Pacer ET057007DMU Technical data

EXAMINED BY :
APPROVED BY
:
C
USTOMER
FILE NO
. CAS-51607
EMERGING DISPLAY
: MAY.24, 2007
TECHNOLOGIES CORPORATION
TOTAL PAGE
VERSION
: 1
: 22
A
CCEPTANCE
S
PECIFICATIONS
MODEL NO. :
E T 0 5 7 0 0 7 D M U
(RoHS)
FOR MESSRS :
CUSTOMER'S APPROVAL
:
DATE
_____________________________
:
BY
_____________________________
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
R E C O R D S OF R E V I S I O N
D A T E
REVISED
PAGE
NO.
MODEL NO.
E T 0 5 7 0 0 7 D M U (RoHS)
DOC . FIRST ISSUE
S U M M A R Y
VERSION PAGE
1 0-1
MAY.24, 2007
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
MODEL NO.
E T 0 5 7 0 0 7 D M U (RoHS)
VERSION PAGE
1 0-2
T A B L E O F C O N T E N T S
NO. I T E M PAGE ===============================================================
1.
2. MECHANICAL SPECIFICATIONS
3.
4.
5.
6.
7.
8. BLOCK DIAGRAM
9. DETAIL DRAWING OF DOT MATRIX
10. INTERFACE SIGNAL
11. POWER SUPPLY
12. INSPECTION CRITERION
GENERAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
TIMING CHART
OPTICAL CHARACTERISTICS
OUTLINE DIMENSIONS
------------------------------------------------------
--------------------------------------------
---------------------------------------------
-------------------------------------------------------
-------------------------------------------------
-------------------------------------------------------
----------------------------------------------
---------------------------------------
-------------------------------------
-------------------------------------
---------------------------------------
---------------------------------
1
1
2
3
4
5 , 6
7
8
9
10 , 11
12
13 ~ 22
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
MODEL NO.
E T 0 5 7 0 0 7 D M U (RoHS)
1. GENERAL SPECIFICATIONS
1 . 1 APPLICATION NOTES FOR CONTROLLER/DRIVER PLEASE REFER TO :
H I M A X H X 8 2 5 0 H I M A X H X 8 6 7 8
1 . 2 MATERIAL SAFETY DESCRIPTION
ASSEMBLIES SHALL COMPLY WITH EUROPEAN ROHS REQUIREMENTS, INCLUDING PROHIBITED MATERIALS/COMPONENTS CONTAINING LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS (PBB) AND POLYBROMINATED DIPHENYL ETHERS (PBDE)
2.
( 1 ) DISPLAY SIZE (inch)
( 2 ) NUMBER OF DOTS
( 3 ) MODULE SIZE
MECHANICAL SPECIFICATIONS
----------------------------------
-------------------------
--------------------------
5.7”
640W * (RGB) * 480H DOTS
147.6W * 100.0H *10.5D mm
(WITHOUT FPC)
VERSION PAGE
1 1
( 4 ) EFFECTIVE AREA
( 5 ) ACTIVE AREA
( 6 ) DOT SIZE
( 7 ) PIXEL SIZE
( 8 ) LCD TYPE
( 9 ) COLOR
( 10 ) VIEWING DIRECTION
( 11 ) BACK LIGHT
---------------------------------
-------------------------------------
-------------------------------------
-----------------------------------
--------------------------------------
----------------------------------
-----------------------------
-----------------------
117.2W * 88.4H mm
115.2W * 86.4H mm (LCD)
0.06W * 0.18H mm
0.18W * 0.18H mm
TFT , TRANSMISSIVE
16.7M (24BIT)
12 O’CLOCK
LED , COLOR : WHITE
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
MODEL NO.
E T 0 5 7 0 0 7 D M U (RoHS)
VERSION PAGE
1 2
3 . ABSOLUTE MAXIMUM RATINGS
3 . 1 ELECTRICAL ABSOLUTE MAXIMUM RATINGS .
POWER VOLTAGE VCC -0.3 7.0 V VSS=0
INPUT VOLTAGE Vin - 0.3 VCC+0.3 V
POWER DISSIPATION PD
FORWARD CURRENT IF
REVERSE VOLTAGE VR
PARAMETER SYMBOL MIN. MAX. UNIT REMARK
  
