OZ Charge OC-JS1500 User Manual

Model: OC-JS1500
Designed and Made for Australian and New Zealand Conditions
Safety Precautions
NEVER allow the negative and positive leads, on this unit, to touch each other or the same metal object as a short circuit will occur and possibly cause damage, injury or death.
Although the Jumpstart is water resistant and may be used outdoors, DO NOT leave it exposed to the elements. Avoid direct sunlight, direct heat, rain/moisture etc.
The OC-JS1500 Jumpstarter is designed for use with 12V systems ONLY.
Do not operate the Jumpstart if any of the cables are damaged. Consult your
dealer for repair or replacement of the parts.
Do not operate the Jumpstarter if the case is damaged. Consult your dealer or
a certied person for inspection and repair.
Ensure the vehicle battery posts and battery clamps are clean and free of corrosion before use.
When connecting the Jumpstarter leads to a battery, ensure the POWER dial is OFF, and ALWAYS connect the RED, (positive, +ve) clamp to the
UNEARTHED
battery terminal
FIRST
, then connect the BLACK, (negative, -ve) conductor to the chassis or suitable engine
bolt, well away from the battery and fuel line - This will prevent short circuits and possible re.
To prevent battery overheating and consequent damage, do not exceed our recommendations for jump starting.
When jumpstarting ensure the area is well ventilated as batteries can release harmful gases.
ALWAYS wear suitable
protective clothing and eye protection when working with
lead acid batteries.
The Jumpstarter is NOT to be used as a replacement for a vehicle battery.
DO NOT attempt to BOOST CHARGE the Jumpstarter’s sealed battery.
DO NOT allow the battery, at any time, to become completely discharged.
WARNING! It is possible that some electronic equipment could be damaged by
jump starting. ALWAYS check the manufacturers handbook for safety information.
s
Model No. OC-JS1500 Battery Sealed Lead Acid Voltage 12 Volts DC Nominal Capacity 38 Amp-Hour 600 Cranking Amps (1500 Peak) Cable Size 4 AWG ( 20 mm ) Power Source Cigarette Lighter Socket (5 Amps) Work Light 0.5 Watt L.E.D.
Guarantee
Features and Use
The OC-JS1500 is a rechargeable 12 Volt jumpstarter which can be used to start a car in the event of a
battery. The unit can also be used to power such things as Mobile Phone Cargers, Radios, Electric Coolers etc. via cigarette lighter type socket. The unit also incorporates a built in work lamp and may be used as a stand alone light source.
An audible warning will sound in the event of low battery voltage, or if the clamps are incorrectly
for jump starting (wrong polarity).
1 Positive Battery Connection Lead
to connect to positive the battery terminal
2 Lamp
to provide light for roadside repairs or emergency situations
3 12 DC Charger Input Socket connects the supplied chargers to charge the internal battery
4 240 Volt AC Charger to charge the internal battery pack at home or garage
5 Cigar Lighter Adaptor
to charge the internal battery pack in your car or boat
6 ON/OFF Switch
7
Voltage Meter
to indicate the voltage level of the internal battery or charging status
9
Cigar Lighter Socket
used to power small external devices (Fig. 1)
8
Voltage Test Switch
press to indicate the internal battery power level
10
Lamp ON/OFF Switch
switches the lamp ON or OFF
11
Negative Battery Connection Lead
to connect to the negative battery terminal
2
1
4
5
6
8
10
11
11
9
Fig. 1
3
Zylux Distribution Pty. Ltd. (OzCharge) warrants that this product will be free from manufacturing defects for a period of 12 months from the date of purchase. For more information regarding warranty, please contact Zylux Distribution by the details on the back page of this user guide.
engages the jumpstarting leads
5
5
7
Loading...
+ 5 hidden pages