Ozito OZPL650A Operation Manual

Planer

82mm - 650 Watt

Operation Manual
3 Year Replacement Warranty

OZPL650A

To view the full range visit: www.ozito.com.au

0209

Motor size: 650W
Input: 230 - 240V ~ 50Hz
No load speed: 17,000 /min
Planing width: 82mm
Planing depth: 0 – 2mm
Rebating depth: 0 – 8mm
Blade type: 82mm Tungsten carbide reversible

slither blades

Features: Positive stop depth settings

Rebating facility
Guide fence included

1.0

1.5

2

SPECIFICATIONS – MODEL NO. OZPL650A

1. Depth adjustment

4. Soft grip rear handle

2. Debris chute 5. Front shoe with chamfering groove

3. Lock off safety switch 6. Fence securing hole

6

1

4

2

5

3

INTRODUCTION

SAFETY INSTRUCTIONS

ELECTRICAL SAFETY

3

Congratulations on purchasing an Ozito Planer. We aim
to provide quality tools at an affordable price. We hope
you will enjoy using this tool for many years.

Your Ozito Planer OZPL650A has been designed for
planing timber and is intended for DIY use only.

Warning! When using mains-powered equipment, basic safety
precautions, including the following, should always be followed to
reduce risk of fire, electric shock, personal injury and material damage.

Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for

future reference.

The electric motor has been designed for 230V and 240V only. Always
check that the power supply corresponds to the voltage on the rating plate.

Note: The supply of 230V and 240V on Ozito tools are interchangeable
for Australia and New Zealand.

If the supply cord is damaged, it must be replaced by an electrician or a
power tool repairer in order to avoid a hazard.

Note: Double insulation does not take the place of normal safety
precautions when operating this tool. The insulation system is for added
protection against injury resulting from a possible electrical insulation
failure within the tool.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of
this tool. Before use, inspect the extension lead for signs of damage, wear
and ageing. Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always unwind the lead
completely. Use of an extension lead not suitable for the power input of
the tool or which is damaged or defective may result in a risk of fire
and/or electric shock.

4

GENERAL

1. Keep work areas clean. Cluttered work areas and benches can cause

accidents.

2. Consider work area environment. Do not expose your tool to high humidity

or rain. Do not use your tool in damp or wet conditions. Keep the work area
well lit. Do not use your tool where there is a risk of causing fire or explosion,
e.g. in the presence of flammable liquids and gases.

3. Keep children away. Do not allow children, visitors or animals to come

near the work area or to touch the tool or power lead.

4. Dress appropriately. Do not wear loose clothing or jewellery, as these can

be caught in moving parts. Preferably wear non-slip footwear when working
outdoors. Wear protective hair covering to keep long hair out of the way.

5. Head protection. Always use safety glasses. Use a face or dust mask

whenever the operations may produce dust or flying particles. Wear ear
protection whenever the sound level seems uncomfortable.

6. Guard against electric shock. Prevent body contact with earthed or

grounded surfaces (e.g. pipes, radiators, cookers and refrigerators).
Electric safety can be further improved by using a high sensitivity
(30 mA / 30 mS) residual current device (RCD).

7. Do not overreach. Keep proper footing and balance at all times.

8. Stay alert. Watch what you are doing. Use common sense. Do not

operate the tool when you are tired.

9. Secure work piece. Use clamps or a vice to hold the work piece; it

is safer as it frees both hands to operate the tool.

10.Remove adjusting keys and wrenches. Always check that adjusting keys

and wrenches are removed from the tool before operating the tool.

11.Extension leads. Before use inspect the extension leads and replace if

damaged. When using the tool outdoors, only use extension leads
intended for outdoor use and marked accordingly.

12.Use appropriate tool. The intended use is described in this instruction

manual. Do not force small tools or attachments to do the job of a heavy
duty tool. The tool will do the job better and safer at the rate for which it
was intended. Do not force the tool.

Warning! The use of any accessor

y or attachment, or per

for

mance of any
operation with this tool other than those recommended in this instruction
manual may present a risk of personal injury.