1.28 W
0.06 A
45 V
3 . 2 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS .
OPERATING STORAGE
AMBIENT TEMPERATURE
HUMIDITY NOTE ( 3 ) NOTE ( 3 )
VIBRATION
SHOCK
CORROSIVE GAS NOT ACCEPTABLE NOT ACCEPTABLE
NOTE ( 1 ) : Ta AT -30°C : 48HR MAX .
NOTE ( 2 ) : BACKGROUND COLOR CHANGES SLIGHTLY DEPENDING ON AMBIENT TEMPERATURE
THIS PHENOMENON IS REVERSIBLE.
NOTE ( 3 ) : Ta ≤ 60°C : 90%RH MAX (96HRS MAX).
Ta > 60°C : ABSOLUTE HUMIDITY MUST BE LOWER THAN THE HUMIDITY
I T E M
MIN. MAX. MIN. MAX.
- 2 0 °C 7 0
C - 3 0 °C 8 0
°
2.45 m/s
2
( 0.25 G)
29.4 m/s
2
( 3 G)
80°C : 168HR MAX .
OF 90%RH AT 60°C(96HRS MAX).
C
°
11.76 m/s
( 1.2 G )
490 m/s
( 5 0 G )
REMARK
NOTE ( 1 ) , ( 2 )
WITHOUT
CONDENSATION
5~20Hz , 1HR
2
20~500Hz(20Hz) , 1HR 20~500Hz(500Hz) , 1HR
X,Y,Z,TOTAL 3HR
10 m SECONDS
2
XYZ
DIRECTIONS
1 TIME EACH
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
4 . ELECTRICAL CHARACTERISTICS
PARAMETER SYMBOL CONDITION MIN. TYP. MAX. UNIT REMARK
MODEL NO.
E T 0 5 7 0 0 7 D M U (RoHS)
VERSION PAGE
1 3
Ta = 25 °C
POWER SUPPLY VCC
POWER SUPPLY
CURRENT FOR LCM
LOW LEVEL INPUT
VOLTAGE
HIGH LEVEL INPUT
VOLTAGE
OUTPUT LOW VOLTAGE VOL
OUTPUT HIGH VOLTAGE VOH
FRAME FREQUENCY fFRAME
FORWARD VOLTAGE VF I
LED LIFE TIME
ICC
VIL
VIH
VCC = 3.3V
LED B/L = ON
IOL = 400µA
IOH = 400µA
=40mA 28 30 32 V
F
2.7 3.3 3.6 V
510 600 mA
0
0.7*VCC
0
0.8*VCC
30000 40000
0.3*VCC V
VCC V
0.2*VCC V
VCC V
60 90 Hz
hr
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
MODEL NO.
E T 0 5 7 0 0 7 D M U (RoHS)
5 . TIMING CHART
VERSION PAGE
1 4
5.1 DIGITAL PARALLEL RGB INTERFACE
SIGNAL ITEM SYMBOL MIN. TYP. MAX. UNIT
DCLK
DATA
HSYNC
VSYNC
FREQUENCY TCLK
HIGH TIME PULSE DUTY TCWH 40 50 60 %
SETUP TIME TDSU 10
HOLD TIME TDHD 10
PERIOD TH
PULSE WIDTH TWH 5 30
BACK-PORCH THB
DISPLAY PERIOD THD
PERIOD TV
PULSE WIDTH TWV 1 3 5 TH
  
25.175
 
800
144 175 DCLK
640
525
   
 
MHz
DCLK
DCLK
DCLK
TH
ns
ns
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
6 . OPTICAL CHARACTERISTICS
6.1 OPTICAL CHARACTERISTICS
VIEWING ANGLE
CONTRAST RATIO CR
t r ( rise )
RESPONSE TIME
THE BRIGHTNESS
OF MODULE
x 0.26 0.31 0.36
x 0.56 0.61 0.66
COLOR OF
CIE
x 0.28 0.33 0.38
COORDINATE
x 0.09 0.14 0.19
THE UNIFORMITY OF
MODULE
I T E M SYMBOL CONDITION MIN. TYP. MAX. UNIT REMARK
θ
y+
θ
y-
θ
x+
θ
x-
t f ( fall )
B
WHITE
RED
GREEN
BLUE
y 0.30 0.35 0.40
y 0.31 0.36 0.41
y 0.51 0.56 0.61
y
MODEL NO
E T 0 5 7 0 0 7 D M U (RoHS)
=0°
θ
x
CR ≥ 10
=0°
θ
y
x=0° , θy=0°
θ
x=0° , θy=0°
θ
x=0° , θy=0°
θ
IF = 40mA
x=0° , θy=0°
θ
IF = 40mA
NTSC : 50 %
.
50 55
47 52
60 65
60 65
300 350
15 30
35 50
400 450
0.07 0.12 0.17
75 80
VERSION PAGE
1 5
Ta = 25 ± 2 °C
 
d e g .
  
msec (4)
cd/m
2
%
(2) (3)
(3)
(5)
NOTE (1) : TEST EQUIPMENT SETUP : AFTER STABILIZING AND LEAVING THE PANEL ALONE AT A GIVEN TEMPERATURE FOR 30 MINUTES , THE MEASUREMENT SHOULD BE EXECUTED. MEASUREMENT SHOULD BE EXECUTED IN A STABLE , WINDLESS , AND DARK ROOM. OPTICAL SPECIFICATIONS ARE MEASURED BY TOPCON BM-7 (FAST) WITH A VIEWING ANGLE OF 2° AT A DISTANCE OF 50cm AND NORMAL DIRECTION.
7)
02101300-01-02
Loading...
+ 17 hidden pages