P1PE P140T, P140TE User Manual

FOR YOUR SAFETY
You must read and understand
this manual before use.
Keep this manual for future
reference.

1

CONTENTS

PAGE NO.S

1

SAFETY 3 - 8

2

PART LOCATIONS

9

3

QUICK START GUIDE

10 - 13

4

STARTING PROCEDURE

13

5

STOPPING PROCEDURE

14

6

USING THE MACHINE

14 - 16

7

MAINTENANCE

16 - 20

8

TROUBLESHOOTING

21

9

SPECIFICATION

22

10

DECLARATIONS OF CONFORMITY

23

11

RECYCLING AND PRODUCT DISPOSAL

24

12

CONTACT DETAILS

25

13

WARRANTY 25

14

MAUAL UPDATES

25

INDEX

2

1.1 General Safety Notes.

1.2 The operator of the machine is responsible for, and has a duty of care in making sure

that the machine is operated safely and in accordance with the instructions in this
user manual. Keep the manual safe and pass it on if the machine is loaned or sold to
another user.

1.3 Please note the following safety points.

1.4 The machine should never be left it in a condition which would allow an untrained or

unauthorised person/s to operate this machine.

1.5 All due care and diligence should be taken by the operator for the safety of and with
regard to those around whilst using the machine.

1.6 Some or all of the following - warning signs, symbols and/or PPE pictograms may

appear throughout this manual. You MUST adhere to their warnings. Failure to do
so may result in personal injury to yourself or those around you.

DANGER

Indicates a hazard, which, if not avoided, could result in serious injury or death.

WARNING

Indicates a hazard, which, if not avoided, could result in serious injury.

CAUTION

Indicates a hazard which, if not avoided, might result in minor or moderate injury.

NOTE

Indicates a situation that could easily result in equipment damage.

READ and keep the manual safe and pass it on if the machine is loaned or sold to another user.
You MUST fully understand all instructions to ensure you use and operate the machine safely.

Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating or
repairing the machine.

3

1.10 Carbon Monoxide (where applicable).

1.11 Carbon monoxide is a colourless and odourless gas. Inhaling this gas can cause

death as well as serious long term health problems such as brain damage.

1.12 The symptoms of carbon monoxide poisoning can include but are not limited to the

following;
Headaches, dizziness, nausea, breathlessness, collapsing or loss of consciousness.

1.13 Carbon monoxide poisoning symptoms are similar to flue, food poisoning, viral

infections and simply tiredness. It is quite common for people to mistake this very
dangerous poisoning for something else.

1.14 To avoid carbon monoxide poisoning DO NOT use Petrol/Diesel powered equipment

inside any of the following; Home, garage, tent, camper van, mobile home, caravan
or boat. This is not exhaustive and if you are in any doubt contact your dealer.

1.15 If you think you have or someone around you has been affected by carbon monoxide

poisoning;

1.16 Get them fresh air immediately, by leaving the affected area or by opening doors and

windows. If safe and practical to do so make sure that the machine is turned off.
DO NOT enter a room you suspect of having carbon monoxide present – instead call
the emergency services.

1.17 Contact a Doctor immediately or go to Hospital – let them know that you suspect

carbon monoxide poisoning.

1.18 DO NOT use in an enclosed area or moving vehicle.

1.20 General Fuel Safety (where applicable).

CAUTION

ALL FUELS ARE FLAMABLE

1.21 Fire Hazard – keep fuel away from all sources of ignition for example heaters.

Lamps, sparks from grinding or welding.

1.22

1.23 ALWAYS keep the work area tidy.

1.24 ALWAYS clean up spills promptly using absorbent granules and a lidded bin.

1.25 ALWAYS dispose of waste fuels correctly.

1.30 Fueling/De-fueling (where applicable).

DO NOT carry out hot work on tanks that have contained fuel.

4

CAUTION

ALL FUELS ARE FLAMABLE

1.31 ALWAYS fuel and defuel in a well ventilated area outside of buildings.

1.32 ALWAYS wear correct, suitable and fit for purpose Personal Protective Equipment

(PPE), suggested items are but not limited to safety gloves, overalls.

1.33 When fueling/de-fueling ALWAYS avoid inhaling fumes.

1.34 When de-fueling ALWAYS use a proper fuel retriever.

1.35 ALWAYS carry fuel in the correct and clearly marked container.

1.40 Electrical Safety )where applicable).

1.41 Electricity can kill – NEVER work on LIVE/ENERGISED equipment.

1.42 Prior to carrying out any maintenance work you MUST identify electrical isolation

methods and isolate all electrical supplies.

1.43 Prior to use and with all electrical supplies isolated, you MUST check all electrical

cables, plugs and connectors for the following;

1.44 Are intact and have no signs of damage, to include but not limited to bare wires,

chaffing, cuts and loose wiring.

1.45 If there are any signs of damage, the damage item MUST be taken out of service

until the damage has been repaired by an electrically competent person.

1.46 All trailing cables should be routed so as not to cause any kind of trip hazard.

1.47 NEVER work on or near electricity with wet hands, wet clothing and wet gloves.

1.50 Batteries (where present).

1.51 Batteries present a risk if they become damaged by the possible leaking of

electrolyte. This electrolyte is an acid and can cause serious burn injuries. Care
should be taken when working on or near them. NOTE the electrolyte may be in
a liquid or gel form.

1.52 Should you come in to contact with electrolyte you should;

1.53 Remove all clothing contaminated with electrolyte. If you cannot remove then

saturate them in water.

1.54 Get medical assistance as soon as possible. You must advise the medical staff of

the type of acid.

