Ozito ROS-2000U Original Instruction

RANDOM
ORBITAL
SANDER

230W

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Motor: 230W
No Load Speed: 12,000/min
Disc Size: 125mm (5”)
Paper Fitment: Hook and Loop
Power Cord: 2m
Weight: 2kg

ROS-2000U

WHAT’S IN THE BOX

Random Orbital Sander

Sandpaper Sheet

Dust Bag

ozito-diy.co.uk

WARRANTY

OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

0616

All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.

CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

KNOW YOUR PRODUCT

1. HOOK AND LOOP SANDING SHEET

1. When placing the sheet, align the holes on the sanding sheet with
the holes on the sanding pad.

5. Dust Bag 6. Hook & Loop Sanding Sheet

ACCESSORIES

1 On/Off Switch

2 Hook & Loop Backing Pad

3 Soft Grip

4 Dust Bag Adaptor

RANDOM ORBITAL SANDER

SETUP & PREPARATION

2. Replace the sanding sheet when it is worn.

3. Replace hook &
loop backing pad
when worn (see
maintenance section).

Ensure the tool is disconnected from the power supply before
performing any of the following operations.

1. Connect the tool to the mains power supply.

2. DUST BAG 3. ON/OFF SWITCH

2. To turn on, press the on/off switch to the “I” position.

3. To turn off, press the on/off switch to the “0” position.

2. To remove, pull
the dust bag away
from the extraction
port.

1. Push the dust
bag onto the dust
extraction port
aligning the locking
tab and rotate as
shown.

OPERATION

Install

The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.

1/3

3. Empty dust bag when it becomes 1/3 full for optimum dust
extraction.

CAUTION: GUIDE THE CORD DURING SANDING TO

PREVENT IT BEING CAUGHT ON THE WORKPIECE,
OR OTHER OBJECTS.

Remove

Empty