Pablo BOLA DISC, BOLA FELT Assembly Manual

pg. 1

BOLA

DISC / FELT

120/240V ASSEMBLY & INSTALLATION INSTRUCTIONS

[e-mail]

888 MARIN STREET

SAN FRANCISCO, CA

94124

PABLODESIGNS.COM

pg. 2

120/240V ASSEMBLY INSTRUCTIONS

BOLA CANOPY

1. ATTACH MOUNTING PLATE TO JUNCTION BOX OR CEILING

2. WIRE TRANSFORMER TO BUILDING
(US: BLACK TO BLACK AND WHITE TO WHITE)
( EU: BLUE TO BLACK AND BROWN TO RED)

3. CUT CORD TO DESIRED LENGTH AND PASS THROUGH
CANOPY. WIRE TRANSFORMER TO LAMP
(US: BLUE TO BRAIDED AND RED TO RED)

(EU: BLACK TO BRAIDED AND RED TO RED)

4. TIGHTEN SET SCREWS ON CORD RELIEF

5. BRING CANOPY UP TO MOUNTING PLATE WITH BOLTS
PASSING THROUGH THE HOLES

6. SCREW BOTH CAPS DOWN, SECURING THE CANOPY

IMPORTANT: WE RECOMMEND CEILING MOUNTING
BE INSTALLED BY AN ELECTRICIAN

LENGTH OF CORD SUPPLIED

10FT (305 CM)

2

3

4

6

5

2

1

RED