Oypla 3920 User Manual

User Manual

USER MANUAL Model No: 3920

Hot Air Gun

• The product should only be connected to a 240V AC, 50Hz electrical outlet.

• Never leave the product unattended whilst it is switched on.

• If you have to leave the product unattended, even for a short while, always switch

it off.

• Keep the product out of children’s reach and do not allow children to use it.

• Never use near flammable materials or gasses.

• Inspect the mains lead regularly. Never use the product if the mains lead or plug

has been damaged in any way.

• Do not place the mains lead on or near any hot surface.

• Do not touch the product if your hands are moist or wet.

• Never use the heat gun as a hair dryer.

• Never direct the hot airflow towards people or animals.

• Never obstruct the hot airflow by blocking or covering the air outlet.

• Never touch the nozzle to any surface when using the gun or shortly after using.

• Keep the handle dry and clean, free from oil or grease.

• Always store the gun in an upright position.

• Never use the gun in the rain or n extremely damp days.

• Never poke anything down inside the hot air nozzle.

• Always allow the heat gun to cool down completely before storage.

• If the product is damaged or has any defects, please contact [e-mail]

Safety Instructions

Notice: Ensure you read and fully understand instructions before use

While every attempt is made to ensure the highest degree of protection in all equipment, we cannot

guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold

on this condition, which no representative of the company can waive or change.

USER MANUAL Model No: 3920