Ozito OZSS2400WA Operating Instructions Manual

SILENT SHREDDER

2400W MODEL NO. OZSS2400WA

OPERATING INSTRUCTIONS

www.ozito.com.au

Always Wear Eye, Face & Ear Protection

SPECIFICATIONS - MODEL NO. OZSS2400WA

Motor: S6(40%):2400W, S1:2000W

Duty type: S1: continuous running duty;

S6: continuous-operation periodic duty.

(4min. full load, 6min. no load)

Voltage: 230-240V ~ 50Hz
No load speed: 46/min
Max. cutting diameter: 40mm
Net weight: 24kg
Noise level: LPA82 dB (A)

LWA94 dB (A)

Protection Class: 1 (earthed appliance)

Features: Internal no voltage release safety switch

Large On/Off safety buttons
Self feeding
Auto reverse switch
Induction motor

1. Large On/Off safety switch

2. Handle

3. Allen-Key and storage

4. Feeding hopper

5. Cutter adjustment bolt

6. Discharge chute

7. Axle

8. Wheels & caps

9. Stabilising legs/stand

10. Powerful 2400W induction motor

11. Direction control knob

7

6

10

4

2

5

8

1

3

9

11

1

TABLE OF CONTENTS

2

SPECIFICATIONS - MODEL NO. OZSS2400WA …….

TABLE OF CONTENTS…………………………………..

INTRODUCTION………………………………………...

SAFETY INSTRUCTIONS………………………………..

OPERATION ……………………………………………..

MAINTENANCE …………….…………………………..

CONTENTS ……………………………………………...

WARRANTY………………………………………………

Page 1

Page 2

Page 3

Page 6

Page 8

Page 10

Page 12

Page 13

INTRODUCTION

3

Warning! When using mains-powered tools, basic safety precautions, including
the following, should always be followed to reduce risk of fire, electric shock,
personal injury and material damage.

Read the whole manual carefully and make sure you know how to switch the
tool off in an emergency, before operating the tool.

Save these instructions and other documents supplied with this machine for
future reference.

The electric motor has been designed for one voltage only. Always check that the
power supply corresponds to the voltage on the rating plate.

Note: The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective. When using an extension lead
on a reel, always unwind the lead completely. Use of an extension lead not suitable
for the power input of the tool or which is damaged or defective may result in a
risk of fire and electric shock. If the supply cord is damaged, it must be replaced by
an electrician or power tool repairer in order to avoid a hazard.

Congratulations on purchasing an Ozito Silent Shredder. We
aim to provide quality tools at an affordable price. We hope
you will enjoy using this machine for many years.

Your Silent Shredder OZSS2400WA has been designed for
shredding organic material such as dry plant residue, twigs,
sticks and branches up to 40mm thick. It is intended for DIY
use only.

SAFETY INSTRUCTIONS

ELECTRICAL SAFETY

GENERAL

4

1. Keep work areas clean. Cluttered work areas and benches can cause accidents.

2. Consider work area environment. Do not expose your tool to high humidity

or rain. Do not use your tool in damp and wet conditions. Keep the work area
well lit. Do not use your tool where there is a risk of causing fire or explosion,
e.g. in the presence of flammable liquids and gases.

3. Keep children away. Do not allow children, visitors or animals to come near
the work area or to touch the tool or power lead.

4. Dress appropriately. Do not wear loose clothing or jewellery, as these can be
caught in moving parts. Preferably wear non-slip footwear when working
outdoors. Wear protective hair covering to keep long hair out of the way.

5. Head protection. Always use safety glasses. Use a face or dust mask whenever
the operations may produce dust or flying particles. Wear ear protection
whenever the sound level seems uncomfortable.

6. Guard against electric shock. Prevent body contact with earthed or grounded
surfaces (e.g. pipes, radiators, cookers and refrigerators). Electric safety can be
further improved by using a high sensitivity (30 mA / 30 ms) residual current
device (RCD).

7. Do not overreach. Keep proper footing and balance at all times.

8. Stay alert. Watch what you are doing. Use common sense. Do not operate the

tool when you are tired.

9. Secure work piece. Use clamps or a vice to hold the work piece; it is safer as it
frees both hands to operate the tool.

10. Remove adjusting keys and wrenches. Always check that adjusting keys and
wrenches are removed from the tool before operating the tool.

11. Extension leads. Before use, inspect the extension leads and replace if
damaged. When using the tool outdoors, only use extension leads intended for
outdoor use and marked accordingly.

12. Use appropriate tool. The intended use is described in this instruction manual.
Do not force small tools or attachments to do the job of a heavy duty tool. The
tool will do the job better and safer at the rate for which it was intended. Do
not force the tool.

Warning! The use of any accessory or attachment, or performance of any
operation with this tool other than those recommended in this instruction
manual may present a risk of personal injury.