Pace-Edwards 2004 Ford Flareside Clamp Supplement User Manual

2004 - Current

FORD FLARESIDE

RAIL & CLAMP SUPPLEMENT INSTRUCTIONS

LEVELING THE RAILS:

1. To level the rails it is necessary to add a shim
between the rail and the front bed sill. (Figure 1)

Figure 1

To level the rail, add a
shim between the rail and
the front bed sill.

INSTALLING THE RAIL CLAMPS:

1. Looking at the underside of the rail and truck bed rail, locate the factory open slot in the truck bed rail.

2. Install the clamps through these slots in the truck bed. (Figure 2)

3. Hold the rail down and the clamp up while tightening the bolts in the clamps. Do Not Over Tighten.

(Figure 3)

Figure 2 Figure 3

THROUGH SLOT
IN TRUCK

TRUCK BED

BOLT

FLAT WASHER

OUTER RAIL
CLAMP

INNER RAIL
CLAMP

FLAT WASHER

LOCK WASHER

NUT

COMPLETED ASSEMBL Y

Be sure to hold the rail down and the clamp
up while tightening the bolts in the clamps.

This will insure a snug fi r to the Truck bed.

Do Not Over Tighten the Clamps

.

If you have any questions please call our technical
support at:

800-338-3697

04- Current Ford Flareside Rail & Clamp Supplement 056