P1pe P6220C User Manual

P1PE - Heavy Duty Chainsaw
Model P6220C

User Manual

P1PE - Position One Power Equipment

Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW

www.p1pe.co.uk

CONTENTS Page/s

Page 2

1. SAFETY

2. MACHINE SPECIFIC SAFETY

3. SYMBOLS & PARTS LOCATIONS

4. SPECIFICATIONS

5. ASSEMBLY

6. STARTING & STOPPING THE MACHINE

7. MAINTENANCE

8. TROUBLESHOOTING

9. STORAGE & TRANSPORTATION

10. RECYCLING & PRODUCT DISPOSAL

4 – 7

7 – 8

9 – 10

11

12 – 14

14 – 20

21 – 25

25

25

26

11. DECLARATIONS of CONFORMITY

12. CONTACT DETAILS

13. MANUAL UPDATES

27

28

28

QUICK START GUIDE

Page 3

1. Apply chain brake.

2. Fill with fresh 2-stroke petrol and synthetic oil mixed at 40:1 ratio.

3. Fill chain lubricant chamber.

4. Pump primer bulb 6 times.

5. Switch ON/OFF switch to ON.

6. Pull out choke lever.

7. With chainsaw on the ground, put your right foot on rear handle to secure it.

8. Pull starter handle quickly.

9. After about 2-3 pulls the engine may fire slightly. If you continue to pull with
choke OUT it will flood the engine.

10. Push choke IN.

11. Pull starter handle quickly and chainsaw engine should start.

With a hot chainsaw, you may not need to use the choke. If it is warm, maybe half
choke.

1. SAFETY

Page 4

1.1. General safety notes.

1.1.1. The operator of the machine is responsible for, and has a duty of care
in making sure that the machine is operated safely and in accordance
with the instructions in this user manual. Keep the manual safe and pass
it on if the machine is loaned or sold to another user.

1.1.2. Please note the following safety points.

1.1.2.1. The machine should never be left it in a condition which would

allow an untrained or unauthorised person/s to operate this machine.

1.1.2.1.2. Some or all of the following - warning signs, symbols

The FOLLOWING safety notes will help avoid or reduce risk of injury or death.

1.1.2.1.1. All due care and diligence should be taken by the

operator for the safety of, and with regard to, those around
whilst using the machine.

and/or PPE pictograms may appear throughout this manual.
You MUST adhere to their warning/s. Failure to do so may
result in personal injury to yourself or those around you.

Indicates a hazard, which, if

not avoided, could result in

serious injury or death.

Indicates a situation that

could easily result in
equipment damage.

Appropriate Personal Protective Equipment (PPE)

MUST be worn at all times when machine is in use or being repaired.

ALWAYS keep the working area clear of non-essential people to include, but not

limited to, children, the elderly and vulnerable persons.

NEVER ALLOW an untrained person to use this machine.

Indicates a hazard, which, if

not avoided, could result in

serious injury.

READ and keep the manual

safe and pass it on if the

machine is loaned or sold

to another user

Indicates a hazard which, if
not avoided, might result in
minor or moderate injury.

You MUST fully read

instructions to make sure

you use and operate

machine safely

1.2. Carbon monoxide.

Headaches, dizziness, nausea, breathlessness, collapsing or loss of
consciousness.

Home, garage, tent, camper van, mobile home, caravan or boat.

Page 5

1.2.1. Carbon monoxide is a colourless and odourless gas. Inhaling this gas can cause
death as well as serious long term health problems such as brain damage.

1.2.2. The symptoms of carbon monoxide poisoning can include but are not limited
to the following;

1.2.2.1. Carbon monoxide poisoning symptoms are similar to flu, food

poisoning, viral infections and simply tiredness. It is quite common for
people to mistake this very dangerous poisoning for something else.

1.2.2.2. To avoid carbon monoxide poisoning DO NOT use Petrol/Diesel-

powered equipment inside any of the following;

This list is not exhaustive and if you are in any doubt contact your dealer.

1.2.3. If you think you have or someone around you has been affected by carbon
monoxide poisoning;

1.2.3.1. Get them fresh air immediately, by leaving the affected area or by

opening doors and windows. If safe and practical to do so make sure that
the machine is turned off. DO NOT enter a room you suspect of having
carbon monoxide present – instead call the emergency services.

1.2.3.2. Contact a doctor immediately or go to hospital - let them know that

you suspect carbon monoxide poisoning.

1.2.4. DO NOT use in an enclosed area or a moving vehicle.

1.3. General fuel safety.

Page 6

ALL FUELS ARE FLAMMABLE

1.3.1. Fire hazard - keep fuel away from all sources of ignition for example

heaters, lamps, sparks from grinding or welding.

1.3.2. DO NOT carry out hot work on tanks that have contained fuel it

is extremely dangerous.

1.3.3. ALWAYS keep work area clean and tidy.

1.3.4. ALWAYS clean up all spills promptly using correct methods i.e.

absorbent granules and a lidded bin.

1.3.5. ALWAYS dispose of waste fuels correctly.

1.4. Fueling/De-fueling (where applicable).

1.4.1. ALWAYS fuel and defuel in a well-ventilated area outside of buildings.

1.4.2. ALWAYS wear correct, suitable and fit for purpose Personal Protective

Equipment (PPE), suggested items are but not limited to safety gloves
and overalls.

