Pacific Zuma Leg Press Option Assembly Manual
Assembly Instructions
Zuma Leg Press Option
Zuma Leg Press Option Assembly Instructions
page 2
IMPORTANT SAFETY INSTRUCTIONS
Important Safety Instructions
Important Safety Instructions
Before beginning any fitness program, you should
obtain a complete physical examination from your
physician.
Il est conseillé de subir un examen médical complet
avant d’entreprendre tout programme d’exercise. Si
vous avez des étourdissements ou des faiblesses,
arrêtez les exercices immédiatement.
When using exercise equipment, basic precautions
should always be taken, including the following:
• Read all instructions before using the Leg Press
Option. These instructions are written to ensure your
safety and to protect the unit.
• Do not allow children on or near the equipment.
• Use the equipment only for its intended purpose as
described in this guide. Do not use accessory
attachments that are not recommended by the
manufacturer: such attachments might cause
injuries.
• Wear proper exercise clothing and shoes for your
workout—no loose clothing.
• Use care when getting on or off the unit.
• Do not overexer t yourself or work to
exhaustion.
• If you feel any pain or abnormal symptoms, stop
your workout immediately and consult your
physician.
• Never operate the unit after it has been dropped or
damaged. Return the equipment to a service center
for examination and repair.
• Never drop or insert objects into any opening in the
equipment. Keep hands away from moving parts.
• Always check the unit and its cables before using it.
Make sure that all fasteners and cables are secure
and in good working condition.
• Do not use the equipment outdoors.
Personal Safety During Assembly
• It is strongly recommended that a qualified dealer
assemble the equipment.
Assistance is required.
• Read each step in the assembly instructions and
follow the steps in sequence. Do not skip ahead. If
you skip ahead, you may learn later that you have
to disassemble components and that you may have
damaged the equipment.
• Assemble and operate the Leg Press Option on a
solid, level surface. Locate the unit a few feet from
walls or furniture to provide easy access.
The Leg Press Option is designed for your enjoyment. By
following these precautions and using common sense,
you will have many safe and pleasurable hours of healthful
exercise with your Precor Strength-Training equipment.
Obtaining Service
Do not attempt to service the Leg Press
Option yourself. This unit does not contain
any user-serviceable parts.
For information about product operation
or service, check out the Precor web site
at www.precor.com or contact an
authorized Precor dealer or a Precor
factory authorized service company. To locate
the dealer or service person nearest you, call
1-800-4-PRECOR.
If you call or e-mail Customer Service, have
your serial and par t numbers available.
The serial number is printed on a label on
the side of the Leg Press Option. For future
reference, write the serial number below.
Serial number: _____________
Zuma Leg Press Option Assembly Instructions
page 3
Table of Contents
Table of Contents
Important Safety Instructions ....................................................................... 2
Personal Safety During Assembly............................................................................................ 2
Obtaining Service .................................................................................................................... 2
Before You Begin ........................................................................................... 4
Unpacking the Equipment ........................................................................................................ 4
Preparations................................................................................................... 5
Required Tools ......................................................................................................................... 5
Installation Requirements ........................................................................................................ 5
Assembly Tips ......................................................................................................................... 5
Assembly Instructions .................................................................................. 6
1. Attach the Leg Press to the Zuma ........................................................................................ 7
2. Attach the Seat Frame to the Leg Press ............................................................................... 8
3. Assemble the Seat Pads ...................................................................................................... 9
4. Assemble the Pulleys ........................................................................................................... 10
5. Route the Cable ................................................................................................................... 12
Cable Adjustments ........................................................................................13
1. Press Arm Adjustment .........................................................................................................14
2. Support Arm Adjustment ...................................................................................................... 15
Warranty Card ................................................................................. Back cover
Specifications ................................................................................. Back cover
1
2
3
4
Zuma Leg Press Option Assembly Instructions
page 4
1
Before You Begin
Before You Begin
Thank you for purchasing the Leg Press Option for the
Zuma. This option will add a new dimension to your
strength-training regimen. For proper installation, please
read this guide thoroughly and follow the assembly
instructions.
Unpacking the Equipment
The Leg Press Option is carefully tested and inspected
before shipment. The unit is shipped in one box and has
several pieces that require assembly. Two people are
required to assemble this equipment. Ask for assistance
during the assembly process.
• Review the
Installation Requirements
on the next
page.
• Carefully unpack the pieces and lay them on the
floor near the place where you plan to use the
equipment.
If any items are missing, contact the dealer from whom
you purchased the unit.
Zuma Leg Press Option Assembly Instructions
page 5
2
Preparations
Preparations
Bolt head
Bolt threads
Shank
To determine the
length of a bolt,
measure its shank.
CAUTION: To set up this equipment, you will need
assistance. Do not attempt assembly by yourself.
You must review and follow the instructions in this
guide. If you do not assemble and use the Leg Press
Option according to the following guidelines, you could
void the Pacific Fitness limited warranty.
Required Tools
You need to obtain these tools before assembling the
unit:
❑ 3/4-inch socket wrench
❑ 3/4-inch box-end wrench
❑ 9/16-inch socket wrench
❑ 9/16-inch box-end wrench
❑ Two adjustable pliers or crescent wrenches
❑ Standard set of metric Allen wrenches
❑ Utility knife or scissors
❑ Measuring tape
Installation Requirements
Follow these installation requirements when
assembling the unit:
• Fill out and mail the limited warranty card. The
warranty card is found on the back cover of this
guide.
• Set up the Leg Press Option on a solid, flat
surface. A smooth, flat surface under the unit helps
keep it level. A level unit has fewer malfunctions.
• Provide ample space around the machine. Open
space around the machine allows for easier
access.
• Insert all bolts in the same direction. Fo r
aesthetic purposes, insert all the bolts in the same
direction unless specified (in text or illustrations) to
do otherwise.
• Leave room for adjustments. Tighten
fasteners (such as bolts, nuts, and screws)
so that the unit is stable, but leave room for
adjustments. Do not fully tighten fasteners
until instructed in the assembly steps to do so.
Assembly Tips
• A black, 6-inch scale with white numbers is provided
at the bottom of every assembly instruction page.
Use this scale to identify the correct size for bolts
and spacers. The head of a bolt is not used to
measure the length of a bolt.
To find the length of a par ticular bolt, measure its
shank (the long, narrow part beneath the head). Refer
to the following diagram.
• Read all caution notes on each page before
completing that step.
• Some pieces have extra holes that you will not use.
Use only those holes indicated in the instructions
and illustrations.
• While you may be able to assemble the Leg Press
Option by using the illustrations only, refer to the
text for important safety cautions and notes.
Zuma Leg Press Option Assembly Instructions
page 6
1 2 3 4 5 6
3
Assembly
Instructions
Assembly Instructions
Assembly of the Leg Press Option takes professional
installers about 1 hour to complete. If this is the first time
you have assembled this type of equipment, plan on
significantly more time.
Professional installers are highly recommended!
CAUTION: Obtain assistance! Do not attempt to
assemble the Leg Press Option by yourself.
Because of the weight and size of the equipment,
you could be injured or damage the equipment.
Important: For ease of assembly, the fasteners and
hardware for each step are labeled and packaged in
separate bags. Be careful to assemble the
components in the sequence presented in this
guide.
Loading...