OYPLA Home 3940 User Manual

80w Tubular Heater

USER MANUAL Model No: 3940

User Manual

Safety Instructions

Notice: Ensure you read and fully understand instructions before use

While every attempt is made to ensure the highest degree of protection in all equipment, we cannot

guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on

this condition, which no representative of the company can waive or change.

• It is important that the Tubular Heater is mounted horizontally to a wall at low-level.

• Do not mount below a socket outlet.

• Any shelving placed above the Tubular Heater must be at a distance of at least 20cm.

• Air should be allowed to freely circulate around the Tubular Heater to avoid

overheating.

• The surface of the Tubular Heater can get very warm; in order to avoid overheating,

do not cover.

• Children or elderly individuals should not be left unsupervised in the vicinity of the

heater.

• Precautions should be taken to ensure that direct contact with the heater cannot

occur.

• This product is not a toy, and should only be used for its designated purpose.

• Wiping over with a damp cloth and finishing with a soft dry cloth can maintain the

finish of your Tubular Heater. This should be carried out when the tube is cold and

switched off.

• Do not use abrasive cleaning powders or metal polish on any part of the tube.

• The Tubular Heater is suitable for operation for a 230V BS Plug as shown on the

identity level.

• If the product is damaged or has any defects, please contact [e-mail]

USER MANUAL Model No: 3940