1.4.3. When fueling/de-fueling ALWAYS avoid inhaling fumes

1.4.4. When de-fueling ALWAYS use a propriety fuel retriever.

1.4.5. ALWAYS carry fuel in the correct and clearly marked container.

1.5. Vibrations.

1.5.1. Prolonged use of hand held (operated) machines will cause the user to feel the

effects of/from vibrations. These vibrations can lead to white finger (Raynaud's
phenomenon) or carpal tunnel syndrome. This condition reduces the ability of
the hand to feel and regulate temperature, causing numbness and heat
sensations and may cause nerve damage and circulatory tissue death.

1.5.2. Not all factors that lead to white finger disease are known, but cold weather,

smoking and other diseases that affect blood vessels and blood circulation as
well as large and long-lasting impact of shocks are considered factors called in

the formation of white finger. Note the following to reduce the risk the white

Page 7

finger and carpal tunnel syndrome:

1.5.2.1. Wear gloves and keep your hands warm

1.5.2.2. Take regular breaks

1.5.3. All of the above precautions may help reduce the risk of white finger disease

but not rule out carpal tunnel syndrome. Long-term and regular users are
therefore recommended to observe the condition of your hands and fingers.
Seek medical attention immediately if any of the above symptoms should occur.

1.6. Noise.

1.6.1. The operating noise of the machine can damage your hearing. Wear hearing

protection such as earplugs or ear defenders to protect your hearing. Long­term and regular users are advised to have hearing checked regularly. Be
especially vigilant and cautious when wearing hearing protection because your
ability to hear alarm warnings will be reduced.

1.6.2. Noise emissions for this equipment is unavoidable. Carry out noisy work at

approved times and for certain periods. Limit the working time to a minimum.
For your personal protection and protection of people working nearby it is also
advisable for them to wear hearing protection.

1.6.3. See CERTIFICATE of CONFORMITY section for Outdoor Noise declaration of

conformity.

2. MACHINE SPECIFIC SAFETY

2.1. Before using the machine.

2.1.1. Read this owner’s manual carefully to understand how to operate this unit
properly.

2.1.2. Precautions.

2.1.2.1. You should NEVER use the product when;

2.1.2.1.1. Wearing loose clothing such as loose cuffs, when wearing sandals,

or when barefoot.

2.1.2.1.2. Under the influence of alcohol.

2.1.2.1.3. Suffering from exhaustion or lack of sleep.

2.1.2.1.4. Suffering from drowsiness as a result of having taken a medicine for

cold or flu, or at any other time when a possibility exists that your
judgment might be impaired or that you might not be able to
operate the machine properly and in a safe manner.

2.1.2.2. NEVER run the engine indoors. The exhaust gases contain harmful carbon

monoxide.

2.1.2.3. NEVER use the product under circumstances like those listed below;

2.1.2.3.1. When the ground is slippery or when other conditions exist which

might make it not possible to maintain a steady posture.

2.1.2.3.2. At night, at times of heavy fog, or at any other times when your field

of vision might be limited and it would be difficult to gain a clear

Page 8

view of the area.

2.1.2.3.3. During rain storms, lightning storms, at times of strong or gale-force

winds, or at any other times when weather conditions might make it
unsafe to use this product.

2.1.2.4. When using this product for the first time, and before beginning actual

work, you MUST learn how to handle the machine from a

n experienced

or skilled person.

2.1.2.5. Lack of sleep, tiredness, or physical exhaustion results in lower attention

spans, and this in turn leads to accidents and injury.

2.1.2.6. Limit the amount of time of using the machine continuously to

somewhere around 10 minutes per session, and take 10 to 20 minutes of
rest between work sessions. Also try to keep the total amount of work
performed in a single day under 2 hours or less.

2.1.2.7. Make sure that you keep this manual handy so that you may refer to it

later whenever any questions arise.

2.1.2.8. Always be sure to include this manual when selling, lending, or otherwise

transferring the ownership of the product.

2.1.2.9. NEVER allow children or anyone unable to fully understand the directions

given in this manual to use this product.

2.2. Personal protective equipment.

2.2.1. When using the product, you should wear proper protective clothing and
equipment as follows;

2.2.1.1. Helmet.

2.2.1.2. Protection goggles or a face protector.

2.2.1.3. Thick work gloves.

2.2.1.4. Non-slip soled work boots

2.2.1.5. Ear protectors

2.2.1.6. You should also carry with you.

2.2.1.6.1. Attached tools and files.

2.2.1.6.2. Reserve fuel and chain oil.

2.2.1.6.3. Things to notify your working area such as rope to cordon of area

and warning signs.

2.2.1.6.4. Whistle to get assistance in an emergency.

2.2.1.6.5. Hatchet or saw for removal of obstacles.

3. SYMBOLS & PARTS LOCATIONS

Page 9

3.1. Symbols on the machine.

3.1.1. For safe operation and maintenance, the following symbols are on the
machine.

3.1.1.1. Fueling point “MIX PETROL”, located on fuel tank cap.

3.1.1.2. Chain oil filling point the “CHAIN OIL”, located on oil cap.

3.1.1.3. Engine switch operation. Move the engine switch to the “O” (STOP)

direction, the engine stops, located rear-left of the unit.

3.1.1.4. Choke lever operation. Pulling out the choke knob will close the choke,

located rear-right of the unit.

3.1.1.5. Chain oil adjuster nut. “MIN” direction-the oil flow decreases, “MAX”

direction-the oil flow increases, located bottom of the clutch side.

3.1.1.6. Idle adjusting screws - the position of H-needle and L-needles, located

rear-left of the unit.

H

L

T

3.2. Warning labels on machine.

3.2.1. Read owner’s manual.