Ozito SSH-2440 User Manual

SILENT
SHREDDER

2400W

INSTRUCTION MANUAL

STANDARD EQUIPMENT

Shredder
Housing

Wheels x 2 Wheel Axle

Support Legs x 2

SPECIFICATIONS

Power Rating: 2400W (S6 40%), 2000W (S1)
No Load Speed: 40/min
Max. Cutting: Ø40mm
Noise Level: 93 dB
Blades: Roller Cutting System
Collection Bag: 64 litre
Protection Class: 1 (Earthed Appliance)
Weight: 23 kg

ozito.com.au

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.

Hub Caps x 2

Collection BagWheel Plug x 2

Nut & Washer x 6 Hex Key

Hex WrenchBolt x 2

SSH-2440

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.

Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will

be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts and included accessories, for
example: Rolling cutter head and plate, collection bag and wheels.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other
than that specified on the tool.

• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the
instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

0318

3

KNOW YOUR PRODUCT

ASSEMBLY

SILENT SHREDDER

1. On/off switch

2. Transport handle

3. Reset button/overload protector

4. Direction control switch

5. Hopper

2 41 3 5

6. Cutting adjustment Knob

7. Discharge chute

8. Stand

9. Wheels

6

1. WHEELS & STAND

WARNING! YOU MAY REQUIRE ASSISTANCE

LIFTING THE SHREDDER OUT OF THE CARTON.

WARNING!: ENSURE THE TOOL IS TURNED OFF

AND DISCONNECT FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.

After removing the silent shredder from the
carton, check that the shredder has not
been damaged. Unpack the contents.

Fitting the wheels and stand

1. Carefully place the shredder housing

upside down on a at surface.

2. Place each leg over the 2 threads
on the base of the shredder
housing. For maximum stability
ensure that the legs are facing
outwards.

ACCESSORIES

10. Collection bag

11. Hex key

12. Hex wrench

10 11 12

7

8

9

3. Place a at washer followed by the

nut over each of the 4 threads. Lightly
tighten using the hex wrench supplied.

4. Fit the wheel axle to the base of the
legs ensuring that it is positioned
towards the rear of
the shredder.

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

5. Secure the axle onto the legs
using 2 bolts, nuts & washers.

a. Place the bolt through the hole

in the axle followed by the leg.

b. Fit a at washer over each bolt, attach

the nut onto the bolt and tighten using
the hex wrench and hex key (only
partially tighten at this stage).

c. Repeat for the opposite leg.

6. Securely tighten the 4 nuts on the
base of the shredder followed by
the 2 bolts & Nuts on the wheel
axle.

Ensure the stand and axle are

secure and do not wobble.

9. Fit a wheel plug onto each
end of the axle to secure
the wheels on the axle.
Use a rubber mallet (not
included) and lightly tap the
plugs into position on the
axle.

10. Push the hub caps onto the
centre of the wheels so it
clicks into place.

11. Once fully assembled,

carefully lift the shredder
into its correct position
supported by the stand and
wheels..

7. Fit a wheel onto each side
of the axle.