Ozito UJC-860 Operation Manual
0812
UJC-860 manual.qxd 9/18/09 9:46 AM Page 1
Black
Cyan
Magenta
Yellow
Code: UJC-860
Date: 18/09/09 Edition: 02 Op: Even
Jaw Size: 180mm x 75mm
Clamping Capacity: 860mm
Clamping Force: 1000kg
Rail Diameter: 32mm
Rail Detents: 18 x 50mm
1
1. Front vice jaw
2. Rear vice jaw
3. Ur
ethane jaw facings (x2)
4. Hex scr
ews (x4)
5. Front vice jaw clamping handle
6. Rear vice jaw locking pins (x2)
7. Vice rails
8. Vice rail detents (x18)
9. Front leg locking pin (x2)
10. Rear leg locking pin (x2)
11. Front legs (x2)
12. Rear legs (x2)
13. Fr
ont leg suppor
t brace
14. Fr
ont suppor
t brace locking knob
15. Rear leg suppor
t brace
16. Rear support brace locking knob
17. Uni-Jaws bed
18. Log jaws (x2)
19. 6mm Hex Key
1
9
17
SPECIFICATIONS - MODEL NO. UJC-860
KNOW YOUR PRODUCT
2
3
7
8
10
12
11
16
15
13
14
18
19
5
4
6
UJC-860 manual.qxd 9/27/09 12:32 PM Page 2
TABLE OF CONTENTS
2
SPECIFICATIONS………………………………………….
KNOW YOUR PRODUCT…………………………………
INTRODUCTION…………………………………………
SAFETY INSTRUCTIONS………………………………..
SETTING UP………………………………………………
OPERATION………………………………………………
MAINTENANCE …………….……………………………
CONTENTS ………………………………………………
WARRANTY……………………………………………….
Page 1
Page 1
Page 3
Page 3
Page 4
Page 6
Page 10
Page 10
Page 11
UJC-860 manual.qxd 9/27/09 12:32 PM Page 3
INTRODUCTION
3
SAFETY INSTRUCTIONS
WARNING! Read and understand all instructions. Failure to follow all
instructions listed below may result in personal injury.
• Make sure all moving parts are free from interference.
• Keep hands clear of all moving parts.
• Ensure Uni-Jaws is set-up on firm ground in a stable manner.
• Use Uni-Jaws in a dry place protected from rain.
• Keep work area well-lit.
• Never stand or sit on the Uni-Jaws.
• Be aware of overbalancing. When a large piece is cut from one end of a job,
the remaining piece may be heavy enough to over-balance the Uni-Jaws.
Always ensure the workpiece is well supported.
The Uni-Jaws are the ultimate portable work vice for the
workshop. With a powerful clamping force of up to 1000kg
and large vice jaws the Uni-Jaws will hold just about
anything including timber, metal and even logs when fitted
with the log jaws.
The Uni-Jaws feature twin chrome rails for greater durability
and easy sliding of the rear jaws, with 18 indents the quickrelease rear jaws can be quickly adjusted to suit both small
and large workpieces.
As opposed to a traditional vice positioned on a workbench
the Uni-Jaws give you 360° access to your workpiece for
ultimate flexibility and ease of use.
The steel construction increases durability and extends the
life of the jaws whilst the folding legs provide stability on
most surfaces and can be easily folded-up to allow fo easy
storage and transportation.
This product is intended for DIY use only.
UJC-860 manual.qxd 9/27/09 12:32 PM Page 4
Loading...