![](/html/d7/d77a/d77ab60765c67da00b7866cf96403e93e8c336468804581a0a77a50bdfa5adfc/bg2.png)
Ozone Strato Evo 5.1 Gaming Headset User Manual
This Manual can include technical or other mistakes,
inaccuracies or typographical errors. OZONE may make
changes to the informations at this manual, including the
descriptions of the products, at any time without notice.
©2010 OZONE Gaming Gear. All rights reserved.
2
![](/html/d7/d77a/d77ab60765c67da00b7866cf96403e93e8c336468804581a0a77a50bdfa5adfc/bg3.png)
5.1 SU RROUND SOUND
PROF ESSI ONAL GA MING HEADSET
3
![](/html/d7/d77a/d77ab60765c67da00b7866cf96403e93e8c336468804581a0a77a50bdfa5adfc/bg4.png)
THE D RIVE R INSTALLATION
1. Before installation, you must preserve the open application and
then exit, to avoid data loss after installation.
2. Open your computer, before install driver, first connect headset
USB plug into your computer USB interface, then in windows
explorer find “Setup.exe”, double-click it for intsllation.
3. When starting installation application, click “Next”.
Choose contents to install.
To begin installation click “Next”.
Info about drivers and destiny directory. Installation progress.
4
![](/html/d7/d77a/d77ab60765c67da00b7866cf96403e93e8c336468804581a0a77a50bdfa5adfc/bg5.png)
4. You’ll need to reboot system in order to
complete the installation. Click “OK” and
reboot system will reboot.
WIN DOWS XP OPERATING I NTERFACE
Main setting:
In the tray, click the USB 3D sound configuration,
and pop-up the Ozone Strato configuration panel:
1
2
3
4
5
7
8
6
9
10 11
5
![](/html/d7/d77a/d77ab60765c67da00b7866cf96403e93e8c336468804581a0a77a50bdfa5adfc/bg6.png)
1. Analog Output: selected this button can choose channel model
of analog output.
2. Mode of analog channel: you can choose this kinds of headphone setting: 2, 4, 6 or 8 speakers. Please choose 6 speakers.
3. Advanced settings for heavy bass and vibration intensity.
4. Didn’t provide digital output.
5. Display connection of audio and microphone, but you can
change it, is just for reference.
6. DSP mode: click DSP setting, change it to DSP use mode.
7. Switching the actual speaker: open the speaker setting then
choose what you like.
8. Digital volume control: you can adjust volume for each channel.
9. Display channel and speaker test: it displays state of cahnnel of
analog output, click the speaker to begin sound test.
10. Automatic sound test: each channel can be tested automatically.
11. Stop the sound test.
MIXER
Operating interface of Mixer, can adjust volume of waveform and
microphone.
10
4 7
1
2
3
6
5 8
6 9
13 17
11
14 18
12
15 16
19