Ozito PCR-3100U Original Instructions Manual
MINI
CIRCULAR SAW
85mm 450W
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Power: 450W
No Load Speed: 6,000/min
Blade Diameter: 85mm
Max Cut: 23mm
18mm with base
Weight: 2kg
PCR-3100U
WHAT’S IN THE BOX
Mini Circular Saw
Guide Fence & Hex Keys
Blades x 3
ozito-diy.co.uk
Dust Extraction Adaptor
Guide Rails x 3
WARRANTY
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
0716
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectication of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,
the work performed or parts tted will not result in an extension of the
guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Guide Fence Locking Knob
2 Base Plate
3 Blade
4 Depth Locking Screw
5 Plunge Release Button
6 On/off Switch
7 Sure Grip Handle
8 Reset Button
MINI CIRCULAR SAW
KNOW YOUR PRODUCT
1. CHANGING BLADES
2 Rotate both hex keys
clockwise (in opposing
directions) to loosen the
blade. Remove the screw
and outer ange.
5 Replace the blade,
ensuring the blade direction
matches the arrow on the
guard.
3 Press the plunge release
button and raise the base
plate to expose the blade.
9 Guide Rails x 3
10 Diamond Blade
11 TCT Blade
12 HSS Blade
13 Dust Extraction Adaptor
14 Hex Key x 3
15 Guide Fence
ACCESSORIES
SETUP & PREPARATION
Ensure the tool is disconnected from the power supply before
performing any of the following operations.
1 Insert a hex key in saw
blade securing screw on
both sides of the blade.
4 Remove the blade in a
downward direction.
6 Insert the ange and tighten
the blade securing screws
to secure the blade in
place.
Note: Before starting the saw, ensure that the blade is tted
correctly and moves smoothly.
1
9
1413 15
10 11 12
2 3 4 5 6 7 8
2. FITTING ATTACHMENTS 3. CONTROLS
Plunge Release
1 With the base plate
at on the work piece,
pull or push the plunge
release button.
1 Loosen the guide fence
locking knob.
2 Slide the guide fence
through the holes in the
base plate to the desired
width.
3 Tighten the guide fence locking knob to secure in place.
1 Loosen the depth locking
screw.
The depth stop can be adjusted to restrict the depth of the plunge
action. This allows you to create a cut at a desired depth.
3 Secure the cutting depth by
tightening the depth locking
screw.
2 Adjust the cutting depth
using the depth scale.
Depth of Cut
2 Lower the circular saw
body, plunging the blade
into the work piece.
The supplied dust extraction adaptor can be tted to the mini circular
saw to help remove dust, chips and cutting debris away from the
cutting area.
1 Connect the end of the dust extraction adaptor to the dust port
on the tool.
2 You can now connect a suitable vacuum or dust extractor to the
other end of the adaptor.
Guide Fence
Dust Extraction Adaptor
Loading...