Oypla 4010 User Manual

Workbench

User Manual

USER MANUAL Model No: 4010

USER MANUAL Model No: 4010

DO NOT EXCEED THE 175KG WEIGHT LIMIT

Safety Instructions

Notice: Ensure you read and fully understand instructions before use

While every attempt is made to ensure the highest degree of protection in all equipment, we cannot

guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on

this condition, which no representative of the company can waive or change.

• This product should only be used for its designated purpose. Not suitable for use by children

or unauthorised persons. Do not use as a ladder.

• Do not carry out alterations or modifications to this product.

• This product contains small parts that could be a choking hazard if swallowed. Keep these

items away from children.

• Do not discard any of the packaging until you have checked that you have all the parts and

fittings required.

• Make sure all fastenings are tightly in place and that everything is in order before using the

product. This should be checked periodically by an adult.

• Never exceed the maximum load capacity of 100kg, or it may result in product failure and/or

personal injury.

• Leaving the product outside exposed to weather, especially direct sun, rain and salt air, will

speed with the weathering process. This can be slowed by removing the product from these

conditions, or covering it with a suitable cover.

• Only use on a stable, level and dry ground.

• Keep fingers, hair and loose clothing free from clamper at all times.

• Use the correct fixings as indicated. Do not tighten any of the nuts until the unit is completely

assembled, then finish by tightening all nuts. All nuts must be tightened before use.

• Keep away from fire.

• Clean only with a damp cloth. Do not use strong industrial cleaning substances.

• If the product is damaged or has any defects, please contact [e-mail]