Ozeri OZF5 User Manual

Model No: OZF5

The images in this manual are for illustration purposes only and may vary slightly from actual product.

360 Tower Fan

Important Safety Instructions

Thank you for purchasing the Ozeri 360 Tower Fan. This product
has passed extensive quality assurance tests for residential use.
Every care has been taken to ensure that it reaches you in perfect
condition.

Warning: When using electric appliances, basic safety precautions

personal injury, including (but not limited to) the following:

Read all these instructions before attempting to operate this
product and save these instructions for future reference:

2



THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN

THE OTHER). TO REDUCE THE RISK OF ELECTRICAL SHOCK, THIS PLUG IS
INTENED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. MATCH THE
WIDE BLADE OF THE PLUG TO THE WIDE SLOT OF THE OUTLET. FULLY
INSERT. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE
PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN.
DO NOT ATTEMPT TO BUPASS THIS SAFETY FEATURE.



A loose t between the AC outlet (receptacle) and plug may cause

overheating and a distortion of the plug. Contact a qualied electrician
to replace loose or worn outlet.



Use this fan only as described in this manual. Other use not

recommended as it may cause re, electric shock or injury to persons.



Check the voltage indicated on the rating plate. This fan is designed for

a 120V-60Hz electric supply. Make certain the power source conforms
to these electric requirements. Make sure the room where this fan will
be used has a working smoke detector.



Do not use an electrical extension cord with this fan. Do not plug the

fan into a power strip. The use of such devices may create electric
and/or re hazards.



Do not force your ngers through the front of the case. Do not allow

any foreign objects through the front of the case.



Close supervision is necessary when any appliance is used by or near

children. This product is not a toy. Do not allow children to tamper with
the fan.



Be careful not to allow hair, curtains, tablecloth, clothes or other nearby

objects block the airways of the fan or to enter the openings of the fan.
This can cause damage and/or injuries.



Do not operate the fan with a damaged cord or plug of if the product

malfunctions, is dropped or damaged in any manner. Periodically check
the electric cable of this fan.



Do not operate if the fan housing is damaged.

3



If the electric cable is damaged, it must be replaced by the manufacturer,

its after-sales service or by a similar qualied person in order to avoid
danger.



This product is intended for household use ONLY and not for commercial,

industrial or outdoor use. Do not use this fan with any solid state speed
control devices.



Avoid contact with moving fan parts.



Do not use this fan in a damp area such as a bathroom. Place the fan on a

dry level surface.



Do not use this fan on a window, ledge, or on any unstable platform. The

fan should only be used standing on its base. Never lay the fan on its side.



To protect against electric shock, do not place fan in window, immerse

unit, plug or cord in water or spray with liquids. This may create an
electric hazard.



Do not place the electrical cord under any objects, such as carpets, throw

rugs or runners. Do not place electrical cord in areas of foot trac where
there is a risk of stumbling or tripping over it. Do not place the fan or any
parts near an open ame, cooking or other heating appliance.



Turn the fan OFF and unplug the fan from the outlet when not in use,

when moving the fan from one location to another and before cleaning.
Before unplugging the fan, rst ensure it has been turned o.



To disconnect the fan, rst turn the unit OFF, grip the plug and pull it

from the wall outlet. Never pull the plug by the cord.



Do not operate the fan in an area where gasoline, paint supplies or any

ammable liquids or explosive chemicals are used or stored.



This product employs overload protection (fuse). A blown fuse indicates

an overload or short-circuit situation. If the fuse blows, unplug the
product from the outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check
the product. If the replacement fuse blows, a short-circuit may be present
and the product should be discarded or returned to an authorized
service facility for examination and/or repair.



Do not operate any fan with a damaged cord or plug. Discard fan or

return to an authorized service facility for examination and/or repair. Do
not try to repair or disassemble this fan. Doing so will void the warranty
and may result in damage and/or personal injury. There are no end-user
serviceable parts.



Do not hang or mount fan on a wall or ceiling.



Remote control devices for other appliances may interfere with this fan

and vice-versa. If this occurs, move the fan to another location.



The use of attachments not recommended by the manufacturer may be

hazardous.



Always store the remote control inside the fan’s remote control

compartment.



This fan is not suitable for use in agricultural facilities and hazardous

locations. This fan does not meet the requirements of NEC Article 547-7
and 500 (2002).

Parts of the Fan

1. Remote Control Compartment

with Control Panel

2. LED Display

3. Grille

4. Base

5. Remote Control

4

1

2

3

4

5

Assembly Instructions

Check contents – keep packaging and
user instructions for future reference.

STEP 1:

Assemble the base by aligning the
two half circle pieces together.

[01]x1

[02]x2

[03]x3