1.55 Lead/acid battery = dilute sulphuric acid.

5

1.56 Nickel/cadmium = potassium hydroxide alkali electrolyte.

1.57 Use fresh running water to wash off excess electrolyte, continue this until medical

assistance arrives. Make sure that you do not was the electrolyte to another part of
your body or face.

1.58 If electrolyte comes in to contact with Eyes the electrolyte needs to be immediately

washed away with large amounts of water. Make sure that you do not wash the
electrolyte to another part of your face or body.

1.59 Gasses from charging batteries are highly flammable and great care should be taken

to charge in well ventilated areas.

1.59.1 There is an explosion risk if the battery terminals are short circuited, when

connecting/disconnecting ALWAYS exercise great care so that the terminals or
battery leads are NOT allowed to touch and cause a spark. ALWAYS use suitable
insulated tools.

1.60 Vibrations (where applicable).

1.61 Prolonged use of hand held (operated) machines will cause the user to feel the

effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s
phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the
hand to feel and regulate temperature, causing numbness and heat sensations and
may cause never damage and circulatory tissue death.

1.62 Not all factors that lead to white finger disease are known, but cold weather, smoking

and other diseases that affect blood vessels and blood circulation as well as large
and long-lasting impact of shocks are considered factors in the formation of white
finger. Note the following to reduce the risk of white finger and carpal tunnel
syndrome;

1.63 Wear gloves and keep your hands warm.

1.64 Take regular breaks.

1.65 All of the above precautions may help reduce the risk of white finger disease but not

rule out the carpal tunnel syndrome. Long-term and regular users are therefore
recommended to observe the condition of your hands and fingers. Seek medical
attention immediately if any of the above symptoms should occur.

1.70 Noise (where applicable).

1.71 The operating noise of the machine can damage your hearing. Wear hearing

protection such as earplugs or ear defenders to protect your hearing. Long-term
and regular users are advised to have hearing checked regularly. Be especially
vigilant and cautious when hearing ear protection because your ability to hear alarm
warnings will be reduced.

1.72 Noise emissions for this equipment is unavoidable. Carry out noisy work at approved

times and for certain periods. Limit the working time to a minimum. For your personal
protection and protection of people working nearby it is also advisable for them to
wear hearing protection.

1.73 See CERTIFICATE of CONFORMITY section for Outdoor Noise declaration of

conformity.

6

MACHINE SPECIFIC SAFETY

1.80 General Machine Safety.

1.81 Read the owner’s manual carefully to understand how to operate this machine

properly.

1.82 Inspect machine before use and replace any damaged parts before operation.

Check for fuel leaks and make sure all fasteners are secure and in place.

1.83 Replace parts that are cracked, chipped or damaged in any way before using the

machine.

1.84 Stop the engine before working on the machine for maintenance.

1.85 Never put feet or hands near the machine tiller blades when running.

1.86 Before tilling, remove all large objects which may cause injury or damage.

1.87 Keep children, people and pets at a safe distance when the tiller is in use.

1.88 DO NOT operate this rotary cultivator after drinking, taking medication or drugs that

can impair judgement.

1.89 Use only recommended accessories and parts, approved by the manufacturer.

Non approved parts may cause damage to the machine or harm to the user and will
also void your machines warranty.

1.90 Under no circumstances should you ever take the product apart or alter it in any way

even if the item is faulty.
You may damage or cause further harm by taking the product apart and you will void
the warranty in doing so.

1.91 This tiller is designed exclusively for tilling in garden areas in a private domestic

setting.
Using it for any other purpose other than those intended qualify as improper use.
The operator is solely responsible for assuming all risks.

1.92 You should prevent the equipment from coming into contact with buried electrical

cables, earthing devices, such as pipe lines.
Making contact with these may cause electric shock and or damage to your
machine.

1.93 DO NOT overload the machine. For the first tilling of the season use at the highest

setting, it will prevent the machine from being overloaded.

1.94 The machine will work better when operated within its specified performance range.

1.95 If the blade is blunt have it sharpened and rebalanced or replace it. Blunt blades will

not till the soil efficiently, so check blade carefully before each use.

1.96 Before cleaning, maintaining or replacing parts, cut off the power supply to the rotary

cultivator and ensure all moving parts have stopped.

1.97 The rotary tiller should be maintained by a professional maintenance person.

All maintenance or service by non-professionals may result in users’ injury or
equipment damage.

7

1.98 If the equipment is running abnormally, please stop the engine and carefully check

all the parts to see if any part is damaged.
Repair it before re-starting and using the equipment.

1.99 DO NOT exceed the cultivable depth.

1.99.1 DO NOT work too fast.

1.99.2 If the machine comes in to contact with big blocks, roots or vines, the equipment will

spring upwards and forwards.
Stop the machine and remove the HT lead before removing any blockages.

1.99.3 Avoid pulling the tiller while the engine is running.

1.99.4 Keep and read the instructions often.

1.99.5 Use them to show others how to operate the tiller safely.

1.99.6 When the equipment is not being used, remove the HT lead to avoid accidental

starting.

1.99.7 Only use in good natural light.

1.99.8 Correct Personal Protective Equipment (PPE) MUST be worn at all times when

operating or repairing this machine. This should include but is not limited to;

8

2. PART LOCATIONS

1

Clutch Handle

7

Rotary Tines

2

Recoil Starter Handle

8

Depth / Drag Bar

3

Fuel Filler Cap

9

Exhaust

4

Air Filter

10

Oil Filler / Dipstick

5

Spark Plug

11

Handlebars

6

Transport Wheel

12

Throttle Control Lever

1
12

11 2

3

4
10

9

8 5

7
6

9