Ozone Gaming Neon User Manual

USER MANUAL

2

System RequirementS

1. Operation System: Windows XP / Vista / 7 / 8

2. Free USB 1.1/ 2.0 port

3. CD-ROM drive

4. 50 MB free hard disk space

InstallatiOn InstructiOnS

1. Plug USB connector of NEON to a USB port of your PC

2. Insert the enclosed driver CD into your CD-ROM drive

(or download the driver from www.ozonegaming.com)

3. Double Click “Setup.exe” to start the installation program. Click “Next” to continue

4. Select the folder to save the driver and click “Next” to continue

5. Installation will run automatically; click “Finish” to complete the installation

Left/Right Hand User Swap

1. Right to left hand user mode: click both left button (1) + scroll button (3) for 5 seconds.

2. Left to right hand user mode: click right button (2) + scroll button (3) for 5 seconds.

6

u

2

It’s all about evolution

MAIN NEON DRIVER SKIN

3

mOuse CONFIGURATION

1. ADVANCED SETTINGS:

1. Polling Rate Settings.

2. On-To-Go Speed Settings (Speed of repeat mouse functions, refer to 2.6 Mouse

Function)

3. Reset to Factory Default: In the pop-up window, click “OK” to apply the changes.

4

2. buttON SETTINGS:

MACRO MANAGER

Macro is a series of desired keystrokes which can be assigned to the mouse once
recorded. In other words, it is a series of key press and releases, in which every
keystroke pressed, released, and delays are recorded.

k

u

5

Create and Assign a Macro

1. Select a button and click ”Macro Manager” from the menu.

2. In the pop-up window, click “NEW” and give the macro a personalized name, then

start to create the macro.

3. Select the options of “Record Delays” and set the “Loop Times” from the right

column if needed.

4. Click ”Start Record” type your desired keys and click “Stop Record” when

finished. Click “OK” to continue.

5. Assign one of the “Marco” created to a “Button” and click “APPLY” to complete

the settings.

6

multimedia

1. Select a button and click ”Multimedia” from the menu.

2. Select the desired function in the sub-menu and click “APPLY” to confirm the

settings.

7

PROFILE SWITCHING

1. Select a button and click ”Profile” from the menu.

2. Select the desired function in the sub-menu and click “APPLY” to confirm the settings.

Profile Cycle: Cycle Switching / Profile Up: Profile + / Profile Down: Profile -

8