Ozito OZCM44A Operation Manual

Cement Mixer

370 Watt

Operation Manual
1 Year Replacement Warranty

OZCM44A

To view the full range visit: www.ozito.com.au

0209

Input: 230 – 240V ~ 50Hz
Motor Size: 370W
Motor Speed: 1440/min
Drum Speed: 23-26/min
Gross Drum Volume: 220 Litres (7.7 cu ft)
Unmixed Dry Volume: 170 Litres (6 cu ft)
Mixed Wet Volume: 125 Litres (4.4 cu ft)
Drum Mouth: Ø470mm (181/2")
Weatherproof Rating: IP44
Weight: 63kg

Features: Quick Assembly

Easy Dump Control Handle
Pneumatic Wheels
Robust Steel Construction
Versatile Mixing Applications

2

SPECIFICATIONS – MODEL NO. OZCM44A

1. Drum

2. Motor Cover

3. Dump Control Handle

4. Drum Lock Mechanism

5.

Frame

6.

Rear Leg

7. Pneumatic Wheel

8. Drum Rotation Base

1

5

6

2

7

8

3

4

3

TABLE OF CONTENTS

SPECIFICATIONS…………………………………………

TABLE OF CONTENTS…………………………………..

INTRODUCTION………………………………………...

SAFETY INSTRUCTIONS………………………………..

ASSEMBLY………………………………………………..

OPERATION ……………………………………………..

MAINTENANCE …………….…………………………..

CONTENTS ……………………………………………...

WARRANTY………………………………………………

Page 2

Page 3

Page 4

Page 4

Page 8

Page 9

Page 10

Page 11

Page 12

INTRODUCTION

SAFETY INSTRUCTIONS

ELECTRICAL SAFETY

4

Congratulations on purchasing an Ozito Cement Mixer.
We aim to provide quality tools at an affordable price.
We hope you will enjoy using this tool for many years.

Your Ozito Cement Mixer OZCM44A has been designed
to mix cement, feeds, fertilizers, potting soils and the like.
It is intended for DIY use only.

Warning! When using mains-powered equipment, basic safety
precautions, including the following, should always be followed to reduce
risk of fire, electric shock, personal injury and material damage.

Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for

future reference.

The electric motor has been designed for 230V and 240V only. Always check that the
power supply corresponds to the voltage on the rating plate.

Note: The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand.

If the supply cord is damaged, it must be replaced by an electrician or a power
tool repairer in order to avoid a hazard.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always unwind the lead completely. Use of
an extension lead not suitable for the power input of the tool or which is damaged
or defective may result in a risk of fire and/or electric shock.

It is recommended that the extension lead is a maximum of 25m in length. Do Not
use multiple extension leads.

!

!