PAC Audio APH-FD02 Installation Guide
Speaker connection harness for select 2018-2019 Ford
Purple/Black
1
Pink
CAN +
11
Pink/Black
CAN -
2
Orange
Not Used
12
Orange
Not Used
3
Orange
Not Used
13
Orange
Not Used
4
Brown / Black
Center Channel -
14
Brown
Center Channel +
5
Blue / Black
Subwoofer 1 -
15
Blue
Subwoofer 1 +
6
Gray / Black
Right Front Speaker -
16
Gray
Right Front Speaker +
7
White / Black
Left Front Speaker -
17
White
Left Front Speaker +
8
Purple / Black
Right Rear Speaker -
18
Purple
Right Rear Speaker +
9
Red / Black
Subwoofer 2 -
19
Red
Subwoofer 2 +
10
Green / Black
Left Rear Speaker -
20
Green
Left Rear Speaker +
APH-FD02
vehicles with factory amplied B&O sound systems
Introduction and Features
The APH-FD02 simplies speaker wire connections when adding an aftermarket radio or amplier . Aftermarket equipment
can be easily added with no need to cut or modify a vehicle’s original wiring.
Installation Notes
1. It is always best to use a tone generator (PAC Part# TL-PTG2) to verify that the tables in this manual, and the labels on the
wires, match the wiring in your specic vehicle.
2. If you are installing an aftermarket amplier, and would like to leave any of the factory speakers connected to the factory
amplier, simply connect the speaker wires (color for color) between the male and female connectors. For example: If you
want the rear speakers to be powered by the factory amplier, simply connect the Green, Green / Black, Purple and Purple /
Black wires from the male connector to the Green, Green / Black, Purple and Purple / Black wires from the female connector.
Installation Steps
1. Locate the vehicle factory amplier and disconnect the Gray 20-pin connector.
2. Connect the APH-FD02 harness to the connector that was disconnected in the previous step.
3. Connect the male connector from the APH-FD02 to the amplier.
4. Connect the longer loose wires from the APH-FD02 to your aftermarket amplier or passive crossovers according to the
tables in this manual.
Wiring Overview
For Future Use
Green/Black
Red/Black
Purple/Black
White/Black
Gray/Black
Blue/Black
Brown/Black
Orange
Orange
Pink
20
10
1
Green
Red
Purple
White
Gray
Blue
Brown
Orange
Orange
11
Pink/Black
For Future Use
APH-FD02-HAR V2
Purple
Orange
Orange
Pink/Black
Green
White
Gray
Blue
Brown
Red
20
10
Green/Black
Red/Black
White/Black
Gray/Black
Blue/Black
Brown/Black
Orange
Orange
1
11
Pink
Connect to aftermarket amplier
白色热缩管
Pin Number Wire Description Label
Wire Color
CAN
N/A
N/A
Center Channel
Subwoofer 1
Right Front Speaker
Left Front Speaker
Right Rear Speaker
Subwoofer 2
Left Rear Speaker
Copyright © 2019. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Rev: V1
Date: 061819
Page 1
Loading...