Ozito OZMCS2000WB Operating Instructions Manual

METAL CUT-OFF SAW

2000W MODEL NO. OZMCS2000WB

OPERATING INSTRUCTIONS

To view our entire range visit

www.ozito.com.au

SPECIFICATIONS - MODEL NO. OZMCS2000WB

Motor size: 2000W
Input: 230-240V ~ 50Hz
No load speed: 3,500/min
Net Weight: 20kg
Cutting Capacity: @90º - 115mm

Cutting disc max. diameter: 355 x 3mm (14" x 1/8'')
Base size: 465 x 265mm
Vice mechanism: Sliding jaws with quick-release mechanism
Cutting angle capacity: 0-45°
Arbour size: 25.4mm
Protection class: 1 (earthed appliance)

Features: Cutting capacity 115mm

1. Switch handle

2. Switch

3. Lock-off button

4. Upper guard

5. Spindle lock

6. Lower guard

7. Cutting disc

8. Spark deflector

9. Fence

10. Vise

11. Vice screw

12. Vice handle

13. Base

14. Rubber foot

15. Motor housing

16. Motor cover

17. Brush cap

18. Carry handle

19. Quick-release vice lock

20. Lock-down chain

21. Depth stop

22. Wrench

@45º - 110mm

Quick-release vice
0-45° Cutting angle capacity
Spindle lock
Carry handle

17

16

15

8

14

18

21

1

2

3

4

5

6

7

9

10

11

12

13

19

20

1

22

TABLE OF CONTENTS

SPECIFICATIONS…………………………………………

TABLE OF CONTENTS…………………………………..

INTRODUCTION………………………………………...

SAFETY INSTRUCTIONS………………………………..

OPERATION ……………………………………………..

MAINTENANCE …………….…………………………..

CONTENTS ……………………………………………...

WARRANTY………………………………………………

Page 1

Page 2

Page 3

Page 3

Page 7

Page 9

Page 10

Page 11

2

INTRODUCTION

Congratulations on purchasing an Ozito Metal Cut-Off Saw.
We aim to provide quality tools at an affordable price.
We hope you will enjoy using this tool for many years.

Your Metal Cut-Off Saw OZMCS2000WB has been
designed for the easy cutting of metal. It is intended
for DIY use only.

SAFETY INSTRUCTIONS

Warning! When using mains-powered tools, basic safety precautions,

!

!

including the following, should always be followed to reduce risk of fire,
electric shock, personal injury and material damage.

Read the whole manual carefully and make sure you know how to switch the
tool off, in an emergency, before operating the tool.

Save these instructions and other documents supplied with this machine for
future reference.

ELECTRICAL SAFETY

The electric motor has been designed for 230V and 240V only. Always check that
the power supply corresponds to the voltage on the rating plate.

Note: The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand.

This tool is earthed in accordance with AS/NZS3100:2002+A1+A2+A3.

If the supply cord is damaged, it must be replaced by an electrician or a power tool
repairer in order to avoid a hazard.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always unwind the lead completely. Use of
an extension lead not suitable for the power input of the tool or which is damaged
or defective may result in a risk of fire and electric shock.

3