Ozito ROS-4000 Instruction Manual
RANDOM
ORBITAL
SANDER
450W
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 230-240V~50Hz
Motor: 450W
No Load Spead: 12,000/min
Pad Size: 125mm
Paper Fitment: Hook & Loop
Weight: 2.0kg
ROS-4000
WHAT’S IN THE BOX
Random Orbital Sander
Sand Paper
ozito.com.au
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. SANDING PAPER FITMENT
KNOW YOUR PRODUCT
1. Align the holes on the sand paper with the holes on the sanding
pad and place it on the hook and loop backing pad.
6. Sand Paper
ACCESSORIES
1 Adjustable Front Handle
2 Handle Locking Knob
3 Hook & Loop Backing Pad
4 On/Off Switch
5 Dust Canister
RANDOM ORBITAL SANDER
SETUP & PREPARATION
2. Replace the sand paper when it becomes worn.
3. Replace hook &
loop backing pad
when worn (see
maintenance section).
Ensure the tool is disconnected from the power supply
before performing any of the following operations.
2. ADJUSTING THE FRONT HANDLE 3. DUST CANISTER
2. To remove, pull the dust canister away from the extraction port.
1. Push the dust canister onto the dust extraction port.
OPERATION
1/3 Full
3. Empty dust canister when it becomes 1/3 full for optimum dust
extraction.
2. Adjust handle to
desired position.
1. Turn the handle
locking knob anticlockwise to loosen.
3. Turn handle locking
knob clockwise to
secure handle in
desired position.
Loading...