Ozito OZLT550WA Instruction Manual

LINE
TRIMMER

550W 300mm

INSTRUCTION MANUAL

SPECIFICATIONS

Voltage: 230-240V ~ 50Hz
Power: 550W
No Load Speed: 9,600/min
Cutting Diameter: 300mm
Line Diameter: 1.6mm
Noise Level: 96dB
Feed Type: Automatic
Weight: 2.6kg

OZLT550WA

WHAT’S IN THE BOX

Line Trimmer

Safety Guard

Adjustable Handle

Assembly Screws

Edging Wheel

IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It

Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: carbon brushes,
etc.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other
than that specified on the tool.

• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the
instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.

OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.

ozito.com.au

0514

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to
the online manual.

1 Hold the telescopic latch

downward.

1 Line up the two parts of

the telescopic handle
assembly.

3 Adjust the working height

by selecting the required

notch on the lower handle.

2 Slide the lower handle to

the required notch and

release the latch.

2 Hold the telescopic latch

downward while inserting
the lower end into the
upper handle.

1 Adjustable Handle

2 Lock Button

3 Edging Guide

4 On/Off Trigger

5 Telescopic Latch

6 Telescopic Shaft

7 Adjustable Head Lock Button

8 Cord Retainer

9 Rotatable Main Handle

10 Power Cord

11 Edging Wheel

12 Cutter Head

13 Safety Guard

14 Motor Housing

15 Assembly Screws

LINE TRIMMER

ACCESSORIES:

KNOW YOUR PRODUCT

1 2 3 4 5 6 87

15

1. TELESCOPIC HANDLE

SETUP & PREPARATION

Adjusting the Working Height

Assembling the Telescopic Handle

WARNING! ENSURE THE TOOL IS DISCONNECTED FROM

THE POWER SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.

9

10

14131211