Ozito RTB-003 Instruction Manual

ROUTER
TABLE

855 x 335MM

INSTRUCTION MANUAL

SPECIFICATIONS

Power: 220-240V~ 50Hz
Main Table: 455 x 335mm
Table with Extensions: 855 x 335mm
Router Max. Power: 1800W
Router Bit Max.: Ø22mm
Router Max. Weight: 3.5kg
Table Inserts: Ø13mm (1/2”)
Ø19mm (3/4”)
Ø25mm (1”)
Ø32mm (1-1/4”)
Ø38mm (1-1/2”)
Weight: 7.0kg

RTB-003

WHAT’S IN THE BOX

Router Table

Switch Box, Feather
Boards x 3

Table Inserts x 5

Mitre Gauge & Table
Extensions

IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It

Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other
than that specified on the tool.

• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the
instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.

OZITO

Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.

ozito.com.au

0617

Bolts, Knobs, Nuts &
Washers

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

1. Fence

2. Table Extension

3. Mitre Gauge

4. Feather Board

5. Switch Box Outlet

6. On/Off Switch

7. Guard

8. Dust Port

9. Leg

10. Table

ROUTER TABLE

KNOW YOUR PRODUCT

1. ASSEMBLY

Attaching the legs and table extensions.

3. Place table leg as

shown. Loosely x

in position using four

screws and ange lock

nuts, do not fully tighten
yet.

6. Repeat steps 2 to 5 for the other table extension and table legs.
Once all four legs are securely tightened, turn assembly over
and check the router table does not rock.

SETUP & PREPARATION

The router table must be fully assembled before use.

2. With the table and
one table extension

upside down on a at

surface, align the table
extensions as shown.
Once aligned, slide
the table and table
extension together.

NOTE: The table leg ts inside

the table prole, with xing

screws inserted from the outside.

1. Use 16, 18mm Phillips head
assembly fasteners as
shown.

4. Repeat step 3 above for opposite table leg.

5. Once both table legs are loosely tted, ensure the table and
table extension are lying perfectly at, gently tighten all screws,

working from the centre to the outside.

Insert router mounting bolts

1. Use 4, 50mm Coach bolts, router clamps and assembly
fasteners as shown.

2. Insert four 50mm
coach bolts into the
holes as shown from
the top of the table.

3. From the underside,

loosely t bracket,
washer and ange nut

as shown. Do this for
all four bolts.

ACCESSORIES

11. Table Inserts x 5

2. With the router table on its
legs, align the 2 screw holes
in the switch box with the
corresponding holes in the
table.

Attaching Fence

Attaching Fence Feather Boards

1. Use 2, 40mm Hex head bolts, washer and locking knob
assembly fasteners as shown.

2. Insert the bolts from the
underside of the table
through the holes marked.

3. Place the fence on the bolts and secure in position with washer
and locking knob.

1. Use 4, 40mm Coach bolts, washer and wing nut assembly
fasteners as shown.

2. Fit the fence feather boards to the front of the fence as shown.

NOTE: Pay attention to

the feed direction.

Attaching Table Feather Board

1. Use 2, 30mm Hex head bolts, washer, locking knobs and spacer
assembly fasteners as shown.

2. Insert the two hex head bolts
from the underside of the
table, place spacers on the
bolts ensuring the correct
orientation.

3. Place the feather board on
top, place washer on each
bolt and secure with locking
knobs.

Attaching Switch Box.

1. Use 2, 18mm Phillips head
assembly fasteners as
shown.

x

3. Using screws from the front of

the table secured with ange

lock nuts.