Adjustable Single Clothes Rail
User Manual
USER MANUAL Model No: 3627
• This product is not a toy and should only be used for its designated purpose.
• Make sure that all poles are secure before applying any weight to the product.
• This product is intended for indoor use only.
• Do not carry out alterations or modifications to this product.
• Do not discard any of the packaging until you have checked that you have all the
parts and fittings required.
• Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
• If the product is damaged or has any defects, please contact cservice@oypla.com
DO NOT EXCEED THE 15KG WEIGHT LIMIT
USER MANUAL Model No: 3627
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
Please retain a copy of all instructions for future
consultation.
Parts List:
If you are missing any of the below parts please contact cservice@oypla.com
Please be aware that you will be referring to this parts list throughout the assembly process.
Operating Instructions
USER MANUAL Model No: 3627
1. Take a base platform and insert two wheels
either end, ensuring that they pop into the
holes and are secure. Repeat this step with
the remaining base platform and two wheels.
See the image to the right.
USER MANUAL Model No: 3627
2. Push a lower rail pole into the top of the base platform, ensuring it is held tightly in place. Once done, slide the
height adjustment cap onto the lower rail pole and untighten the top. After this, lower an upper rail pole into the
height adjustment cap and the lower rail pole. When the upper rail pole is at your ideal size, simply tighten the height
adjustment cap. Repeat this with the other base platform. Please see the images above.
3. Push both of the base connection poles into the holes found in the side of the completed base platforms. Once done,
push the other completed base platform onto the ends of the base connection poles, ensuring that it is secure once it
is in. See the image above.
4. Attach a corner support onto the top of one of the upper metal poles. Make sure to push it down as far as possible
as to avoid it easily becoming loose over time. After this, push the remaining upper metal pole into the corner support.
Once done, attach the remaining corner support onto the other end of the upper metal pole and push it down onto
the upper metal pole that is inside the height adjustment pole. Please see the image above.
Lower Rail Pole
Height Adjustment Cap
Upper Rail Pole
Loading...