Press any button if the scanner is in power save mode (green LED ashing, preview screen off).

4

UsersManual-WithTraslations-110316-01.indd 4 11-03-18 11:30 AM