Ozito TSB-0808U Original Instructions Manual

EH-Art.-No.: 4340420 I.-No.: 11016

TABLE SAW

800W 200mm

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Motor: 800W (S2 10 min)
No Load Speed: 2,950/min
Blade: Ø200mm x Ø16 x 2.4mm
Depth Of Cut: 0-45mm
Bevel Angle: 0-45° left
Max. Cutting Capacity:
Bevel 90°: 45mm
Bevel 45°: 35mm
Table Size: 500x3350mm
Dust Port: Ø36
Weight: 13kg

TSB-0808U

WHAT’S IN THE BOX

Push Stick

Table Saw

Rip Fence

Mitre Gauge

WARRANTY

ozito-diy.co.uk

0916

Spanners

OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.

CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

1. Integrated Extension Table

2. Folding Legs

3. Push Stick Holder

4. Ext. Table Lock Knob

5. On/Off Safety Switch

6. Overload Protection Reset

7. Blade Guard

8. Bevel Lock Knob

9. Blade Depth Adjustment Knob

10. Bevel Adjustment Handwheel

11. Rip Fence Extrusion

12. Rip Fence Lock Knob

13. Rip Fence Extrusion Locks

TABLE SAW

14. Screw & Cap

15. Mitre Gauge

16. Mitre Gauge Knobs

17. Rip Fence

18. Push Stick

19. Blade Spanner 8mm

20. Blade Spanner 19mm

KNOW YOUR PRODUCT

1. ASSEMBLY

2. Place the rip fence on the table top, either the left or right hand
side of the blade.

3. Now screw the rip fence lock knob through the fence and into
the metal plate on each end.

1. Mount blade guard on the riving knife so that the bolt ts through

the hole in the riving knife.

SETUP & PREPARATION

Blade Guard

Rip Fence

WARNING!: ENSURE THE TOOL IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE ASSEMBLY

Riving
Knife

Bolt
& Nut

Riving
Knife

2. Do not tighten nut too far - the blade guard must be able to
move up and down freely.

Lock
Knob

Rip
Fence

Metal
Plate

4. Tighten lock knob to secure in place.

Extrusion

Rip Fence

Nuts

1. Loosen the two nuts sufciently

to allow the extrusion to slide
onto and along the rip fence.