Ozito MSW-3000U Original Instructions Manual

MULTI
PURPOSE
SAW

500W

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Input: 500W
Voltage: 230-240V ~ 50Hz
No Load Speed: 500-3000 /min
Stroke Length: 12mm
Blade Fitment: Universal
Cutting Capacity: Timber 100mm
Aluminium 6mm
Mild Steel 3mm
Weight: 2.5kg

MSW-3000U

WHAT’S IN THE BOX

Multi-purpose Saw

Blades x 3

ozito-diy.co.uk

Hex Key

Spare Brushes

WARRANTY

OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

0716

All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.

CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

KNOW YOUR PRODUCT

1 Universal Blade

2 Front Handle

3 Variable Speed Dial

4 Safety Lock-off Switch

5 On/off Trigger

6 Rear Handle with Sure Grip

7 Spare Brushes

8 Hex Key

9 Metal Blade

10 Scrolling Blade

11 General Purpose Blade

1. FITTING BLADES

1. Insert the hex key into the blade locking screw. Turn anti­clockwise to loosen the screw but do not remove it completely.

2. Insert the blade. Locate the hole in the blade over the
retaining pin and between the clamping plate and holder
shaft.

ACCESSORIES

SETUP & PREPARATION

MULTIPURPOSE SAW

Before you make any adjustments, make sure the power cord
is disconnected from the electricity supply.

3. Tighten the blade locking screw with the hex key.

Note: Periodically check that the blade is properly secured.

OPERATION

2. CONTROLS 3. OPERATING THE MULTIPURPOSE SAW

1. Pull the safety lock-off
switch down and hold.

1. Scroll through the variable
speed dial to select the
appropriate speed for the
material being cut.

1. Securly clamp the workpiece.

3. Apply the saw to the workpiece, guide the blade back and forth in
a sawing motion to complete the cut.

2. Turn the multipurpose saw
on and wait for it to reach full
speed.

NOTE: ONLY SUPPLY SUFFICIENT PRESSURE TO

ALLOW THE BLADE TO DO THE CUTTING. DO
NOT FORCE THE OPERATION. BLADES COULD BE
DAMAGED IF EXCESSIVE PRESSURE IS APPLIED.

The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.

On/Off Switch

2. Squeeze the on/off
trigger.

Variable Speed Dial

3. To turn off, release the
on/off trigger.